Notices
Single Speed and Fixed Gear Marketplace Your Single Speed, Fixed and Track Bike Exchange. Requires upgraded membership (Titanium or Red Star). Private Sales Only, no online storefronts. All prices must be quoted, we are not an auction site.

Wabi Special

Old 08-16-16, 02:43 PM
  #1  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Wabi Special




Frame:
55cm Wabi Special - Anthracite
Fork/Headset:
Wabi / FSA orbit X
Crankset/Bottom Bracket:
Sugino 75 / Protype
Pedals:
Dura Ace 7800
Drivetrain/Cog/Chainring/Chain:
18 soma I think? cog / 49 tooth Sugino / KMC devil 101
Handlebars/Stem:
Civia Emerson OR heat treated nitto mustache YOUR CHOICE/ Nitto UI-85EX
Saddle/Seatpost:
Fizik Arione ( brooks not for sale ) / Nitto Dynamic 626
Brakes:
Cane Creek SCR5 levers / tektro something or other...
Front Wheel/Hub/Tire:
Mavic Open pro / Philwood / Panaracer pasela tourguard
Rear Wheel/Hub/Tire:
Mavic Open pro / Philwood / Panaracer pasela tourguard

I'd like to get $1000 USD for this fine machine that was well maintained. Buyer does pay pal and will pay for a bike flight.

Scrod installed the BB and even sprayed the inside of the frame with frame saver himself which I'm sure adds to the value of the bike.

Selling because I ride this bike maybe a handful of times a year which is a total bummer and I want to get into CX racing so I need to make space / get the funds for another bike.
__________________

Last edited by thewilson; 08-16-16 at 03:31 PM.
thewilson is offline  
Old 08-16-16, 03:05 PM
  #2  
SquidPuppet
Calamari Marionette Ph.D
 
SquidPuppet's Avatar
 
Join Date: Dec 2013
Location: Coeur d' Alene
Posts: 7,862

Bikes: 3 Chinese Gas Pipe Nerdcycles and 2 Chicago Electroforged Boat Anchors

Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 2356 Post(s)
Liked 20 Times in 17 Posts
Add the size to your post.
SquidPuppet is offline  
Old 08-16-16, 03:31 PM
  #3  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by SquidPuppet View Post
Add the size to your post.
Damn it! I knew I missed something! fixed.
__________________
thewilson is offline  
Old 08-16-16, 09:49 PM
  #4  
Scrodzilla
Banned.
 
Join Date: May 2009
Posts: 26,054
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 640 Post(s)
Liked 88 Times in 49 Posts
Originally Posted by thewilson View Post
Scrod installed the BB and even sprayed the inside of the frame with frame saver himself which I'm sure adds to the value of the bike.
Scrodzilla is offline  
Old 08-17-16, 09:29 AM
  #5  
Carcosa
Senior Member
 
Carcosa's Avatar
 
Join Date: Jul 2014
Location: Raleigh
Posts: 1,059
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Liked 0 Times in 0 Posts
Would ride.
Carcosa is offline  
Old 08-18-16, 04:24 PM
  #6  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Carcosa View Post
Would ride.
Please ride.
__________________
thewilson is offline  
Old 08-18-16, 05:47 PM
  #7  
websterrr
Senior Member
 
websterrr's Avatar
 
Join Date: Mar 2011
Location: st. louis
Posts: 236
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 0 Times in 0 Posts
Stretch it two sizes larger and you've got a deal
websterrr is offline  
Old 08-19-16, 03:36 PM
  #8  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by websterrr View Post
Stretch it two sizes larger and you've got a deal
Plenty of seat post left and I never cut the steerer.
__________________
thewilson is offline  
Old 08-23-16, 07:14 PM
  #9  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Might be willing to part out if I can find buyers for the frame/fork/HS/sp clamp ($425), cranks/chain ring/bb ($200) , and wheels/tires/lockring and cog($325)
__________________

Last edited by thewilson; 08-23-16 at 07:20 PM.
thewilson is offline  
Old 08-23-16, 08:10 PM
  #10  
cDiff Notorious
Senior Member
 
cDiff Notorious's Avatar
 
Join Date: Dec 2014
Posts: 273

Bikes: Wabi Classic, Schwinn Madison

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Howd you get the Sugino 75 to fit? I tried it on mine with a 115 ISO Campy bb and the DS crank arm would hit the chainstay every rotation. Same goes with the DA 7600 crank arm
cDiff Notorious is offline  
Old 08-24-16, 04:16 AM
  #11  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by cDiff Notorious View Post
Howd you get the Sugino 75 to fit? I tried it on mine with a 115 ISO Campy bb and the DS crank arm would hit the chainstay every rotation. Same goes with the DA 7600 crank arm
I used a sugino 75 specific bb and Scrod installed it. If I remember correctly there were (at the time) two bbs that were for the 75s. The sugino loose ball and the pro type which I opted for because sealed bearings

Also I'm gonna assume that part of your problem could be using a Japanese crank which probably should use a JIS axle and you're using an Italian ISO axle. Can't confirm, I'm not a mechanic

All that said, buy mine
__________________

Last edited by thewilson; 08-24-16 at 04:20 AM.
thewilson is offline  
Old 08-24-16, 08:46 AM
  #12  
Scrodzilla
Banned.
 
Join Date: May 2009
Posts: 26,054
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 640 Post(s)
Liked 88 Times in 49 Posts
Sugino 75 uses an ISO spindle. The ProType is 109mm ISO.

I've seen a few Wabi frames with crank arm clearance issues. Wilson's is not one of them.
Scrodzilla is offline  
Old 08-24-16, 10:05 AM
  #13  
cDiff Notorious
Senior Member
 
cDiff Notorious's Avatar
 
Join Date: Dec 2014
Posts: 273

Bikes: Wabi Classic, Schwinn Madison

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Just my luck. I tried a DA 7600 with 109 ISO protype before and the arms hit the chainstay. His probably fit cause the frame size is bigger, mine is 49. That or Scrod used some kind of magic
cDiff Notorious is offline  
Old 09-25-16, 12:09 PM
  #14  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
BUMP. I'm open to REASONABLE offers, parting out and even interesting trades...
__________________
thewilson is offline  
Old 10-02-16, 07:17 PM
  #15  
kingston 
Jedi Master
 
kingston's Avatar
 
Join Date: Sep 2014
Location: Lake Forest, IL
Posts: 3,399

Bikes: https://stinkston.blogspot.com/p/my-bikes.html

Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 1502 Post(s)
Liked 297 Times in 195 Posts
There's a
for sale on ebay right now. Understanding that it's not an apples-to-apples comparison, you may want to watch to see what used Wabis are going for.

Edit: I don't know why it's putting that gigantic picture in the post. That's new for me, and I can't figure out how to make it go away.
kingston is offline  
Old 10-03-16, 08:52 AM
  #16  
Scrodzilla
Banned.
 
Join Date: May 2009
Posts: 26,054
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 640 Post(s)
Liked 88 Times in 49 Posts
That's a terrible comparison considering the components on the eBay bike are nowhere near as good as the on the one being offered here.

Wilson's crankset and wheels are worth nearly $500 on their own.
Scrodzilla is offline  
Old 10-03-16, 07:05 PM
  #17  
kingston 
Jedi Master
 
kingston's Avatar
 
Join Date: Sep 2014
Location: Lake Forest, IL
Posts: 3,399

Bikes: https://stinkston.blogspot.com/p/my-bikes.html

Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 1502 Post(s)
Liked 297 Times in 195 Posts
Originally Posted by Scrodzilla View Post
That's a terrible comparison considering the components on the eBay bike are nowhere near as good as the on the one being offered here.

Wilson's crankset and wheels are worth nearly $500 on their own.
I know what the crankset and wheels are worth. Just trying to be helpful. One data point is better than none, and the bike is not getting a lot of love, not even parted out.
kingston is offline  
Old 10-03-16, 08:00 PM
  #18  
Dougbloch 
Senior Member
 
Join Date: Jan 2016
Location: Alameda, California, USA
Posts: 493
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 133 Post(s)
Liked 4 Times in 2 Posts
What a beauty. Great upgrades. Where is this bike located?
Dougbloch is offline  
Old 10-04-16, 04:18 AM
  #19  
thewilson 
Senior Member
Thread Starter
 
thewilson's Avatar
 
Join Date: Sep 2010
Location: Portland / ME
Posts: 903

Bikes: CAAD10/Wabi

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by Dougbloch View Post
What a beauty. Great upgrades. Where is this bike located?
I'm in Portland Maine. I could also be willing to travel to the Boston area or NH for serious buyers.

Originally Posted by kingston View Post
I know what the crankset and wheels are worth. Just trying to be helpful. One data point is better than none, and the bike is not getting a lot of love, not even parted out.
Luckily I'm not in a rush.
__________________
thewilson is offline  
Old 10-05-16, 02:17 PM
  #20  
50voltphantom
Senior Member
 
50voltphantom's Avatar
 
Join Date: Feb 2014
Location: SD
Posts: 2,734

Bikes: Handsome Fredward, Trek 1.1

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 480 Post(s)
Liked 97 Times in 36 Posts
Those wheels on this bike are just so damn pretty. Someone buy this complete.
50voltphantom is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chadwebster
Road Cycling
0
10-07-12 04:20 PM
AngryScientist
Singlespeed & Fixed Gear
20
09-18-12 02:41 PM
smurray
Singlespeed & Fixed Gear
59
07-31-12 07:29 PM
Steve1436
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
1
07-14-12 11:19 AM
tmh657
Classic & Vintage
3
06-27-10 05:50 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.