Cannondale Criterium with "Corrosion"
#1
Member
Thread Starter
Join Date: Feb 2017
Location: Upper Manhattan, NYC
Posts: 46
Bikes: 2015 Jamis Aurora
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Cannondale Criterium with "Corrosion"
I've been looking for a vintage Cannondale to build up if for no other reason than I like the way they look and have an older 600 groupset to use on it. I've found a rough looking frame, but I see that, among other things, there are bubbles and blistering under the paint. What should one make of this? I didn't realize you could have this kind of damage on an aluminum bike. Could I strip it and repaint? Price is $62.99 or best offer. A waste of money?
The link: https://www.ebay.com/itm/56-cm-Canno...KWP-:rk:2:pf:0
The link: https://www.ebay.com/itm/56-cm-Canno...KWP-:rk:2:pf:0
#2
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,660
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1610 Post(s)
Liked 2,590 Times
in
1,224 Posts
Yes, see that a lot on boats. Sweat, salty sport drinks will eat it up.
#3
Senior Member
#4
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
The damage is cosmetic, although the bottle screws could be frozen.
If you repaint it, plan ahead for dealing with the top tube cable guides.
If you repaint it, plan ahead for dealing with the top tube cable guides.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#5
Senior Member
Join Date: Aug 2015
Posts: 3,302
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1143 Post(s)
Liked 1,740 Times
in
961 Posts
I would pass, I've run into corrosion just thinking oh a little sweat spot. So I took a knife to the spot, flaked the paint off and the corrosive ate all the way through to the point of looking like a worm hole. The frame pictured looks a lot worse than the tiny spot that I'm chatting about.
I'll get that pulled and take a shot for you.
I'll get that pulled and take a shot for you.
#6
Sophomore Member
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,057 Times
in
631 Posts
I would guess that maybe some road salt and perspiration got under the paint through a chip and bubbled up the paint from underneath. I would have zero hesitation about stripping the existing paint, and sanding, primering and repainting (or powdercoating) that frame. Cannondale frames are massively over-built, and a little bit of paint corrosion, IMO, would not affect the structural integrity.
However, I'm no expert on aluminum corrosion though, maybe someone here who is can correct me, I would welcome the knowledge.
However, I'm no expert on aluminum corrosion though, maybe someone here who is can correct me, I would welcome the knowledge.
#7
Senior Member
Join Date: Mar 2014
Location: City of Angels
Posts: 4,870
Bikes: A few too many
Mentioned: 42 Post(s)
Tagged: 1 Thread(s)
Quoted: 1364 Post(s)
Liked 2,181 Times
in
1,183 Posts
OP,
From the pics it is hard to tell how bad the corrosion really is, to my eyes at this point it is cosmetic and should clean up and be fine with a repaint...."but" at 100 for the frame and 50-75 for powder cote you might be in for 175 the frame only.
I see "dales" in my area for 200 to 300.. I think that you can find a complete in that price range depending on where you are located.
I would buy a complete bike, but that is just my opinion.
Good luck, Ben
From the pics it is hard to tell how bad the corrosion really is, to my eyes at this point it is cosmetic and should clean up and be fine with a repaint...."but" at 100 for the frame and 50-75 for powder cote you might be in for 175 the frame only.
I see "dales" in my area for 200 to 300.. I think that you can find a complete in that price range depending on where you are located.
I would buy a complete bike, but that is just my opinion.
Good luck, Ben
__________________
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
"EVERY PERSON IS GUILTY OF ALL THE GOOD THEY DID NOT DO"
Voltaire
Voice recognition may sometimes create odd spelling and grammatical errors
Last edited by xiaoman1; 01-06-19 at 05:36 PM.
#8
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,926 Times
in
1,491 Posts
With shipping it is closer to $90. Do have space and the skill to repaint? If you've never ridden a Cannondale before I would pass, whay put all that time and effort into repainting something you may not like? Let someone deal with it.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#9
52psi
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,015
Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 802 Times
in
391 Posts
Gotta be a better example out there.
Patience.
Patience.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
#10
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
I think there is a reason the waterbottle bolts and bottom bracket are still installed. Roulette wheel spin equal. Feeling lucky today?
#11
Senior Member
I'm thinking high speed 4" grinder with a wire wheel, goggles, frame vise, ventilation, dust mask, etc. etc. etc. ...... Once you get all the crap off then, spray bomb it with a nice quality lacquer paint. Done deal.
#12
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26422 Post(s)
Liked 10,380 Times
in
7,208 Posts
..the paint that is on there now will strip off pretty easily with a chemical stripper from Home Depot. The bush on stuff is cheaper for more of it, but the spray can bomb is usually enough to do one frame and fork for me. Cannondale paint was not always real durable, and I've seen a few that have been repainted, including the one I ride now.
Stripping and painting a frame is time consuming, especially if you have no previous experience. But it's doable for most of us in a home, outdoor environment with reasonably good results. and decent auto quality paint is not cheap, decals will set you back another 40 bucks. Where I am, Cannondale's in pretty good (way better than that one) cosmetic condition show up regularly on the local CL for somewhere in the $300 range (complete bike). So personally, I would not go to the time and effort to paint one right now. Interesting bikes that are a significant artifact of a particular era in US bicycling, though. there are just a lot of them still around in better cosmetic condition that are very affordable.
Stripping and painting a frame is time consuming, especially if you have no previous experience. But it's doable for most of us in a home, outdoor environment with reasonably good results. and decent auto quality paint is not cheap, decals will set you back another 40 bucks. Where I am, Cannondale's in pretty good (way better than that one) cosmetic condition show up regularly on the local CL for somewhere in the $300 range (complete bike). So personally, I would not go to the time and effort to paint one right now. Interesting bikes that are a significant artifact of a particular era in US bicycling, though. there are just a lot of them still around in better cosmetic condition that are very affordable.
#13
Senior Member
Join Date: Sep 2015
Location: Massachusetts
Posts: 763
Bikes: S-Works Stumpjumper HT Disc, Fuji Absolute, Kona Jake the Snake, '85 Cannondale SR900
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 219 Post(s)
Liked 217 Times
in
142 Posts
I have an SR900 with a frame in similar condition as this paint. I’m riding it and will wait until after the winter so I can take my time doing it outside over a few days.
I’ve never repainted over aluminum, but I have done steel frames and the results were good and durable after using citrus-based stripper (took awhile and some scraping though) and good primer, plenty of time and sanding and re-coating, and then a bunch of light, somewhat smooth passes with Rustoleum can paint. It wasn’t perfect, but it was a massive improvement in each case, and I was able to sell one I rehabbed too.
The key is the time letting each layer harden, from what i can tell. So im planning to do the same thing, but with a primer that mentions aluminum application.
I’ve never repainted over aluminum, but I have done steel frames and the results were good and durable after using citrus-based stripper (took awhile and some scraping though) and good primer, plenty of time and sanding and re-coating, and then a bunch of light, somewhat smooth passes with Rustoleum can paint. It wasn’t perfect, but it was a massive improvement in each case, and I was able to sell one I rehabbed too.
The key is the time letting each layer harden, from what i can tell. So im planning to do the same thing, but with a primer that mentions aluminum application.
Last edited by Charliekeet; 01-13-19 at 10:37 AM.