1983 Trek 620 advice
#1
Junior Member
Thread Starter
1983 Trek 620 advice
Hey,
I am considering picking up a 1983 Trek 620 that is pretty much all original except handlebars and saddle. Comes with original toe straps.
Price is 600 CAD - I think its on the high end but not too out there.
Any thoughts on what to look out for and if the price is the right ballpark? I would like to actually tour it.
Bike can be found on Kijiji in Nova Scotia. I can't get images to work!
I am considering picking up a 1983 Trek 620 that is pretty much all original except handlebars and saddle. Comes with original toe straps.
Price is 600 CAD - I think its on the high end but not too out there.
Any thoughts on what to look out for and if the price is the right ballpark? I would like to actually tour it.
Bike can be found on Kijiji in Nova Scotia. I can't get images to work!
#2
Senior Member
What's your bike market like up there? That works out to $450 usd. Personally, I wouldn't spend that on a 620 here in my area, unless it was a spotless original.
__________________
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,'81 Merckx, '85 Centurion Cinelli, '85 Raleigh Portage, '92 RB-2, '09 Bianchi
My bikes: '81 Trek 957, '83 Trek 720, '85 Trek 500, '85 Trek 770,
#3
Junior Member
Thread Starter
Its not spotless but looks clean and operational. Everything checks out according to the sales brochure as fair as original goes. The market sucks here - I’ve been looking for an older Trek tour bike for a solid year and this is the first. It’s probably not the last one however.
#4
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,523
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
1984 and 1985 models are much better.
#5
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
I own an 83 600 that I've basically turned into a 620. I also changed wheels to 700 and added fenders. I like it, but think the price is optimistic. It better be in great shape, and have correct bottle cages and racks to boot.
#7
Full Member
Agreed, too high. I picked up an '83 620 with mostly original equipment, few nicks here and there in the paint, for $225 from a resale shop in Chicago. $300 would have felt like too much for a pre-cantilever Trek touring bike. That said, I love the bike.
#9
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,626
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 3084 Post(s)
Liked 6,559 Times
in
3,763 Posts
#11
incazzare.
I think that's a little high. I may be in the minority, but I'd rather have an '83 than an '84-'85 mainly because the paint / decal scheme changed in '84 and I prefer the older style.
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
#12
Full Member
I agree... I recently picked up an 84 620 with cantilever brakes for $290. That’s just what they go for in the Milwaukee/Madison area. I have plans to change the decals to the 1982 style to match my 728.
#13
Senior Member
IMHO it's all about the wheels. Unless they're great then it;s not worth it.
#14
Junior Member
Thread Starter
#15
Bad example
#16
Senior Member
I'm pretty opinionated about old bike wheels. Different parts of a bike wear out over different rates of time. On one end of the spectrum is the frame. With proper care, it may never wear out. The crankset in the middle wears out slowly. At the other end of the spectrum are the wheels. They take on the the direct impact & greatest amount of wear from riding. And, are usually the first major component that gets replaced after a certain period of time. I'm sorry, but the wheels on the bike in that picture look like they have a lot of mileage on them. They look beat. Ready to be replaced. A decent set of wheels & tires for that bike could run you around $300. And, that's if you buy everything & install it yourself. I've bought bikes that look like that for around $100. After installing new wheels, tires, chain, & general cleanup, then it's worth $450 US.
#17
Junior Member
Thread Starter
I'm pretty opinionated about old bike wheels. Different parts of a bike wear out over different rates of time. On one end of the spectrum is the frame. With proper care, it may never wear out. The crankset in the middle wears out slowly. At the other end of the spectrum are the wheels. They take on the the direct impact & greatest amount of wear from riding. And, are usually the first major component that gets replaced after a certain period of time. I'm sorry, but the wheels on the bike in that picture look like they have a lot of mileage on them. They look beat. Ready to be replaced. A decent set of wheels & tires for that bike could run you around $300. And, that's if you buy everything & install it yourself. I've bought bikes that look like that for around $100. After installing new wheels, tires, chain, & general cleanup, then it's worth $450 US.
#18
Senior Member
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
I'm pretty opinionated about old bike wheels. Different parts of a bike wear out over different rates of time. On one end of the spectrum is the frame. With proper care, it may never wear out. The crankset in the middle wears out slowly. At the other end of the spectrum are the wheels. They take on the the direct impact & greatest amount of wear from riding. And, are usually the first major component that gets replaced after a certain period of time. I'm sorry, but the wheels on the bike in that picture look like they have a lot of mileage on them. They look beat. Ready to be replaced. A decent set of wheels & tires for that bike could run you around $300. And, that's if you buy everything & install it yourself. I've bought bikes that look like that for around $100. After installing new wheels, tires, chain, & general cleanup, then it's worth $450 US.
Likes For samkl:
#19
Senior Member
Looks like the original 1983 wheels with a Suntour drive train, plastic spoke protector and, a spin on 6 speed freewheel. That equals 35 year old 27" wheels. Considering that the bike was probably ridden around 1000 to 2000 miles a year, it means the wheels could have up to 75,000 miles on them. It's actually a pretty nice bike with some good potential. But, needs some new parts. So, even in a hot market it's probably worth maybe $175 - $200 USD tops.
#20
Senior Member
Join Date: Feb 2017
Location: Chicago, IL
Posts: 518
Bikes: 2004 Trek 520, resto-modded 1987 Cannondale SR400, rando-modded 1976 AD Vent Noir; 2019 Wabi Classic; 1989? Burley Duet
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 213 Post(s)
Liked 93 Times
in
51 Posts
Looks like the original 1983 wheels with a Suntour drive train, plastic spoke protector and, a spin on 6 speed freewheel. That equals 35 year old 27" wheels. Considering that the bike was probably ridden around 1000 to 2000 miles a year, it means the wheels could have up to 75,000 miles on them. It's actually a pretty nice bike with some good potential. But, needs some new parts. So, even in a hot market it's probably worth maybe $175 - $200 USD tops.
OP, if you check it out and the condition isn’t bad, and you really want the bike, by all means get it. It’s worth way more than $175, especially if you plan to use it. There’s a market value and there’s a use value. What might not be a great deal for a flipper can be an amazing buy for someone who actually rides.
#21
Junior Member
Thread Starter
Things here are more rare and generally cost more then the rest of Canada (and the USA). Right now I’m thinking I’ll take the hr plus drive and check it out.
I was looking for a Trek 520 for over a year, daily, and have not found one. I even had a wanted ad.
Having said that I have purchased two Marinonis, one quite special (a custom race bike from 1982) for less than 250 usd and a perfectly working Bob Jackson for 5 dollars. I actually found 5 dollars just before I saw the bike at a yard sale!
I was looking for a Trek 520 for over a year, daily, and have not found one. I even had a wanted ad.
Having said that I have purchased two Marinonis, one quite special (a custom race bike from 1982) for less than 250 usd and a perfectly working Bob Jackson for 5 dollars. I actually found 5 dollars just before I saw the bike at a yard sale!
Last edited by kidadam; 07-23-18 at 04:07 PM.
#22
Senior Member
[QUOTE=kidadam;20465189]
Things here are more rare and generally cost more then the rest of Canada (and the USA). Right now I’m thinking I’ll take the hr plus drive and check it out.
I'm not trying to talk you out of buying it. I'm just trying to talk you out of paying too much for it.
#23
Senior Member
Join Date: Jul 2011
Location: Denver, CO
Posts: 605
Bikes: 1966 Carlton, 197X MKM, 1983 Trek 620, 1988 Schwinn High Sierra, 1995 DBR Axis Ti, 1999 Waterford, 2016 DBR Release, 2017 Surly Travelers Check
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 65 Post(s)
Likes: 0
Liked 7 Times
in
7 Posts
#24
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,523
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
Original wheels from that era were Helicomatic. Rear Helicomatic hubs tend to be trash. Even if they are OK, cassette replacements are unobtainium.
When I have set up Trek touring bikes from that era, I'll change the wheels just to avoid the risk of leaving them stranded in BFE with 30 year old, obsolete parts. The hub also had oddball ball bearings, 5/32 inch sized, 13 per side or something like that. Meanwhile, some competitors to Trek were using nice Suntour branded cartridge bearing hubs at that time.
To quote Sheldon Brown on these hubs: "these hubs are losers". Personally I'd replace losers with "garbage". Hooking up an otherwise competent steel sport touring or touring bike with such a part is its weak link.
The one really nice thing about these old hubs is collectors want them! Actually, they want the lock rings and cassettes.
When I have set up Trek touring bikes from that era, I'll change the wheels just to avoid the risk of leaving them stranded in BFE with 30 year old, obsolete parts. The hub also had oddball ball bearings, 5/32 inch sized, 13 per side or something like that. Meanwhile, some competitors to Trek were using nice Suntour branded cartridge bearing hubs at that time.
To quote Sheldon Brown on these hubs: "these hubs are losers". Personally I'd replace losers with "garbage". Hooking up an otherwise competent steel sport touring or touring bike with such a part is its weak link.
The one really nice thing about these old hubs is collectors want them! Actually, they want the lock rings and cassettes.
Last edited by wrk101; 07-31-18 at 01:19 PM.
#25
Senior Member
Original wheels from that era were Helicomatic. Rear Helicomatic hubs tend to be trash. Even if they are OK, cassette replacements are unobtainium.
When I have set up Trek touring bikes from that era, I'll change the wheels just to avoid the risk of leaving them stranded in BFE with 30 year old, obsolete parts. The hub also had oddball ball bearings, 5/32 inch sized, 13 per side or something like that. Meanwhile, some competitors to Trek were using nice Suntour branded cartridge bearing hubs at that time.
To quote Sheldon Brown on these hubs: "these hubs are losers". Personally I'd replace losers with "garbage". Hooking up an otherwise competent steel sport touring or touring bike with such a part is its weak link.
The one really nice thing about these old hubs is collectors want them! Actually, they want the lock rings and cassettes.
When I have set up Trek touring bikes from that era, I'll change the wheels just to avoid the risk of leaving them stranded in BFE with 30 year old, obsolete parts. The hub also had oddball ball bearings, 5/32 inch sized, 13 per side or something like that. Meanwhile, some competitors to Trek were using nice Suntour branded cartridge bearing hubs at that time.
To quote Sheldon Brown on these hubs: "these hubs are losers". Personally I'd replace losers with "garbage". Hooking up an otherwise competent steel sport touring or touring bike with such a part is its weak link.
The one really nice thing about these old hubs is collectors want them! Actually, they want the lock rings and cassettes.