Weird Danish Bike
Likes For VtwinVince:
#2
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,107
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,018 Times
in
664 Posts
It doesn't look so weird, in fact, I like the way it looks. Perhaps it is more of a touring bike with the longer wheelbase. The seat post is extended quite a bit so perhaps a larger frame would work better for you or whoever is riding it. I don't know anything about the bike though. Nice looking steel cottered crankset. Two eyelets on the rear dropout also is an indication of a touring bike. It looks like a Simplex rear derailleur. A nice arc on the fork makes me think 70's as well.
Perhaps non-fixie might know something. He is expert on C& V bike brands and especially the European makers and brands.
Nice carpet by the way. With a carpet like that in your workshop you are motivated to keep it tidy. Or perhaps you are tidy and therefore a nice carpet would go just fine.
More pictures of the headbadge and the graphics on the seat tube might help as well.
One other thought that I have from my time spent here on BikeForums is that this S.C.?. might be a bike shop that had these bikes private labeled for them.
Perhaps non-fixie might know something. He is expert on C& V bike brands and especially the European makers and brands.
Nice carpet by the way. With a carpet like that in your workshop you are motivated to keep it tidy. Or perhaps you are tidy and therefore a nice carpet would go just fine.
More pictures of the headbadge and the graphics on the seat tube might help as well.
One other thought that I have from my time spent here on BikeForums is that this S.C.?. might be a bike shop that had these bikes private labeled for them.
Likes For Velo Mule:
#3
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,181
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1562 Post(s)
Liked 1,285 Times
in
856 Posts
A surprising number of bikes from that era were patterned after the highly successful Schwinn Varsity.
BDS bikes from Sweden even looked like the Varsity with 1" frame tubing, slack frame angles and one-piece cranks!
Vista from Japan made a similar Varsity clone, and there were many other lower-end Japanese bikes made having identical slack geometry but also having lugged or faux-lugged or semi-lugged frames.
Low-end bikes from European countries approached the Schwinn's 70-degree frame angles but usually just a bit steeper. They were competing for the same buyers in the US "boom" market.
Huffies and Murrays also had identical frame geometry and tubing diameter as the Varsity, but usually having tubular forks like the Schwinn Continental since they didn't want to spend the money for a forged fork.
The pictured bike appears to meld the seat tube angle of the Varsity with the substance of the UO8.
BDS bikes from Sweden even looked like the Varsity with 1" frame tubing, slack frame angles and one-piece cranks!
Vista from Japan made a similar Varsity clone, and there were many other lower-end Japanese bikes made having identical slack geometry but also having lugged or faux-lugged or semi-lugged frames.
Low-end bikes from European countries approached the Schwinn's 70-degree frame angles but usually just a bit steeper. They were competing for the same buyers in the US "boom" market.
Huffies and Murrays also had identical frame geometry and tubing diameter as the Varsity, but usually having tubular forks like the Schwinn Continental since they didn't want to spend the money for a forged fork.
The pictured bike appears to meld the seat tube angle of the Varsity with the substance of the UO8.
#4
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,748
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 671 Times
in
419 Posts
It would be nice to see some detail shots of the lugs, fork crown and dropouts
#5
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,512
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 789 Post(s)
Liked 1,739 Times
in
630 Posts
Doesn't seem odd to me near match to a Juenet 640 or Leujune 600 so a very nice mid level 70's French bike nothing odd to me.
#6
Member
#7
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,000
Bikes: Yes, please.
Mentioned: 279 Post(s)
Tagged: 0 Thread(s)
Quoted: 2193 Post(s)
Liked 4,585 Times
in
1,764 Posts
Thank you, @FlemmingM!
To at least have something to contribute, here's a pic I found on the webs of a similar, if not the same bike. The fully-housed shifter cables are an original feature, apparently:
To at least have something to contribute, here's a pic I found on the webs of a similar, if not the same bike. The fully-housed shifter cables are an original feature, apparently:
Likes For non-fixie:
#8
Member
Thank you, @FlemmingM!
To at least have something to contribute, here's a pic I found on the webs of a similar, if not the same bike. The fully-housed shifter cables are an original feature, apparently:
To at least have something to contribute, here's a pic I found on the webs of a similar, if not the same bike. The fully-housed shifter cables are an original feature, apparently:
Actually if you look closely on the OP's photo you can see at least traces of the top tube text ' Verdensmestercyklen', which is danish and translate to 'the World Champion bike'. So this would make the bike younger than 1974.
Their full race models, which at this time were built in Reynolds 531, did not have eyelets for mudguards/racks.
#9
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
SCO had a serial number format that started with 'S" or 'SS' and an alpha character suffix that will identify the year.
#10
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,244
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3803 Post(s)
Liked 3,324 Times
in
2,170 Posts
A surprising number of bikes from that era were patterned after the highly successful Schwinn Varsity.
BDS bikes from Sweden even looked like the Varsity with 1" frame tubing, slack frame angles and one-piece cranks!
Vista from Japan made a similar Varsity clone, and there were many other lower-end Japanese bikes made having identical slack geometry but also having lugged or faux-lugged or semi-lugged frames.
Low-end bikes from European countries approached the Schwinn's 70-degree frame angles but usually just a bit steeper. They were competing for the same buyers in the US "boom" market.
Huffies and Murrays also had identical frame geometry and tubing diameter as the Varsity, but usually having tubular forks like the Schwinn Continental since they didn't want to spend the money for a forged fork.
The pictured bike appears to meld the seat tube angle of the Varsity with the substance of the UO8.
BDS bikes from Sweden even looked like the Varsity with 1" frame tubing, slack frame angles and one-piece cranks!
Vista from Japan made a similar Varsity clone, and there were many other lower-end Japanese bikes made having identical slack geometry but also having lugged or faux-lugged or semi-lugged frames.
Low-end bikes from European countries approached the Schwinn's 70-degree frame angles but usually just a bit steeper. They were competing for the same buyers in the US "boom" market.
Huffies and Murrays also had identical frame geometry and tubing diameter as the Varsity, but usually having tubular forks like the Schwinn Continental since they didn't want to spend the money for a forged fork.
The pictured bike appears to meld the seat tube angle of the Varsity with the substance of the UO8.
Perhaps you are thinking of the DBS cycles (Jonas Oeglaend) from Sandnes Norway.
-----
#11
Ride, Wrench, Swap, Race
Join Date: Jan 2010
Location: Northern California
Posts: 9,181
Bikes: Cheltenham-Pedersen racer, Boulder F/S Paris-Roubaix, Varsity racer, '52 Christophe, '62 Continental, '92 Merckx, '75 Limongi, '76 Presto, '72 Gitane SC, '71 Schwinn SS, etc.
Mentioned: 132 Post(s)
Tagged: 0 Thread(s)
Quoted: 1562 Post(s)
Liked 1,285 Times
in
856 Posts
Likes For dddd:
#12
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,244
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3803 Post(s)
Liked 3,324 Times
in
2,170 Posts
-----
frame bits -
head lugs are BOCAMA 20's series feature cut
there are three 20's series patterns, one would need a front view to determine which of them were employed
head lug nozzle cut is BOCAMA /I
seat lug is BOCAMA pattern H
dropouts are NERVEX nr. 1036 G
shell not shown well enough for an ID
track style fork crown may be one of the Georg Fischer patterns, just a thought...
-----
frame bits -
head lugs are BOCAMA 20's series feature cut
there are three 20's series patterns, one would need a front view to determine which of them were employed
head lug nozzle cut is BOCAMA /I
seat lug is BOCAMA pattern H
dropouts are NERVEX nr. 1036 G
shell not shown well enough for an ID
track style fork crown may be one of the Georg Fischer patterns, just a thought...
-----
#13
Newbie
Join Date: Jun 2021
Posts: 1
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
1 Post
I am the happy owner of a S.C.O. "Verdensmestercyklen" Model Professionel from 1969. It has double butted Reynolds 531 tubes all over, Nervex "muffer" (don't know the English word) and it weighs app. 10 kilo's. The bike has som stylistic elements dating back to the 50'es and before, and it's excactly the same model that Jørgen Schmidt rode, when he won the amateures world championship road race in Leicester 1970. The term "Verdensmestercyklen" actually derives from the marque Harthiner that S.C.O. bought around 1960. Harthiner had won the WC in 1921, 1931 and last 1949, and they were happy to state that on every bicycle the sold, stretching from sporty everyday bikes to plane racers. S.C.O. took over the bold definition "Verdensmestercyklen". And the the racing cycle program that S.C.O. had in the 1960'es and beyond were originally almost entirely taken over from the Harthiner bikes. But as the S.C.O. cycles also won world championships, they sort of earned the title by their own merits. :-)
Likes For Seegert:
#14
Junior Member
Join Date: Aug 2019
Location: Copenhagen, Denmark
Posts: 77
Bikes: 1991 Centurion Oxygen, 1997 Centurion Invincible, 1995+- Fondriest Wind, 1982 Grand Master Nissan Pro 2000, 1992 Olmo Racing (The racing part of the name HAS to be a joke).
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 30 Times
in
20 Posts
The English word for muffer is lugs.
#15
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,326
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3897 Post(s)
Liked 4,825 Times
in
2,228 Posts
Welcome @Seegert .
Your SCO sounds like the type of bicycle we would love to see. .
The forum's rules pose some limitations to reduce Spam.
Post some pics in the Gallery.
Your SCO sounds like the type of bicycle we would love to see. .
The forum's rules pose some limitations to reduce Spam.
Post some pics in the Gallery.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.