Rocket-Sauce 

https://boston.craigslist.org/bmw/bi...155430039.html

Super Lightweight Cannondale Road Bike.All tune u..5"6 till 5"10 $325 (Natick|framingham)

Great Conditions.
Nice and clean
Lightweight frame size 19
Wheels 700x35
18 speed.
All tune up
Ready to ride.
$325
show contact info text or call.
Or email
Cash onlif this is up bike is still avaliable can show.any time

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/sob/bi...155346197.html

Trek 620 Sport Touring Bike 24" Frame for 5'-8" - 6' - 0" - $360 (Foxboro)

Rare Trek 620 Sport Touring bike. Hand made in the USA.
This model was only made three years and was one step up from their famous 520 touring bike.
This bike was well loved by it's first owner and was well maintained.
I'm the second owner and just had it tuned up, lubed and adjusted.
New brake cables installed with new Cane Creek brake hoods and new bar tape was installed.
Bike has an 18 speed drive train with a low granny gear for climbing hills.
It was designed for either short day rides or long tours and would be a rugged city bike.
Sold for cash only. Willing to meet at Mansfield or South Attleboro (Market Basket) commuter rail station.
Please text/call show contact info
I will not respond to emails due to scammers.

Rocket-Sauce 

https://boston.craigslist.org/gbs/bi...155142379.html

Benotto Road Bike, 58 cm - $550 (Cambridge)

Benotto road bike in great condition. Suitable for someone 6ft or taller.

$550 obo

Rocket-Sauce 

https://boston.craigslist.org/gbs/bi...151376972.html

Raleigh 753 painted by Bob Jackson Cycles England - $1675 (Medford)

Raleigh 753. Size 60 painted by Bob Jackson Cycles England Frame and fork hand made at Ilkeston Workshop with silver brazing & Reynolds 753 tubing throughout. Serial number is the SB, the dropouts are drilled, the fork is the proper fork.

PLEASE NOTE: Price is firm as the machine sits. HOWEVER, willing to take LESS $$ if buyer wishes to put his own crankset on it and not take the lovely TA crankset on the bike. Same thing with the handlebars; cash will subtracted from price if buyer wishes to buy his own bars, shifters and stem. With no changes bike is $1675.00 FIRM. With NO crankset, no Handlebars, barcons and stem, the price is FIRM at $1245.00

Narrower set of bars and stems and down tube shifters are are all available; also Campagnolo crankset or Stronglight are available if so desired.

Note: rear wheel has a hop in it and could use a new rim but hub is fine. Also see the cool Raleigh wheel covers included in sale!!

The tubular tires are in good condition. They will last well, are ridable but one must reglue them so that they are fresh. The ROLLS saddle in photos is very expensive and is included! Note no pedals included.

I have a practically NEW set of GP4 rims on lovely Campy Chorus hubs that I'm selling on craigslist too.

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

Cut the asking price in half, and this would be a decent buy.

https://boston.craigslist.org/gbs/bi...154900430.html

Early 90s 55cm Merckx Corsa or Corsa Extra - $2000 (Cambridge)

Early 90s 55cm Merckx Corsa (Columbus SL) or Corsa Extra (Columbus SLX). Would fit 5'10"-6'0" ~32" inseam perfectly.

Rides very well for a classic steel bike. Selling because I don't have space/want to find someone to appreciate it.

Upgrades/details:
- Campy Athena 11spd, 34/50. Chorus cassette, 12-29
- Soma HWY One 44cm bars
- San Marco Laser saddle
- 172.5mm cranks
- Dura-ace headset
- 700c Mavic Open Pro 32 laced to 2006 Veloce hubs

Few cosmetic chips/scratches in paint as you would expect for a classic bike.

Pedals and saddle bag NOT included. Cash/venmo or paypal only. Local pickup preferred am willing to discuss delivery

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

..

https://boston.craigslist.org/bmw/bi...145782537.html

Rare Bianchi Project 7 29er/Hybrid, Large - $500 (Sudbury)

Extremely rare Bianchi Project 7 29er. This was the original 29er from the 1990s. Can accommodate up to a 42mm wide tire. Size large/19.5 for riders up to 6 feet tall. 22.5" top tube, 31.5"standover height, 17.25" chainstay, 4.75"headtube. Iconic Bianchi Celeste green color. Lightweight Ritchey Logic Prestige steel tubing and steel fork. XT derailleurs with thumb shifters. Multiple hand position handlebar. It's currently set up as a hybrid, and has narrower wheels than stock. One rim is a Mavic MA2, the other is a Mavic Open Pro. Excellent condition for a bike from the 1990s.

Call or text

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/nos/bi...153306479.html

Bertoni Corsa Mondiale racing profile road bike; 5'1" to 5'5" - $350 (Winchester)

Bertoni Corsa Moniale road bike
Very lightweight and fast
Originally cost $1580.00 (adjusted for inflation)
Components are the Shimano 600 group set.
Pristine condition
Tires new in 2018
Frame is 18.5 inches; aka 47 cm suitable for a rider between 5'1" and 5'5"
12 speed drivetrain with racing cassette

Richard
978 621 9000
$350.00

Rocket-Sauce 

https://boston.craigslist.org/bmw/bi...149300687.html

Trek 520 Road Bike - $200 (Dedham)

I have a vintage Trek 520 Road bike for sale. It has a 21" frame, with a standover of approx. 31".
It is in very good shape, is ready to ride. 18 speeds, Quicklock rims, have alternate seat and alternate
pedals, if you like. Questions, feel free. $200

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/bmw/bi...153777015.html

Two 57cm Peter Mooney custom steel bikes (Stow Ma)

Two Peter Mooney Custom Steel bikes $2700 & $1500. Both are hand built custom steel, approximate size 57cm with a slightly shorter top tube than stock build. Cranks are 72 1/2 mm

Bike 1 - $2700
High end build- Shimano Dura-Ace 10 speed components with compact double crank, carbon fork, Chris King headset, High end Mavic wheels with carbon fiber spokes, Dura-Ace 7900 road pedals. The bike was built in 2011 with high end tubing with a tight geometry built for performance and used only 3 years. It is in pristine condition and looks as new.


Bike 2 - $1500
Similar geometry to Bike 1 but less focus on performance. Older bike - it was upgraded with Shimano Ultegra 10 speed components in 2014 and was then used for only 6 months. Has a compact crank, steel fork, Chris King headset and Mavic wheels. Bike is in very good shape. Components are almost new and include shifters, crank, deraileurs, bottom bracket and chain. Brake calipers are Dura-ace.

Have some extra components and accessories such as cassettes, tires, pumps, shoes, etc that are also available

1st 4 images are of bike 2, remaining images are of bike 1

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/gbs/bi...152791041.html

Colnago Master Olympic Decor 63cm - $1600 (Cambridge)

Gorgeous Colnago Master Olympic Decor, handmade in Italy, in amazing condition with very few miles. Famous Columbus Gilco crimped tubes covered in famously loud early-90s Colnago paint scheme.
I purchased it in 2010 from the original owner. He had hardly ever ridden it. The bike has never been ridden in the rain and has never spent a night outside.
The bike rides beautifully. It is very direct and responsive, and the Columbus Gilco tubes provide a ride quality of legendary suppleness. It is a dream.
There are a few small scratches from storage; the cranks show typical scuffing; there are two very small and one slightly larger paint chip on the top tube (see photos).
I am not entirely sure of the year, but it appears to be circa 1994. Perhaps someone more knowledgeable can inform me. The paint scheme is incredible; the chrome is to die for. The bike and Campagnolo groupset are simply in gorgeous condition. There are no dents, and it has never been in an accident.
Everything on the bike is original except the tires, chain, brake pads, and bar tape. This is a rare all-original example of one of Italy’s finest handmade steel bikes, as it was originally built up, and in an even more rare size. It is ready to go as a weekend-ride head-turner.
Full Campagnolo 8-speed groupset (again, I am not an expert and am unsure of exactly which Campy line; it is not Record, but one of the mid-level groups). Selle Italia saddle. 700c x 25mm Continental Grand Prix 4 season tires with plenty of miles come on the original Campagnolo wheelset. Pantographed 3TTT stem and bars in beautiful condition.
The bike had a full tuneup, with hubs repacked, in Spring 2019. My LBS has confirmed that the frame is in great shape.
The seat tube measures 63cm center to center, and the top tube is 59cm center to center.

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/gbs/bi...152608946.html

Miele Alba Road Bike - Classic Canadian Racer - $475 (Medford, MA)

-- Columbus CROMOR steel tubing (slightly heavier and stronger than SL)
-- Shimano Sport LX / Biopace drivetrain
-- Classic Shimano Sport LX Downtube Shifters
-- Shimano 105 hubs, Miele/Durex "made in Italy" rims
-- Exage sport brakes
-- Circa 1989-1990
-- 23" seat tube, 22.5" top tube
-- Stem is short for those with long legs and shorter arms. Can be swapped out for a longer stem.

*Pricing Options*
-- As is: $475
-- swap out for longer stem and re-do with fresh yellow or black bar-tape [+$35]
-- install new brake/shifter housing & cables [+$40]
-- swap out saddle with another [+$0-30]

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/bmw/bi...148471718.html

Waterford 2200 58 cm classic racer - $1350 (Arlington)

Hi, I'm selling this classic Waterford 2200 racer. I love this bike, and built it up myself, but I just don't ride it enough and need to make room for other bicycles.

FRAME:

It's a classic, lugged frame Waterford racing bike. It was custom-made but is actually a pretty standard size, and rides beautifully.

The 2200 is the custom 853/True Temper OX Plat lugged execution of the road racing geometry, which you can find here: https://waterfordbikes.com/road-race/. It's still very light at just over 20 pounds.

The frame was custom painted ten years ago at the Waterford factory, but overall the paint is very good with just a few nicks that have been retouched.

Measurements:
- 580 mm seat tube c-c
- 575 mm top tube c-c
- 20.5 pounds

BUILD:

Complete Shimano Ultegra 6800 groupset:
- chainset - 11 speed / 175mm / 34/50 / grey
- English (BSA) bottom bracket
- cassette - 11-28 / 11 speed
- chain (fairly good shape)
- center-mount calipers
- front derailleur, braze on
- rear derailleur - 11 speed / short cage SS
- STI Levers - 11 speed / black cables

Handbuilt wheels:
- 105 hubs
- Velocity Fusion rims
- DT double-butted spokes
- Continental Grand Prix 4000S II 700c road tires, 25 front, 23 back -- decent shape

Cockpit:
- Nitto Noodle 177 handlebar 26.0mm, 46 cm
- Nitto Tallux quill stem, ST1-2609 - 26.0mm - 9cm
- Nitto S65 Crystal Fellow seat post 27.2 x 250
- Fizik bar-tape

Cash, price is firm, you pick up.

• do NOT contact me with unsolicited services or offers

Rocket-Sauce 

https://boston.craigslist.org/bmw/bo...154548009.html

Waterford 2200 Frame 56cm - $275 (Dover)

Frame includes:
Wound-up Carbon Fork (with rake matching original steel fork).
Chris King 1" Nothreadset
American Classic Seatpost (not shown)
Dura-ace front derailleur (9 speed)

Frame was repainted by Hot Tubes, but was built up and ridden since.

• do NOT contact me with unsolicited services or offers

sheddle

This piece of French goodness has been up for two weeks with no hits- seems like a fair price for what looks like a mostly stock GR.

https://seattle.craigslist.org/est/b...147222630.html

70's French Motobecane Grande Record 531 Reynolds Campagnolo 53cm 21" - $450 (renton)

sheddle

1980 SR Semi-Pro 53cm Full Shimano 600 Arabesque groupset - $180

Quality Japanese bike that doesn't pop up too much- $180 seems like a good deal here.

https://seattle.craigslist.org/tac/b...155648432.html

phtomita

^^^ the map shows somewhere in Kansas???

madpogue 

^^^^^^ It's not in Kansas anymore (ad is gone).

sheddle

it's up again, with a Tacoma location.

https://seattle.craigslist.org/tac/b...155706748.html

canopus 

I love this color. Maybe not the tape...
Cannondale SR 500 Complete Road Bike 22.5” Great - $200 (Houston)

2cam16

And gone again. lol

Clang

Peugeot - $45 (Lakeville, MN)

https://www.facebook.com/marketplace...8238115481630/

Zestiquant

Road Bycicle
CA$250
https://www.facebook.com/marketplace...89701488012596


Pretty good Miyata 912
No space in the stable for this one A bit too big too.

sheddle

Might actually be legit this time, road bikes under $200 seem to have a lifespan of a few hours.

smontanaro 

70s Paramount with SA three-speed?

https://chicago.craigslist.org/chc/b...155480040.html

machinist42

French pista 55cm - $400 (Sanford, Pinehurst)

Posted 2020-07-09 13:09





"I've tinkered with this over the years and gradually built up a hodge podge of track parts.

Frame- not sure of the make but I'm certain it's French from the threading, tube diameter and BCM lugs. My guess is a Bernard carre, mercier, or something of the like. I had once planned to have it powder coated but I dug the patina of it and it was just my commuter.

Bars- NJS Nitro BB123
Stem- NJS SR Dakar
Fork- NJS Watanabe
Headset- NJS Dura Ace
Chain- NHS HKK vertex blue
Cranks- Miche Primato
Pedals- Look KEO
Saddle- new NOS selle san Marco supercorsa concor
Stem- SR
Wheels- Araya track wheels
Hubs- sunshine (sansin) pro am -very nice.

I'm asking 400...the wheels and crankset are worth that alone so I'm firm on price.

bicycle frame material: steel
bicycle type: track
frame size: 55cm
wheel size: 700C"

https://raleigh.craigslist.org/bik/d...156293497.html