Trainer Stand for 3 Speeds?
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Lexington, MA
Posts: 291
Bikes: 1968 Raleigh Sports, 1970 Raleigh Twenty
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Trainer Stand for 3 Speeds?
I'm looking for a trainer stand that will fit my old 3 speeds. I have a 68 Raleigh Sports and a 70 Raleigh Twenty. I'm considering an inexpensive trainer stand like the Conquer Magnetic.
These kind of stands are obviously designed for modern bikes, and come with a quick release skewer to fit the cups in the trainer stand. My question is: will the cups fit the Raleigh axle?
I did a search on the forums, and found one thread where a guy said he was able to make a (unnamed) trainer stand work with a 3 speed by removing the indicator chain and the long axle nut. The trade off was the bike reverted to single speed, which is OK with me. Since details were rather vague, I wonder if anyone has any experience or advice regarding fitting inexpensive trainer stands to 3 speeds. Thanks in advance! -
These kind of stands are obviously designed for modern bikes, and come with a quick release skewer to fit the cups in the trainer stand. My question is: will the cups fit the Raleigh axle?
I did a search on the forums, and found one thread where a guy said he was able to make a (unnamed) trainer stand work with a 3 speed by removing the indicator chain and the long axle nut. The trade off was the bike reverted to single speed, which is OK with me. Since details were rather vague, I wonder if anyone has any experience or advice regarding fitting inexpensive trainer stands to 3 speeds. Thanks in advance! -
#2
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,702
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,008 Times
in
1,107 Posts
I can't remember which trainer manufacturer made one but somebody made an adapter for THEIR trainer to accommodate IGHs. I found one online but it wouldn't fit my dads trainer. So I suggest you find the adapter and get a trainer that fits it. (I don't recall the brands that I was dealing with.)
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#3
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Lexington, MA
Posts: 291
Bikes: 1968 Raleigh Sports, 1970 Raleigh Twenty
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
OK, looked around a bit more, and this adapter may be an option.
#4
Senior Member
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times
in
270 Posts
You could get a set of rollers to avoid the issue, but rollers do take a bit to learn to ride, it is like riding a bike, but it also isn't. They pop up used around me for ~$60 now and then.
#5
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
The problem with those bikes is the indicator chain for the shift cable that exits the right side of the hub and goes through the nut. You'd need something with a slot to clear that in order to make it work, something like the socket for an automotive oxygen sensor. Might take some tweaking to cut it down and make it all work.
The alternative would be to use a trainer like the old Vetta that did not support the bike by the rear axle ends, but then you have to remove the front wheel and the kickstand in order to mount the bike on the trainer.
The alternative would be to use a trainer like the old Vetta that did not support the bike by the rear axle ends, but then you have to remove the front wheel and the kickstand in order to mount the bike on the trainer.
Last edited by thumpism; 03-19-20 at 10:04 AM.
#6
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Lexington, MA
Posts: 291
Bikes: 1968 Raleigh Sports, 1970 Raleigh Twenty
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Theoretically I could remove the indicator chain and the long axle nut. Yes, the shifter no longer functions and the bike reverts to single speed, but that's OK with me.
#7
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,874
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1856 Post(s)
Liked 664 Times
in
506 Posts
I can't remember which trainer manufacturer made one but somebody made an adapter for THEIR trainer to accommodate IGHs. I found one online but it wouldn't fit my dads trainer. So I suggest you find the adapter and get a trainer that fits it. (I don't recall the brands that I was dealing with.)
#8
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
#9
Senior Member
Thread Starter
Join Date: Mar 2011
Location: Lexington, MA
Posts: 291
Bikes: 1968 Raleigh Sports, 1970 Raleigh Twenty
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Good point. I have some junk indicator chains/spindles that fit the SA 3 speed hub. Probably could saw and drill one to create a jam-lock that keeps it in the middle gear. (I don’t have the means to cut and drill a hardened steel socket to make an adapter as you suggested above)
Last edited by w1gfh; 03-19-20 at 03:38 PM.
#10
Senior Member
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times
in
270 Posts
Good point. I have some junk indicator chains/spindles that fit the SA 3 speed hub. Probably could saw and drill one to create a jam-lock that keeps it in the middle gear. (I don’t have the means to cut and drill a hardened steel socket to make an adapter as you suggested above)
#11
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,417
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 529 Post(s)
Liked 1,000 Times
in
513 Posts
If you have a Shimano 3 speed hub, you can remove the bell-crank and use an acorn nut to hold the shift rod in whatever gear you like.