Help with programming
#1
Newbie
Thread Starter
Join Date: Dec 2020
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Help with programming
Hi guys I am a retired mechanic who put together a recumbent three wheeler all wheel drive.
I used the Sunseeker Fat tad CSX as Base, and from there I went crazy.
so basically now the trike is fully loaded it has four separate motors,One at each wheel and one at the crank, I also put a mid drive transmission using an Shimano alfine 8 with electronic shift.
it all went together pretty well runs great but now I am wanting to tweak it a bit but having issues with the software and programming, I lack a bit in that area.I’m basically running a cycle analyst version three with three Grin phaserunners anybody out there willing to help me with programming for three Motors on one display?
I used the Sunseeker Fat tad CSX as Base, and from there I went crazy.
so basically now the trike is fully loaded it has four separate motors,One at each wheel and one at the crank, I also put a mid drive transmission using an Shimano alfine 8 with electronic shift.
it all went together pretty well runs great but now I am wanting to tweak it a bit but having issues with the software and programming, I lack a bit in that area.I’m basically running a cycle analyst version three with three Grin phaserunners anybody out there willing to help me with programming for three Motors on one display?
#3
Newbie
Thread Starter
Join Date: Dec 2020
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No I have not mainly problems setting Pedal assist, works fine in the air one on jackstands but when out on the road no assist from pedals.
#4
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,262
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 882 Post(s)
Liked 821 Times
in
620 Posts
The individuals at ebikesca seemed helpful when I asked questions; have you tried them? Also, are you sure that your battery is capable of the challenge? Your last problem suggests maybe not.
#5
Newbie
Thread Starter
Join Date: Dec 2020
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
it definitely won’t be the battery I have a 50 amp hour battery, when on throttle no problem at all,Just pedal assist