1969 Gitane Gran Sport Resto - mod rebuild
#1
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
1969 Gitane Gran Sport Resto - mod rebuild
Picked up this Gitane a while ago at a thrift store and with help from members here on the C&V board dated it as a 1969 Gitane Gran Sport. I took it for a country ride and it fits very well so, as a keeper, I considered what to do to it as a project. Born just at the start of the bike boom era, with little value as a classic the components are in remarkably good condition. However, the derailer is a plain jane Simplex and the freewheel skipped because of poor chain lines, and the plastic shift levers (while currently good) would probably break one day. So I decided to scrap the drive train altogether and make a single speed French Rambler, with a nod to the Clubman ethos.
The stem has already been adjusted and has no cracks in it btw.
Anyone who's ever broken a bike down to rebuild appreciates when they fall apart easily and this French beauty did not disappoint! Almost everything came apart easily.
Usually removing a 50 year old freewheel from a rim means destroying it (the freewheel) in the process but with just a bit of convincing this one came off intact. After that I cleaned and re greased the hub and put on the single speed cog. Same treatment for the front. I had a very good condition Huret dork disc so I replaced the generic one with it.
Even the bottom bracket spun off with just a twist of the wrench but it had not seen service in a while with crusted old dirty grease. I cleaned and repacked it.
I plan to swap out the bars as the originals are too narrow for me. Through a magical process I put a little flair in the wider replacements, dirt drop style.
And now I wait for my Newbaum's cotton tape to arrive from amazon. I also picked up some tape to do something with... Maybe dress up these fenders.
The stem has already been adjusted and has no cracks in it btw.
Anyone who's ever broken a bike down to rebuild appreciates when they fall apart easily and this French beauty did not disappoint! Almost everything came apart easily.
Usually removing a 50 year old freewheel from a rim means destroying it (the freewheel) in the process but with just a bit of convincing this one came off intact. After that I cleaned and re greased the hub and put on the single speed cog. Same treatment for the front. I had a very good condition Huret dork disc so I replaced the generic one with it.
Even the bottom bracket spun off with just a twist of the wrench but it had not seen service in a while with crusted old dirty grease. I cleaned and repacked it.
I plan to swap out the bars as the originals are too narrow for me. Through a magical process I put a little flair in the wider replacements, dirt drop style.
And now I wait for my Newbaum's cotton tape to arrive from amazon. I also picked up some tape to do something with... Maybe dress up these fenders.
Last edited by Happy Feet; 09-22-19 at 08:27 PM.
#3
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
Nice bike! I do like the look of that chainset. Looks very useful. 50/36?
#4
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,127
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3359 Post(s)
Liked 3,638 Times
in
1,244 Posts
Very very cool!
Putting a dork disk on a singlespeed is a cheeky move
Putting a dork disk on a singlespeed is a cheeky move
Likes For abshipp:
#5
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
Effronté!
Stymied by the postman it would seem.
I ordered four rolls of Newbaums bar tape (two of blue, two of white) to try my hand at Harlequin wrapping and the package finally arrived yesterday. I was so happy! Inside were three of the four rolls One blue still on back order they say so I put off that idea and washed the frame instead with Dawn dish soap in anticipation of top coating it with boiled linseed oil as a preservative. Before that though, I set about doing something about those fenders.
These aluminum fenders are solid and I want to keep them but they are a bit drab
So while washing the frame I scrubbed them with steel wool to take the oxidation off
But they still need something. So I put a pin stripe of white tape down the center depression
And dressed the ends with French national colours for a little joie de vivre
Stymied by the postman it would seem.
I ordered four rolls of Newbaums bar tape (two of blue, two of white) to try my hand at Harlequin wrapping and the package finally arrived yesterday. I was so happy! Inside were three of the four rolls One blue still on back order they say so I put off that idea and washed the frame instead with Dawn dish soap in anticipation of top coating it with boiled linseed oil as a preservative. Before that though, I set about doing something about those fenders.
These aluminum fenders are solid and I want to keep them but they are a bit drab
So while washing the frame I scrubbed them with steel wool to take the oxidation off
But they still need something. So I put a pin stripe of white tape down the center depression
And dressed the ends with French national colours for a little joie de vivre
Likes For Happy Feet:
#6
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
Gitane Gran Sport
Worked on hundreds of those bikes BITD.
The BB spindle is toast, the cups probably too.
1 x 9 is the new fixie fad!
Also, I HATE FENDERS! Have since about 1951 or 52 on my 1st bike, a Rollfast like this one:
They shake, they rattle, they come loose, what's to like? My dad got mad at me because I took them off!
I tried some Bluemels back in the 70's. Nothing changed. After one or two rides they were gone!
I'd rather get wet and have a streak of honor up my back than put up with fenders!
verktyg
The BB spindle is toast, the cups probably too.
1 x 9 is the new fixie fad!
Also, I HATE FENDERS! Have since about 1951 or 52 on my 1st bike, a Rollfast like this one:
They shake, they rattle, they come loose, what's to like? My dad got mad at me because I took them off!
I tried some Bluemels back in the 70's. Nothing changed. After one or two rides they were gone!
I'd rather get wet and have a streak of honor up my back than put up with fenders!
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Last edited by verktyg; 09-26-19 at 11:44 PM.
#7
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Worked on hundreds of those bikes BITD.
The BB spindle is toast, the cups probably too.
1 x 9 is the new fixie fad!
Also, I HATE FENDERS! Have since about 1951 or 52 on my 1st bike, a Rollfast like this one:
They shake, they rattle, they come loose, what's to like? My dad got mad at me because I took them off!
I tried some Bluemels back in the 70's. Nothing changed. After one or two rides they were gone!
I'd rather get wet and have a streak of honor up my back than put up with fenders!
verktyg
The BB spindle is toast, the cups probably too.
1 x 9 is the new fixie fad!
Also, I HATE FENDERS! Have since about 1951 or 52 on my 1st bike, a Rollfast like this one:
They shake, they rattle, they come loose, what's to like? My dad got mad at me because I took them off!
I tried some Bluemels back in the 70's. Nothing changed. After one or two rides they were gone!
I'd rather get wet and have a streak of honor up my back than put up with fenders!
verktyg
#8
Senior Member
Join Date: Nov 2018
Location: East Tennessee
Posts: 251
Bikes: 2002 Trek 800 Singletrack, 1982 Bridgestone Spica
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 57 Post(s)
Liked 41 Times
in
32 Posts
Finally, something from Huret which actually does it's job. A Huret Dork Disc (Disque de Dorque).
#9
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
Tool for adjusting fenders
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
#10
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
Almost from the moment I bought it though I knew I would pinstripe them somehow. Still trimming the flag detail a bit.
My blue bar tape is still on back order with no delivery date (frustrating) so its time to top coat the frame instead.
#11
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,265
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,338 Times
in
2,178 Posts
-----
Make sure to find one which will not react with existing finish to create yellowing.
If unsure, test sample in unobtrusive spot...
-----
Make sure to find one which will not react with existing finish to create yellowing.
If unsure, test sample in unobtrusive spot...
-----
Likes For juvela:
#12
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
I have used boiled linseed oil before with good results.
After a great ride I came home to some sunshine so I hung the frame and treated it to a top coat of BLO. Pretty anti climactic but it's the last step before reassembly and wrapping the bars (when the errant roll arrives). I still have to rub a little mink oil into the leather saddle I'm adding and after that it's new cables and brake pads and a country ramble test ride.
After a great ride I came home to some sunshine so I hung the frame and treated it to a top coat of BLO. Pretty anti climactic but it's the last step before reassembly and wrapping the bars (when the errant roll arrives). I still have to rub a little mink oil into the leather saddle I'm adding and after that it's new cables and brake pads and a country ramble test ride.
Likes For Happy Feet:
#13
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,265
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,338 Times
in
2,178 Posts
-----
Boiled linseed oil is an interesting idea for paint finishes.
Have always thought of it as a dressing for things like the heavily weathered wooden handles of garden tools.
When it dries/cures on a painted surface what are you left with?
Thanks for the idea.
Looking forward to seeing everything back together - um, well not everything I guess, given your build plan!
The venerable Freres Huret spoke disc Nr. 996 and 998 -
-----
Boiled linseed oil is an interesting idea for paint finishes.
Have always thought of it as a dressing for things like the heavily weathered wooden handles of garden tools.
When it dries/cures on a painted surface what are you left with?
Thanks for the idea.
Looking forward to seeing everything back together - um, well not everything I guess, given your build plan!
The venerable Freres Huret spoke disc Nr. 996 and 998 -
-----
Last edited by juvela; 09-28-19 at 09:35 PM.
#14
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
-----
Boiled linseed oil is an interesting idea for paint finishes.
Have always thought of it as a dressing for things like the heavily weathered wooden handles of garden tools.
When it dries/cures on a painted surface what are you left with?
Thanks for the idea.
Looking forward to seeing everything back together - um, well not everything I guess, given your build plan!
-----
Boiled linseed oil is an interesting idea for paint finishes.
Have always thought of it as a dressing for things like the heavily weathered wooden handles of garden tools.
When it dries/cures on a painted surface what are you left with?
Thanks for the idea.
Looking forward to seeing everything back together - um, well not everything I guess, given your build plan!
-----
Over the last few years I've been working on a natural products selection for restoring bikes that involves mink oil for seats, French shellac for bar tape, gun blue acid on bare metal as a colorant instead of paint and BLO as a top coat. I used to use lacquer but found it too fragile and easy to scratch. Sort of how I approach builds now more or less. In this case the paint was good and I just want to keep it as is.
One of my winter projects will be refinishing my Apollo fixed gear and that will be a from the bare metal up process using those products.
The colour on this bike is gun blue acid, not paint. But I top coated it with epoxy at the time as I hadn't learned about linseed oil yet.
This frame also is blued (except the graphics) but top coated with lacquer.
and another blued but epoxy topcoated
Last edited by Happy Feet; 09-28-19 at 09:41 PM.
Likes For Happy Feet:
#15
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
-----
Boiled linseed oil is an interesting idea for paint finishes.
Have always thought of it as a dressing for things like the heavily weathered wooden handles of garden tools.
When it dries/cures on a painted surface what are you left with?
Thanks for the idea.
Looking forward to seeing everything back together - um, well not everything I guess, given your build plan!
The venerable Freres Huret spoke disc Nr. 996 and 998 -
-----
Boiled linseed oil is an interesting idea for paint finishes.
Have always thought of it as a dressing for things like the heavily weathered wooden handles of garden tools.
When it dries/cures on a painted surface what are you left with?
Thanks for the idea.
Looking forward to seeing everything back together - um, well not everything I guess, given your build plan!
The venerable Freres Huret spoke disc Nr. 996 and 998 -
-----
#16
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,265
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,338 Times
in
2,178 Posts
-----
Do you filter the water for the washing machine or is that for the utility sink only?
Curious to see the "Atlantic" marque.
Cesare Rizzato had an economy marque called "Atlantica" that he used to let dealers of Atala and Lygie bicycles have an economy model to compete with the chain stores...
AFAIK we have never had one come up here on the forum.
-----
Do you filter the water for the washing machine or is that for the utility sink only?
Curious to see the "Atlantic" marque.
Cesare Rizzato had an economy marque called "Atlantica" that he used to let dealers of Atala and Lygie bicycles have an economy model to compete with the chain stores...
AFAIK we have never had one come up here on the forum.
-----
Likes For juvela:
#17
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
The filter is for a salt water aquarium.
The Atlantic wasn't all that exotic. It was actually a department store "Woodwards" brand model. What was fun was learning about the Resilion kick back 2 speed hub it has. I kept the original paint on the lugs and parts where the graphics were.
Before
After
The Atlantic wasn't all that exotic. It was actually a department store "Woodwards" brand model. What was fun was learning about the Resilion kick back 2 speed hub it has. I kept the original paint on the lugs and parts where the graphics were.
Before
After
Last edited by Happy Feet; 09-29-19 at 12:44 AM.
#18
Senior Member
Join Date: Dec 2005
Location: Ashland, VA
Posts: 4,420
Bikes: The keepers: 1958 Raleigh Lenton Grand Prix, 1968 Ranger, 1969 Magneet Sprint, 1971 Gitane Tour de France, 1973 Raleigh Tourist, 3 - 1986 Rossins, and a '77 PX-10 frame in process.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 237 Times
in
129 Posts
Also, I HATE FENDERS! Have since about 1951 or 52 on my 1st bike, a Rollfast like this one:
They shake, they rattle, they come loose, what's to like? My dad got mad at me because I took them off!
I tried some Bluemels back in the 70's. Nothing changed. After one or two rides they were gone!
I'd rather get wet and have a streak of honor up my back than put up with fenders!
verktyg
I've got a feeling mine might be just a bit older because it's got a couple of curved bits of bar stock fancying up the front fork going from the base of the head tube to the axle. Sorta makes it look like a springer fork on a motorcycle, although they're rigid. And the fender has a big, clunky headlight mounted on the leading edge of the fender.
__________________
Syke
“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”
H.L. Mencken, (1926)
Syke
“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”
H.L. Mencken, (1926)
#19
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
Early 50's Rollfast
My apologies on hijacking the subject, but thank you for that picture. I'm currently working on a girl's model of either the same bike, or one that damned close to it. The front fender is completely a mass of rust, and I wasn't sure if the trailing edge is supposed to be like that, or it had just gotten abused into that shape, but you've just provided me with some answers.
I've got a feeling mine might be just a bit older because it's got a couple of curved bits of bar stock fancying up the front fork going from the base of the head tube to the axle. Sorta makes it look like a springer fork on a motorcycle, although they're rigid. And the fender has a big, clunky headlight mounted on the leading edge of the fender.
I've got a feeling mine might be just a bit older because it's got a couple of curved bits of bar stock fancying up the front fork going from the base of the head tube to the axle. Sorta makes it look like a springer fork on a motorcycle, although they're rigid. And the fender has a big, clunky headlight mounted on the leading edge of the fender.
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
#20
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Effronté!
Stymied by the postman it would seem.
I ordered four rolls of Newbaums bar tape (two of blue, two of white) to try my hand at Harlequin wrapping and the package finally arrived yesterday. I was so happy! Inside were three of the four rolls One blue still on back order they say so I put off that idea and washed the frame instead with Dawn dish soap in anticipation of top coating it with boiled linseed oil as a preservative. Before that though, I set about doing something about those fenders.
These aluminum fenders are solid and I want to keep them but they are a bit drab
So while washing the frame I scrubbed them with steel wool to take the oxidation off
But they still need something. So I put a pin stripe of white tape down the center depression
And dressed the ends with French national colours for a little joie de vivre
Stymied by the postman it would seem.
I ordered four rolls of Newbaums bar tape (two of blue, two of white) to try my hand at Harlequin wrapping and the package finally arrived yesterday. I was so happy! Inside were three of the four rolls One blue still on back order they say so I put off that idea and washed the frame instead with Dawn dish soap in anticipation of top coating it with boiled linseed oil as a preservative. Before that though, I set about doing something about those fenders.
These aluminum fenders are solid and I want to keep them but they are a bit drab
So while washing the frame I scrubbed them with steel wool to take the oxidation off
But they still need something. So I put a pin stripe of white tape down the center depression
And dressed the ends with French national colours for a little joie de vivre
#21
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,265
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3811 Post(s)
Liked 3,338 Times
in
2,178 Posts
-----
Thanks very much for the response.
Have you been able to date the Atlantic?
I tend to think of Resilion products as ending somewhere around 1960.
Does the hub exhibit a date mark?
Have you been able to research the actual manufacturer of the bicycle? Wondering of CA or UK.
Hydration station appears achieved with pop-rivet type fasteners.
"Salt water aquarium" - I are a fellow aquarist.
-----
Thanks very much for the response.
Have you been able to date the Atlantic?
I tend to think of Resilion products as ending somewhere around 1960.
Does the hub exhibit a date mark?
Have you been able to research the actual manufacturer of the bicycle? Wondering of CA or UK.
Hydration station appears achieved with pop-rivet type fasteners.
"Salt water aquarium" - I are a fellow aquarist.
-----
#22
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
-----
Thanks very much for the response.
Have you been able to date the Atlantic?
I tend to think of Resilion products as ending somewhere around 1960.
Does the hub exhibit a date mark?
Have you been able to research the actual manufacturer of the bicycle? Wondering of CA or UK.
Hydration station appears achieved with pop-rivet type fasteners.
"Salt water aquarium" - I are a fellow aquarist.
-----
Thanks very much for the response.
Have you been able to date the Atlantic?
I tend to think of Resilion products as ending somewhere around 1960.
Does the hub exhibit a date mark?
Have you been able to research the actual manufacturer of the bicycle? Wondering of CA or UK.
Hydration station appears achieved with pop-rivet type fasteners.
"Salt water aquarium" - I are a fellow aquarist.
-----
Before my current career I was self employed as an Aquarium installer and maintainer; sort of a niche business and expensive hobby number 2 out of 5 (climbing, aquariums, diving, photography/videography, cycling). So far biking has been the relatively cheapest
A couple of my previous tanks. My current tank is planted using the Walstad method and still under development:
#23
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
After a bit of a delay I finally received my wayward roll of blue Newbaums Tape from Amazon this week so the bar fight was on! And I'm not kidding...
My goal was to try my hand at harlequin wrapping.. I'm mean, how hard could it be? I watched this video for inspiration
and set myself up for a relaxing morning enjoying my hobby. Some herbal tea.. a little mood music...
I marked the position I wanted the brakes to be in and cleaned the bars so the tape would stick.
Things began well enough. I marked the initial spacing with the Newbaums labels and started wrapping but made a false start when I realized the diamond pattern needed to begin sooner on the flats to fit the spacing. Oh well, one glitch wouldn't be so bad...
I found out that by adding some twist ties to the rolls they would not unspool so bad.
and added and wrapped the brake attachments in place.
This all took a lot of time as I wrapped and re wrapped and re wrapped numerous times trying to get the diamonds somewhat lined up.
I'd planned to shoot a step by step tutorial but that went out the window pretty early on as I became embroiled in vicious hand to hand combat. The bends of the bar made the trajectory of the tape go out of whack and then lining up the passes became more complicated.
Then I made my big mistake! I decided to take a break for lunch with one lower grip to go and when I resumed had somehow forgotten the whole layering process. Even when I watched the video to review I couldn't make the tape do what it was supposed to do. This shot mirrors my mental confusion.
Eventually I figured it out and finished the job. There were casualties.
Now I have to hunt down some clear shellac as all I have is amber flavoured French shellac which will ruin the look of the white tape. However, having just narrowly escaped with my sanity intact I decided to go for a ride today first before entering the ring again to put the finishing touches on the build.
My goal was to try my hand at harlequin wrapping.. I'm mean, how hard could it be? I watched this video for inspiration
I marked the position I wanted the brakes to be in and cleaned the bars so the tape would stick.
Things began well enough. I marked the initial spacing with the Newbaums labels and started wrapping but made a false start when I realized the diamond pattern needed to begin sooner on the flats to fit the spacing. Oh well, one glitch wouldn't be so bad...
I found out that by adding some twist ties to the rolls they would not unspool so bad.
and added and wrapped the brake attachments in place.
This all took a lot of time as I wrapped and re wrapped and re wrapped numerous times trying to get the diamonds somewhat lined up.
I'd planned to shoot a step by step tutorial but that went out the window pretty early on as I became embroiled in vicious hand to hand combat. The bends of the bar made the trajectory of the tape go out of whack and then lining up the passes became more complicated.
Then I made my big mistake! I decided to take a break for lunch with one lower grip to go and when I resumed had somehow forgotten the whole layering process. Even when I watched the video to review I couldn't make the tape do what it was supposed to do. This shot mirrors my mental confusion.
Eventually I figured it out and finished the job. There were casualties.
Now I have to hunt down some clear shellac as all I have is amber flavoured French shellac which will ruin the look of the white tape. However, having just narrowly escaped with my sanity intact I decided to go for a ride today first before entering the ring again to put the finishing touches on the build.
Last edited by Happy Feet; 10-20-19 at 08:29 PM.
#24
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
Put the finishing touches on the bike... for now.
My initial vision for this build was a day rambler for the French countryside. I'm pretty bored with stock bike boom 10 speed rebuilds but the paint and graphics were good enough that I didn't want to mess with them. Still need to shellac the cotton tape, when I find clear shellac, and I wound up taking off the French colours tape on the leading edge of the front fender in favour of "less is more" and just left the tape where the mud flaps would go. In the future I will try my hand at resurfacing the vinyl seat with leather and adding a wicker creel to the front with a hole in the lid for the wine bottle to stick out of.
My initial vision for this build was a day rambler for the French countryside. I'm pretty bored with stock bike boom 10 speed rebuilds but the paint and graphics were good enough that I didn't want to mess with them. Still need to shellac the cotton tape, when I find clear shellac, and I wound up taking off the French colours tape on the leading edge of the front fender in favour of "less is more" and just left the tape where the mud flaps would go. In the future I will try my hand at resurfacing the vinyl seat with leather and adding a wicker creel to the front with a hole in the lid for the wine bottle to stick out of.
Likes For Happy Feet:
#25
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts