Bikesdirect Mini Velo upgrade thread
#76
Junior Member
Join Date: May 2011
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Minor upgrades to Nano
I stopped by https://www.counterbalancebicycles.com after work yesterday and picked up the following:
- blackburn competition cage
- sunlite toe straps
- all city nylon double toe clip medium black (just pull the front reflector off the stock pedals and they fit fine)
- planet bike eco rack - aluminum
Rode 8 miles into work today, I was paranoid about getting a flat so I left the tires super under-inflated. Combined with a strong headwind out of the south, I got a nice workout and a slow ride in. Very nice riding bike though, frame really absorbed the bumpy pavement on the burke gilman trail and going over a couple curbs. Handling is quick but stable, oddly somewhat reminiscent of my old short wheelbase recumbent. I still need to look at the crank and get the rim strips, adjust the rear derailleur (if I can figure out how). I am fine with the stock brake levers and brake pads. Really an extremely good value bike overall.
- blackburn competition cage
- sunlite toe straps
- all city nylon double toe clip medium black (just pull the front reflector off the stock pedals and they fit fine)
- planet bike eco rack - aluminum
Rode 8 miles into work today, I was paranoid about getting a flat so I left the tires super under-inflated. Combined with a strong headwind out of the south, I got a nice workout and a slow ride in. Very nice riding bike though, frame really absorbed the bumpy pavement on the burke gilman trail and going over a couple curbs. Handling is quick but stable, oddly somewhat reminiscent of my old short wheelbase recumbent. I still need to look at the crank and get the rim strips, adjust the rear derailleur (if I can figure out how). I am fine with the stock brake levers and brake pads. Really an extremely good value bike overall.
#77
Member
Join Date: Aug 2007
Location: Santa Monica, CA
Posts: 31
Bikes: Orange Big Dummy, 1970 Schwinn Continental, Dahon Speed TR, Bianchi Via Nirone
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Does anyone have a source for the previous Scorchers without the hideous checker pattern on the side? I've been trying to make up my mind about tires since the bike arrived and would go with the Scorchers if I could get them in just plain black.
#78
Member
Join Date: Aug 2007
Location: Santa Monica, CA
Posts: 31
Bikes: Orange Big Dummy, 1970 Schwinn Continental, Dahon Speed TR, Bianchi Via Nirone
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Rode 8 miles into work today, I was paranoid about getting a flat so I left the tires super under-inflated. Combined with a strong headwind out of the south, I got a nice workout and a slow ride in. Very nice riding bike though, frame really absorbed the bumpy pavement on the burke gilman trail and going over a couple curbs. Handling is quick but stable, oddly somewhat reminiscent of my old short wheelbase recumbent. I still need to look at the crank and get the rim strips, adjust the rear derailleur (if I can figure out how). I am fine with the stock brake levers and brake pads. Really an extremely good value bike overall.
#79
Junior Member
Join Date: May 2011
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No, I think I just didn't cinch the pannier down tight enough with the top closure. My heel did hit the pannier once when I first got on the bike, but it might have been I was in the process of sliding my foot into the pedal/clip/strap. I did not notice any further contact after that.
#80
Member
Join Date: Aug 2007
Location: Santa Monica, CA
Posts: 31
Bikes: Orange Big Dummy, 1970 Schwinn Continental, Dahon Speed TR, Bianchi Via Nirone
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
No, I think I just didn't cinch the pannier down tight enough with the top closure. My heel did hit the pannier once when I first got on the bike, but it might have been I was in the process of sliding my foot into the pedal/clip/strap. I did not notice any further contact after that.
#81
Junior Member
Join Date: May 2011
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I should qualify my statement about clearance with the panniers (mine are older Ortleib ones), turns out you do need to push them as far back as possible. On the rack I purchased this makes it so the rear pannier hook that holds the pannier to the diagonal rack brace doesn't quite attach. Not a problem for my commute, but maybe for longer trips or light loads.
Also I got a flat on the way home after pumping my tires up to proper pressure (maybe over). Was only a mile from https://www.recycledcycles.com/ and was able to purchase some velox tape and patch the tire. Glad one of the mechanics removed the tire for me -- its not easy!
Also I got a flat on the way home after pumping my tires up to proper pressure (maybe over). Was only a mile from https://www.recycledcycles.com/ and was able to purchase some velox tape and patch the tire. Glad one of the mechanics removed the tire for me -- its not easy!
#82
All ur bike r belong Enki
Join Date: Aug 2005
Location: San Fransicko
Posts: 816
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Also I got a flat on the way home after pumping my tires up to proper pressure (maybe over). Was only a mile from https://www.recycledcycles.com/ and was able to purchase some velox tape and patch the tire. Glad one of the mechanics removed the tire for me -- its not easy!
#83
Senior Member
Join Date: Feb 2011
Posts: 70
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just finished complete disassembly down to the last bolt and reassembly. Adjusting the headset and hubs was key. I added Primo Comets (1.5"), old Shimano 600 aero levers and Nitto rando bars. I was initially ho-hum about the bike but the ride is about a million times better now. Just need a Velo Orange threadless stem adapter and a proper length stem and I'll be all set! (Well, I need to figure out fenders too...)
#84
Senior Member
Join Date: Feb 2011
Posts: 70
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Funny, I was a mile away from Recycled when my tube blew too! I guess there are at least two Nanos in Seattle now.
In lieu of a rack I think I'm just going to use a big saddlebag and an old Rivendell Hobo front bag; should be plenty of carrying capacity.
In lieu of a rack I think I'm just going to use a big saddlebag and an old Rivendell Hobo front bag; should be plenty of carrying capacity.
#85
Senior Member
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
I don't find the checkered pattern greatly distracting. Besides, its good for road visibility, especially at night. I find the Scorcher the perfect compromise tire in that its fast and it provides enough comfort to make the small wheel size a tolerable ride, unlike with a thinner tire.
#86
Senior Member
Join Date: Mar 2007
Posts: 5,737
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 147 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
Panaracer is an excellent brand.
The mini velo frame is actually decent but to get that price point, some corners had to be cut, especially with the brakes and bars. Upgrading those can get you a very nice bike!
The mini velo frame is actually decent but to get that price point, some corners had to be cut, especially with the brakes and bars. Upgrading those can get you a very nice bike!
#87
All ur bike r belong Enki
Join Date: Aug 2005
Location: San Fransicko
Posts: 816
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
And with a new seatpost in place, I can finally say I'm done upgrading, and look forward to spending more time riding the bike than I do tinkering with it:
Recap of upgrades:
Drivetrain
Brev.M 165mm cranks
Origin8 54T flat chainring
Surly 15T single-speed cog
Fibonacci spacer kit
Gusset Squire chain tensioner
KMC 3/32" half-link
Shadow Conspiracy Ravager pedals
Tramp Straps pedal straps
Jagwire Comp brake pads
Panaracer Minits Tough 20x1.25 tires
Cockpit
Charge Spoon saddle
Kalloy Laprade 29.2 seatpost
Tektro R100A brake levers
Origin8 Classic Road stem
Recap of upgrades:
Drivetrain
Brev.M 165mm cranks
Origin8 54T flat chainring
Surly 15T single-speed cog
Fibonacci spacer kit
Gusset Squire chain tensioner
KMC 3/32" half-link
Shadow Conspiracy Ravager pedals
Tramp Straps pedal straps
Jagwire Comp brake pads
Panaracer Minits Tough 20x1.25 tires
Cockpit
Charge Spoon saddle
Kalloy Laprade 29.2 seatpost
Tektro R100A brake levers
Origin8 Classic Road stem
#89
Junior Member
Join Date: Jun 2009
Location: Chicago
Posts: 21
Bikes: Dahon Mu Uno, Mercier Mini Velo Nano, 99' Haro Cyclocross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So, I've been trying to remove the bottom bracket from my nano. I was able to get the non-drive side cup out fine, but the drive-side was near impossible without a huge breaker bar. I was eventually able to get it off, and found that there was no grease (the reason why it was so difficult to get it off). I plan on replacing the bottom bracket and crankset tonight, and just wanted to give people a heads up.
#90
Junior Member
Thread Starter
Join Date: Oct 2010
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Liked 0 Times
in
0 Posts
So, I've been trying to remove the bottom bracket from my nano. I was able to get the non-drive side cup out fine, but the drive-side was near impossible without a huge breaker bar. I was eventually able to get it off, and found that there was no grease (the reason why it was so difficult to get it off). I plan on replacing the bottom bracket and crankset tonight, and just wanted to give people a heads up.
Would this be it? : https://www.amazon.com/Park-Tool-Shim...6725641&sr=8-1
Last edited by punkgeek; 05-29-11 at 09:21 PM.
#91
Junior Member
Join Date: Jun 2009
Location: Chicago
Posts: 21
Bikes: Dahon Mu Uno, Mercier Mini Velo Nano, 99' Haro Cyclocross
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thats the tool I used. Remember that the thread is backwards on the drive-side I found an excellent deal on a sora crankset, so I installed an external bearing bottom bracket. Once I got the stock bottom bracket out and added some grease, the installation went smoothly.
#92
Senior Member
Join Date: May 2004
Location: Pacific Northwest
Posts: 3,095
Bikes: Too many....................
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 11 Times
in
6 Posts
Still have a couple of upgrades to go like a new stem and seat post
__________________
Speed Uno
Dawes Kingpin 2speed
Speed Uno
Dawes Kingpin 2speed
#94
Senior Member
Join Date: May 2004
Location: Pacific Northwest
Posts: 3,095
Bikes: Too many....................
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Likes: 0
Liked 11 Times
in
6 Posts
Thank you, I rode it yesterday and it is a kick to ride. When I start getting regular work again I would like to get a Big Shot and put a SA 3 speed on it. I think you would have fun with one of these.
__________________
Speed Uno
Dawes Kingpin 2speed
Speed Uno
Dawes Kingpin 2speed
#95
Senior Member
Join Date: Mar 2010
Posts: 57
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I was thinking of going the internal hub route, too, I wonder if this wheel kit would work?
https://www.utahtrikes.com/PRODINFO-S...Wheel_Kit.html
https://www.utahtrikes.com/PRODINFO-S...Wheel_Kit.html
#97
Senior Member
#99
All ur bike r belong Enki
Join Date: Aug 2005
Location: San Fransicko
Posts: 816
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I was thinking of going the internal hub route, too, I wonder if this wheel kit would work?
https://www.utahtrikes.com/PRODINFO-S...Wheel_Kit.html
https://www.utahtrikes.com/PRODINFO-S...Wheel_Kit.html
#100
Senior Member
I really don't know why this bike doesn't ship with cloth rim tape. The failure rate of the cheap rubber strip is incredibly high, and I'm sure Bikesdirect knows it. The Performance-branded Velox tape only cost my $6, at-cost is probably less than $3. Would it really have killed sales of the bike if they added $3 to the price tag, as opposed to inconveniencing the customer?