WTB Stronglight Bottom Bracket
#1
Senior Member
Thread Starter
Join Date: May 2010
Location: Hurricane Alley , Florida
Posts: 3,903
Bikes: Treks (USA), Schwinn Paramount, Schwinn letour,Raleigh Team Professional, Gazelle GoldLine Racing, 2 Super Mondias, Carlton Professional.
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 30 Times
in
22 Posts
WTB Stronglight Bottom Bracket
Looking for a English thread Stronglight Bottom Bracket with 118mm Spindle, for a square taper 49D Crankset. What do you have...??
#2
Senior Member
#3
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
TA vs. Stronglight
Old style Stronglight BSC cups:
Stronglight Super Competition BSC cups:
A lot of cheap Stronglight BB spindles show up on eBay. They're roll formed and case hardened. They came with Stronglight cast aluminum TS, 100, 104 and other economy model crank sets. Look at the spindle tapers...
The GOOD spindles have machined surfaces on the tapers.
Machined flats on and old spindle:
Later spindle with machined flats:
TA cups are another alternative. We used to use them to replace Stronglight cups because they were better quality plus less money and more readily available for us.
Standard TA 344 spindles for doubles measure 114.5mm. The older ones were 116.5mm.
TA 373 spindles for triples are ~118mm.
Hope this helps a little...
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Last edited by verktyg; 05-24-20 at 10:46 PM.
Likes For verktyg:
#4
Senior Member
Thread Starter
Join Date: May 2010
Location: Hurricane Alley , Florida
Posts: 3,903
Bikes: Treks (USA), Schwinn Paramount, Schwinn letour,Raleigh Team Professional, Gazelle GoldLine Racing, 2 Super Mondias, Carlton Professional.
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 78 Post(s)
Liked 30 Times
in
22 Posts
Thanks Guys, for all the information.
#5
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
If cups are holding you back, but you can find a 118mm spindle, I've got a perfect set of english threaded cups, but they come with a "144" spindle, which measures 112mm on my calipers. I would sell the set to you for $40 shipped. Can post pictures if you're interested.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.