Nuvinci/enviolo igh problems and questions
09-16-19, 06:29 PM
#1
Newbie
Thread Starter
Join Date: Sep 2019
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nuvinci/enviolo igh problems and questions
I have two nuvinci problems and I am wondering if anyone has some ideas.
1. Nuvinci n380 with gates. I get full range on the hub, but the info graphic goes from steep hill to moderate hill only. It doesnt go flat. No biggie really, just curious.
2. Nuvinci n360 with gates on pegasus premio nu. The grip shifter has significantly more resistance than my n380. It's harder to turn and dial in the perfect cadence. Cable tension is set right with full range of shifting.
Any ideas?
1. Nuvinci n380 with gates. I get full range on the hub, but the info graphic goes from steep hill to moderate hill only. It doesnt go flat. No biggie really, just curious.
2. Nuvinci n360 with gates on pegasus premio nu. The grip shifter has significantly more resistance than my n380. It's harder to turn and dial in the perfect cadence. Cable tension is set right with full range of shifting.
Any ideas?
09-18-19, 09:47 PM
#2
Senior Member
You might want to ask this question in the Bicycle Mechanics subforum.
For the first bike it must be a matter of syncing the lowest or highest gear on the hub with the shifter.
For the second bike probably some oiling of the shifter internals might help.
Park Tools has some videos on Youtube showing the installation of the Nuvinci hub and shifter. Didn't look too complicated. But check with BM first.
For the first bike it must be a matter of syncing the lowest or highest gear on the hub with the shifter.
For the second bike probably some oiling of the shifter internals might help.
Park Tools has some videos on Youtube showing the installation of the Nuvinci hub and shifter. Didn't look too complicated. But check with BM first.
