Sugino RT crankset - Drilled
#1
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
Sugino RT crankset - Drilled
Sugino "Drilled Out" RT Crankset in a 175 length with a 52/ 40 chainring.. Yes a Forty which are not too common. The BCD is 110
The Sugino RT Logo is still clearly visible and the dustcaps are included. The finish is in very good condition but there are some small wear marks on the crank that show its age and minimal use.
A Drilled out RT 175 with a 52/40 ? These dont show up very often.
$69 delivered to your door via USPS Flat rate box, as long as its in the U.S.A.
I accept PAYPAL.
The Sugino RT Logo is still clearly visible and the dustcaps are included. The finish is in very good condition but there are some small wear marks on the crank that show its age and minimal use.
A Drilled out RT 175 with a 52/40 ? These dont show up very often.
$69 delivered to your door via USPS Flat rate box, as long as its in the U.S.A.
I accept PAYPAL.
Last edited by Manny66; 10-06-20 at 08:00 PM.
#2
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
Price bump
$69 ,New Price.SHIPPED
$69 ,New Price.SHIPPED
#3
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
bump
#4
Garage tetris expert
Join Date: May 2016
Location: Texas Hill Country
Posts: 891
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 387 Post(s)
Liked 692 Times
in
329 Posts
Cool crank, but are the chainrings original to the crank? I thought they were supposed to follow the spiral, as shown here: VeloBase.com - Component: Sugino RT (double)
#5
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,801
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2437 Post(s)
Liked 3,120 Times
in
1,962 Posts
Cool crank, but are the chainrings original to the crank? I thought they were supposed to follow the spiral, as shown here: VeloBase.com - Component: Sugino RT (double)
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#6
Senior Member
Thread Starter
Join Date: Oct 2018
Location: Whittier
Posts: 872
Bikes: 1973 Colnago Super, Litespeed Classic , Automoto , Pinarello Gavia TSX,Eddy Merckx Corsa Extra,Eddy Merckx EMX-5 , 1982 Moser SL, Concorde TSX, Vitus 979 KAS. Diamant SLX,60's Meteor
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 235 Post(s)
Liked 947 Times
in
327 Posts
sold - sold _ sold
#7
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
Cool crank, but are the chainrings original to the crank? I thought they were supposed to follow the spiral, as shown here: VeloBase.com - Component: Sugino RT (double)
I wonder where a guy could find one?...
__________________
1970 Gitane TdF; 1973 Gitane TdF
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
1979 Trek 710; 1981 Trek 412; 1981 Trek 710
1984 Specialized Stumpjumper Sport; 1985 Specialized Allez SE; 1988 Specialized Sirrus; 1989 Specialized Rock Combo
1984 Ross Mt. Hood
1988 Centurion Ironman Expert
1991 Bridgestone RB-1
1992 Serotta Colorado TG
2015 Elephant NFE
#8
Garage tetris expert
Join Date: May 2016
Location: Texas Hill Country
Posts: 891
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 387 Post(s)
Liked 692 Times
in
329 Posts
I’ve never seen that spiral ring on anything besides a sugino RT, which was usually the standard crankset in sub-top tier touring models in the early 80s. Your univega gran turismo, miyata 610, trek 520 etc. The top tiers generally got a sugino AT (a.k.a. the greatest crankset ever made).
#9
tantum vehi
Join Date: Jul 2008
Location: Flathead Valley, MT
Posts: 4,440
Bikes: More than I care to admit
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 1167 Post(s)
Liked 992 Times
in
491 Posts
There was the Ofmega Mistral at the same time with the same pattern. Classic 80’s. The AT is early 80’s, but has a more timeless look to it. Not sure if I can verify that it’s the sexiest crank ever made, but it would be in my top five for sure. I have them on a few bikes with spares ready to go. I also have some Specialized “flag” cranks - made the same way (cold forged) with similar styling. But I digress.
Yes, heavy hinting about the 52t chainring being available.
Yes, heavy hinting about the 52t chainring being available.
#10
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,801
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2437 Post(s)
Liked 3,120 Times
in
1,962 Posts
Angular chainring attachment tabs always gave me the willies for some reason...never really liked them...sort of asynchronostic to me.
ofmega mistral was a beautiful piece though. I always wondered what an ofmega brakeset would have looked like...I think they only sourced Modolo if I recall correctly?
ofmega mistral was a beautiful piece though. I always wondered what an ofmega brakeset would have looked like...I think they only sourced Modolo if I recall correctly?
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super