Old Henry James Frame fixture manual?
#1
Newbie
Thread Starter
Join Date: Dec 2017
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Old Henry James Frame fixture manual?
Hello All,
New to Bike Forums and seeking help. I recently purchased a complete Henry James frame and fork jig (for lugged frames), from the early 1990s. The only thing missing is the instruction manual. I would be happy to compensate anybody that could make a copy of theirs for this particular jig. Likewise, I'd be very appreciative if someone could point me in a direction where I could likely come upon one.
Thank you,
Lefty
New to Bike Forums and seeking help. I recently purchased a complete Henry James frame and fork jig (for lugged frames), from the early 1990s. The only thing missing is the instruction manual. I would be happy to compensate anybody that could make a copy of theirs for this particular jig. Likewise, I'd be very appreciative if someone could point me in a direction where I could likely come upon one.
Thank you,
Lefty
Last edited by Lefty Turner; 04-29-19 at 10:45 AM.
#2
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
you could ask Henry James, there is a link in the suppliers thread
#3
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
Lefty I have a few manuals. Does your have the Universal Tube Supports or the older Clamp Blocks? Andy
__________________
AndrewRStewart
AndrewRStewart
#4
Newbie
Thread Starter
Join Date: Dec 2017
Posts: 4
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Andrew,
The "clamp blocks" are 1" thick aluminum with 4 different half-circle radius cutouts on each of the 4 sides. There is one v-notch top clamp piece held with 2 alan screws for each of the four sided clamp blocks. I am describing them as i do not know if that could also be termed a universal tube support. Intuition says they are the older clamp blocks you are referring to.
Thank you,
Lefty
The "clamp blocks" are 1" thick aluminum with 4 different half-circle radius cutouts on each of the 4 sides. There is one v-notch top clamp piece held with 2 alan screws for each of the four sided clamp blocks. I am describing them as i do not know if that could also be termed a universal tube support. Intuition says they are the older clamp blocks you are referring to.
Thank you,
Lefty
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
Lefty- I have copied the older manual, that matches with your tube blocks and vintage. 33 pages and 6oz of mailing weight. With common first class mailing that's about $1.75 in postage. How about $5 for printing and mailing?
Here's my email: onetenth at earthlink dot net. We can take this off forum for address and payment. Andy
Here's my email: onetenth at earthlink dot net. We can take this off forum for address and payment. Andy
__________________
AndrewRStewart
AndrewRStewart