Maintenance
#26
Junior Member
Join Date: Jul 2020
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
So far I have found minimal maintenance to work the best.
The more cleaning and oiling you do, the more the drive train seems to pick up grime.
The chain is always very well greased from the package, just add some dry lube once a week and you'll be good for many months.
A dry chain with just a bit of grease on it will minimize the dirt and sand that can stick.
The more cleaning and oiling you do, the more the drive train seems to pick up grime.
The chain is always very well greased from the package, just add some dry lube once a week and you'll be good for many months.
A dry chain with just a bit of grease on it will minimize the dirt and sand that can stick.
#27
Senior Member
The internet certainly doesn't have enough posts pointing out that WD40 is mostly solvent carrying a small amount of light oil.
For real though, it's actually pretty good for a few things where both dissolving contaminated lubricates and freeing up parts requiring lubrication is needed, like on shifters with gummy pawls. This should be followed up by a more significant lubricant.
For real though, it's actually pretty good for a few things where both dissolving contaminated lubricates and freeing up parts requiring lubrication is needed, like on shifters with gummy pawls. This should be followed up by a more significant lubricant.
#29
Junior Member
Join Date: Aug 2020
Location: Colleyville, Texas
Posts: 89
Bikes: 1988 Gitane Team Replica, 2022 Trek Top Fuel 9.8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 58 Times
in
35 Posts
Any solvent should be washed away with soapy water and then fresh lubricant should be applied.