Removing braze-ons for the sake of making a "perfect" setup?
#1
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Removing braze-ons for the sake of making a "perfect" setup?
Howdy folks,
I have a lovely 1979 Mercian Campionissimo frame set. It was meant to be a 10-speed and has a peg on the down tube to hold a shifter boss in place, three shift cable guides, and two brake cable guides. It has stamped dropouts with no derailleur hanger. It was the "low end" frame offered by Mercian at the time and has Prugnat lugs, but is still built fully from butted Reynolds 531 tubing.
The frame is just my size and I really want to keep it, but I have enough multi-speed bikes and other frame projects that are less suitable for modification. I am missing a fixed gear bike in my stable, and I specifically want relaxed road-going geometry and don't necessarily care about track ends. I would like to keep and enjoy this frame, and have a rather elaborate paint scheme in mind for it as well. I can only imagine being bothered by all of the unused braze-ons after taking the time to paint the frame and set it up specifically as a fixed gear.
Assuming I actually pour a lot of time and effort into the paint, and know that I'll surely keep and enjoy riding the bicycle for many years to come, would people be put off by my chopping all of those little bits off of a Mercian? It strikes even myself as sacrilege to some extent but the frame is otherwise perfect for what I want - not to mention the fact that I also just really want a MERCIAN!
What say ye all? Time to let some controversial opinions roll!
-Gregory
I have a lovely 1979 Mercian Campionissimo frame set. It was meant to be a 10-speed and has a peg on the down tube to hold a shifter boss in place, three shift cable guides, and two brake cable guides. It has stamped dropouts with no derailleur hanger. It was the "low end" frame offered by Mercian at the time and has Prugnat lugs, but is still built fully from butted Reynolds 531 tubing.
The frame is just my size and I really want to keep it, but I have enough multi-speed bikes and other frame projects that are less suitable for modification. I am missing a fixed gear bike in my stable, and I specifically want relaxed road-going geometry and don't necessarily care about track ends. I would like to keep and enjoy this frame, and have a rather elaborate paint scheme in mind for it as well. I can only imagine being bothered by all of the unused braze-ons after taking the time to paint the frame and set it up specifically as a fixed gear.
Assuming I actually pour a lot of time and effort into the paint, and know that I'll surely keep and enjoy riding the bicycle for many years to come, would people be put off by my chopping all of those little bits off of a Mercian? It strikes even myself as sacrilege to some extent but the frame is otherwise perfect for what I want - not to mention the fact that I also just really want a MERCIAN!
What say ye all? Time to let some controversial opinions roll!
-Gregory
#2
Rustbelt Rider
Join Date: Oct 2008
Location: Canton, OH
Posts: 9,104
Bikes: 1990 Trek 1420 - 1978 Raleigh Professional - 1973 Schwinn Collegiate - 1974 Schwinn Suburban
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 261 Post(s)
Liked 372 Times
in
177 Posts
No. In my opinion, it is short sighted and needlessly destructive to remove the braze-ons. I do think a Mercian deserves better treatment.
However, it’s also your bicycle.
However, it’s also your bicycle.
__________________
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
|^^^^^^^^^^^^^^| ||
|......GO.BROWNS........| ||'|";, ___.
|_..._..._______===|=||_|__|..., ] -
"(@)'(@)"""''"**|(@)(@)*****''(@)
Likes For mkeller234:
#3
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
-Gregory
#4
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,137
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3369 Post(s)
Liked 3,658 Times
in
1,248 Posts
I'm going to go with no. Especially with a frame that looks that nice.
This is mostly from my own recent experience. I have a frame with a small crack in the BB shell / downtube braze joint, and one day I got bored and decided to hack off the shift bosses, cable guides, and the derailleur hanger so I could run it as a beater fixed gear. Just a few months later I was wishing I had a geared bike I could put on a trainer for the winter.
If you've got other options for geared bikes available, well then you're in a different situation than me, so you might not end up feeling the same way
This is mostly from my own recent experience. I have a frame with a small crack in the BB shell / downtube braze joint, and one day I got bored and decided to hack off the shift bosses, cable guides, and the derailleur hanger so I could run it as a beater fixed gear. Just a few months later I was wishing I had a geared bike I could put on a trainer for the winter.
If you've got other options for geared bikes available, well then you're in a different situation than me, so you might not end up feeling the same way
#5
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4339 Post(s)
Liked 2,983 Times
in
1,619 Posts
#6
Senior Member
Join Date: Sep 2017
Location: Greenville SC
Posts: 4,137
Bikes: 1975 Motobecane Grand Jubile, 2020 Holdsworth Competition, 2022 Giant Trance 29 3
Mentioned: 42 Post(s)
Tagged: 0 Thread(s)
Quoted: 3369 Post(s)
Liked 3,658 Times
in
1,248 Posts
Likes For abshipp:
#7
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
I find it ironic that just after I started this thread a lovely R.E.W. Reynolds "road/path" frame set with track ends and fender eyelets got listed on eBay, and here in the US!
https://www.ebay.com/itm/Vintage-R-E...kAAOSwsEpebSyL
Pretty much what I'd hope for in an ideal world... But I just bought another frame that hasn't even arrived yet! What a life...
https://www.ebay.com/itm/Vintage-R-E...kAAOSwsEpebSyL
Pretty much what I'd hope for in an ideal world... But I just bought another frame that hasn't even arrived yet! What a life...
Likes For Kilroy1988:
#8
Senior Member
Well, it's your frame and your paint gun and your angle grinder and everything so if that's what you want to do, it's not something I would do, but, yeah, go for it.
Something you might consider if you want a decent English fixed gear bike with a recongizable name is a Bob Jackson track frame. Current price seems to be about 413 BP, or about $520 at today's exchange rate. You could sell that Mercian for a nice bit of change to someone who wants to set it up for IGH(no hanger) and have the Jackson for probably less than a decent paint job.
You make a good point, I think, about people doing modifications to old bikes like adding brazed fittings for canti brakes, adding bottle bosses, etc. I'm having trouble justifying approval for one without approving of going the other way. Still, I wouldn't do it, not to a Mercian.
Something you might consider if you want a decent English fixed gear bike with a recongizable name is a Bob Jackson track frame. Current price seems to be about 413 BP, or about $520 at today's exchange rate. You could sell that Mercian for a nice bit of change to someone who wants to set it up for IGH(no hanger) and have the Jackson for probably less than a decent paint job.
You make a good point, I think, about people doing modifications to old bikes like adding brazed fittings for canti brakes, adding bottle bosses, etc. I'm having trouble justifying approval for one without approving of going the other way. Still, I wouldn't do it, not to a Mercian.
Likes For desconhecido:
#9
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Something you might consider if you want a decent English fixed gear bike with a recongizable name is a Bob Jackson track frame. Current price seems to be about 413 BP, or about $520 at today's exchange rate. You could sell that Mercian for a nice bit of change to someone who wants to set it up for IGH(no hanger) and have the Jackson for probably less than a decent paint job.
#10
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
I'd do my painting at my uncle's hot rod shop:
https://doublezhotrods.com/
It'd be done for the price of the paint in a professional booth with equipment they use for $20k+ paint jobs.
https://doublezhotrods.com/
It'd be done for the price of the paint in a professional booth with equipment they use for $20k+ paint jobs.
#11
Senior Member
Join Date: Aug 2010
Location: Wurundjeri Country
Posts: 2,469
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1079 Post(s)
Liked 1,900 Times
in
931 Posts
Having said that it’s your bike that you can do whatever you want to, but I don’t see why you can’t run it as a fixie with the braze-ons in place.
#12
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Yes I would. In fact if the paint was original I’d be struggling to remove it - or at least I’d be planning a trip to Derby, England once current viruses have subsided.
Having said that it’s your bike that you can do whatever you want to, but I don’t see why you can’t run it as a fixie with the braze-ons in place.
Having said that it’s your bike that you can do whatever you want to, but I don’t see why you can’t run it as a fixie with the braze-ons in place.
And the original paint is actually in poor condition. Lots of fading, scratches, light rust around the bottom bracket, and peeling decals. I already have a new decal set ready for fresh paint.
The frame only cost $150. I won't be investing several hundred dollars in a Mercian respray for a Campionissimo - perhaps a Vincitore!
#13
Senior Member
I have a Jackson World Tour that I bought in 2003. The paint job is pretty decent, simple enamel, and for what it is, I'm happy with it. My experience, overall, dealing with the purchase was ok. I've encountered people who eren't happy with the customer service, but I've never heard of someone being sold a bike with a poor quality paint job and being told to live with it.
Good luck in finding a suitable candidate. It's nice to have access to a proper spray booth with the features to properly and safely spray modern paints.
Good luck in finding a suitable candidate. It's nice to have access to a proper spray booth with the features to properly and safely spray modern paints.
#14
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Thanks! Whether I remove the braze-ons or not, I'll definitely go through with restoring and riding this frame. It's the first Mercian I've had in my possession and although my dream is to get a Vincitore, I won't let this one go so easily. Good to hear about your positive experience with Bob Jackson. I've heard a lot of that as well, but by way of comparison I've never come across any complaints about quality from most other shops... But the again, most other shops also charge more for (seemingly) similar end products!
#15
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
If you’re going to paint it, go ahead and do what you want with the braze ons. It’s not a museum piece. And the repaint departs
drastically from original, so why not take
it the rest of the way?
drastically from original, so why not take
it the rest of the way?
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
#16
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,827 Times
in
1,709 Posts
Adding or subtracting braze-ons seems to be less of a crime today than it was some five or six years ago. I blame/commend @gugie for this, at least as far as I'm concerned. Things were removed/filled in/added on my 83-ish Casati and it's a better bike for the mods. Sounds like the OP has a solid plan in mind for restoration, not some half-assed Drew-job, so add me to the "go for it" crowd.
OP: please post pics of the final result one day. I for one would love to see how it comes out.
DD
OP: please post pics of the final result one day. I for one would love to see how it comes out.
DD
#17
Senior Member
I vote leave it alone. Grinding stuff off is not going to be an aesthetic improvement. Let it be. If you ride it as a fixie for a while, a redundant shifter stop is going to be a lot less of an aesthetic hit that grinding it off, ruining the the history of the bike, and adding some cheap powder coat or whatever will destroy it completely. I'm not hardly a purist, but in this case, what's the point?
Is that shifter boss going to slow you down or something?
Is that shifter boss going to slow you down or something?
#18
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
I vote leave it alone. Grinding stuff off is not going to be an aesthetic improvement. Let it be. If you ride it as a fixie for a while, a redundant shifter stop is going to be a lot less of an aesthetic hit that grinding it off, ruining the the history of the bike, and adding some cheap powder coat or whatever will destroy it completely. I'm not hardly a purist, but in this case, what's the point?
But like I said, perhaps I just need to find a more suitable candidate.
#19
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
For me the reason to buy a vintage bike is because it is precisely that. The original braze-ons, paint, and even components are part of that appeal. So the question you should ask yourself is, do you actually want this Mercian, or do you want a "vintage-looking" fixed gear with new parts and paint?
If you've found a bike that tells a story, don't obscure its heritage. This frame can easily be cleaned up, waxed, polished, and built with periodish parts as a fixed racer. A lot more appeal there than flashing it up with new everything.
Just my opinion, of course.
If you've found a bike that tells a story, don't obscure its heritage. This frame can easily be cleaned up, waxed, polished, and built with periodish parts as a fixed racer. A lot more appeal there than flashing it up with new everything.
Just my opinion, of course.
#20
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,647
Bikes: It's complicated.
Mentioned: 1300 Post(s)
Tagged: 0 Thread(s)
Quoted: 4685 Post(s)
Liked 5,819 Times
in
2,292 Posts
The one thing I hate to see is a hacked off derailleur hanger by some fixie idjit. Make it a fixie, fine, but don't handicap it for future use.
Of course, this one never had one. Lots of old English lightweight frames with cheap stamped dropouts in the rear. I've got a super cool one in my shop right now with some holes in one of the seat stays (?), wondering what to do with it.
Other than that, have at it.
Of course, this one never had one. Lots of old English lightweight frames with cheap stamped dropouts in the rear. I've got a super cool one in my shop right now with some holes in one of the seat stays (?), wondering what to do with it.
Other than that, have at it.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#21
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,999
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1956 Post(s)
Liked 3,662 Times
in
1,680 Posts
I've heard some incredibly contrary things about the quality of Bob Jackon's paint work in particular. Stories of bubbles forming and fisheyes and peeling clear coats, all while the paint was still relatively new. I'm not sure I could risk that. One of the online reviewers quoted management as literally saying they "didn't pay for a quality job" considering their pricing!
Likes For 52telecaster:
#22
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18389 Post(s)
Liked 4,520 Times
in
3,359 Posts
I can imagine downtube shifter bosses getting in the way. Perhaps a front derailleur boss. But your frame has neither.
The rest all seems to be minimal bumps that I'd leave alone, although personally I wouldn't be using the pump pegs as they are, so I might consider removing those, but might just leave them as a unique bit of history.
I'm surprised that frame has top tube cable stops. Are you planning on using brakes? Again, I'd just leave those in place in case you chose to do something different.
The rest all seems to be minimal bumps that I'd leave alone, although personally I wouldn't be using the pump pegs as they are, so I might consider removing those, but might just leave them as a unique bit of history.
I'm surprised that frame has top tube cable stops. Are you planning on using brakes? Again, I'd just leave those in place in case you chose to do something different.
#23
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18389 Post(s)
Liked 4,520 Times
in
3,359 Posts
I will admit that I have the opposite problem on a project frame. The frame is from the 40's or 50's, but has a bunch of braze-ons that were added much more recently. And, if I build it back to something similar to the original specs, then newer braze-ons will be absolutely unnecessary. Unfortunately, it also has rather nice paint.
Likes For CliffordK:
#24
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,800
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3594 Post(s)
Liked 3,403 Times
in
1,936 Posts
The frame will work perfectly well as a fixed gear/single speed without going through the destructive bother of removing those bits. Removing them won't magically transform a Mercian road frame into a svelte hard-core track frame; nobody will be fooled.
#25
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,514
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,398 Times
in
2,093 Posts
The problem with this Mercian is even though it's low end, it's so nicely preserved that it'd be a shame to undo the look it has now. There's something to be said for the nicks, light fading, and thin paint of the era that doesn't come through with a nice, shiny paintjob.
You could build up virtually the same exact bike starting from a rusty Raleigh Grand Prix - and nobody would care what you cut off of a rusty GP.
Either way, I'd recommend building it up fixed and figuring out if you like the quality of the ride and the experience in the first place before committing a lot of time, effort, and money to modification.
-Kurt
You could build up virtually the same exact bike starting from a rusty Raleigh Grand Prix - and nobody would care what you cut off of a rusty GP.
Either way, I'd recommend building it up fixed and figuring out if you like the quality of the ride and the experience in the first place before committing a lot of time, effort, and money to modification.
-Kurt