Sliding forward in saddle
#1
Newbie
Thread Starter
Sliding forward in saddle
Hello,
I got a used bike a couple months ago and am still trying to adjust it to fit just right. It's the proper frame size for me (56 cm top tube and I'm 5'10") but it's an old mountain bike frame converted into a touring set up so I imagine the geometry is different (for example it has a shorter seat post and standover height than a 56 cm road bike). I feel like I'm sliding forward in my seat a bit and can't figure out why. I have it maybe 90% of the way back on the rails to work for the KOPS method of saddle fore/aft and have the seat level. I'm wondering if maybe the shape of the seat has something to do with it as it is not flat. Any ideas? I'm really considering just going for a bike fit but I'm so close to getting it right and I mainly commute and maybe every week or two do a 20 km ride.
I got a used bike a couple months ago and am still trying to adjust it to fit just right. It's the proper frame size for me (56 cm top tube and I'm 5'10") but it's an old mountain bike frame converted into a touring set up so I imagine the geometry is different (for example it has a shorter seat post and standover height than a 56 cm road bike). I feel like I'm sliding forward in my seat a bit and can't figure out why. I have it maybe 90% of the way back on the rails to work for the KOPS method of saddle fore/aft and have the seat level. I'm wondering if maybe the shape of the seat has something to do with it as it is not flat. Any ideas? I'm really considering just going for a bike fit but I'm so close to getting it right and I mainly commute and maybe every week or two do a 20 km ride.
#2
Senior Member
Join Date: Jul 2018
Location: USA
Posts: 2,192
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times
in
349 Posts
KOPS is a starting point not the end state. Your riding style, flexibility and center of gravity all determine optimal seat fore/aft position. Your riding style may be telling you your seat should go forward, it could also be the reach is too long for you, etc. Impossible to diagnose without you getting fit.
#3
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,501
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3873 Post(s)
Liked 1,920 Times
in
1,369 Posts
If that post isn't infinitely adjustable, i.e. a 2-bolt adjustment, getting a post which is might be a good start. Very small saddle tilt adjustments make a big difference. Looks like a post with more set-back would be a good idea, too. Velo Orange makes some, others also. Issue might be that you'll need a longer than usual post.
Do your hands feel light on the bars?
Do your hands feel light on the bars?
__________________
Results matter
Results matter
#4
Newbie
Thread Starter
If that post isn't infinitely adjustable, i.e. a 2-bolt adjustment, getting a post which is might be a good start. Very small saddle tilt adjustments make a big difference. Looks like a post with more set-back would be a good idea, too. Velo Orange makes some, others also. Issue might be that you'll need a longer than usual post.
Do your hands feel light on the bars?
Do your hands feel light on the bars?
#5
Senior Member
Join Date: May 2010
Location: Bristol, R. I.
Posts: 4,340
Bikes: Specialized Secteur, old Peugeot
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 496 Times
in
299 Posts
If you are sliding forward, and as it appears, your saddle is level. it may be a bit further forward is where you need to be. Since it does not cost anything to slide the saddle forward, go ahead and try a cm adjustment. Mark the rails somehow so that if the change does not work out, you can get back to the old position.
#6
Sophomore Member
Join Date: Jan 2019
Posts: 2,690
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,057 Times
in
631 Posts
What I would do (YMMV) is tilt the saddle back ever so slightly, so that your hips are firmly planted on the seat and not sliding forward constantly. I think having them anchored is important. Might make riding in the drops less than ideal, but it's what i would do, FWIW.
Also, I have done a couple MTB to drop bar conversions, and found it impossible to get comfortable on them. Thought it would be a cinch, but it was anything but, and finally gave up.
Also, I have done a couple MTB to drop bar conversions, and found it impossible to get comfortable on them. Thought it would be a cinch, but it was anything but, and finally gave up.
#7
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,501
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3873 Post(s)
Liked 1,920 Times
in
1,369 Posts
You could simply switch to a flat saddle with a similar size and shape.
__________________
Results matter
Results matter
#8
Senior Member
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,253 Times
in
724 Posts
Check seat height too. Your seat may be a bit too high. Excessive reach may also be a factor, you may want to try a shorter stem.
For seat height, try this method: https://www.stevehoggbikefitting.com...ard-can-it-be/ There is also information on setting seat setback on his site that you may want to look at.
For seat height, try this method: https://www.stevehoggbikefitting.com...ard-can-it-be/ There is also information on setting seat setback on his site that you may want to look at.