Giant Roam upgrades and mods
#1
Junior Member
Thread Starter
Join Date: Sep 2017
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Giant Roam upgrades and mods
Hi guys, new here, thought I'd continue some good Giant Roam chat. I just bought a Roam 2 Disc 2018 a few months back, love it. Just interested to here what sort of upgrades or mods anyone has done with theirs?
I'm considering a few things. 1) Getting clipless pedals for it, look forward to that, just ordered from wiggle.
2) Has anyone considered lowering the handlebars? I've only just noticed the Roam has a few spacers under the handle bars to be lowered. I also have a road bike where I've taken some spacers out to give it a more aero dynamic position, however I've never really thought about this for the more mountain bike influenced Roam. Has anyone considered or done this? Will it be sacrificing the comfort unnecessarily?
3) Tyres are probably the only other thing I'd consider upgrading. It seeems pretty good as is to be honest, and I'm still relatively new to cycling so not sure if this is needed. How are the stock Roam tyres rated? I mean they seem fine so far though.
I'm considering a few things. 1) Getting clipless pedals for it, look forward to that, just ordered from wiggle.
2) Has anyone considered lowering the handlebars? I've only just noticed the Roam has a few spacers under the handle bars to be lowered. I also have a road bike where I've taken some spacers out to give it a more aero dynamic position, however I've never really thought about this for the more mountain bike influenced Roam. Has anyone considered or done this? Will it be sacrificing the comfort unnecessarily?
3) Tyres are probably the only other thing I'd consider upgrading. It seeems pretty good as is to be honest, and I'm still relatively new to cycling so not sure if this is needed. How are the stock Roam tyres rated? I mean they seem fine so far though.
#2
Senior Member
Join Date: May 2015
Posts: 122
Bikes: 2005 GIANT STP2, 2015 ROAM3, 1993 Trek 7900 Multitrack, Critical Single Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
For #2 try to chop off atleast 1-2" of handlebar as well so your shoulder will not be squared against the headwind. Boxer bar end helps too so you can lean further down(forward) for decrease profile. And also flip the stem also.
#3
Banned.
Join Date: Jan 2014
Location: Vegemite Island
Posts: 4,130
Bikes: 2017 Surly Troll with XT Drive Train, 2017 Merida Big Nine XT Edition, 2016 Giant Toughroad SLR 2, 1995 Trek 830
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1916 Post(s)
Liked 310 Times
in
218 Posts
Hi guys, new here, thought I'd continue some good Giant Roam chat. I just bought a Roam 2 Disc 2018 a few months back, love it. Just interested to here what sort of upgrades or mods anyone has done with theirs?
I'm considering a few things. 1) Getting clipless pedals for it, look forward to that, just ordered from wiggle.
2) Has anyone considered lowering the handlebars? I've only just noticed the Roam has a few spacers under the handle bars to be lowered. I also have a road bike where I've taken some spacers out to give it a more aero dynamic position, however I've never really thought about this for the more mountain bike influenced Roam. Has anyone considered or done this? Will it be sacrificing the comfort unnecessarily?
3) Tyres are probably the only other thing I'd consider upgrading. It seeems pretty good as is to be honest, and I'm still relatively new to cycling so not sure if this is needed. How are the stock Roam tyres rated? I mean they seem fine so far though.
I'm considering a few things. 1) Getting clipless pedals for it, look forward to that, just ordered from wiggle.
2) Has anyone considered lowering the handlebars? I've only just noticed the Roam has a few spacers under the handle bars to be lowered. I also have a road bike where I've taken some spacers out to give it a more aero dynamic position, however I've never really thought about this for the more mountain bike influenced Roam. Has anyone considered or done this? Will it be sacrificing the comfort unnecessarily?
3) Tyres are probably the only other thing I'd consider upgrading. It seeems pretty good as is to be honest, and I'm still relatively new to cycling so not sure if this is needed. How are the stock Roam tyres rated? I mean they seem fine so far though.
After a few months, I'd upgrade to M590 cranks.
Lighter, stiffer, better looking.
When I upgraded my ugly Acera crank to the M590, I noticed a nice difference in stiffness, which helped in climbing.
#4
Junior Member
Thread Starter
Join Date: Sep 2017
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What do you mean flip the stem?
#6
Interocitor Command
My '11 Roam-2 after a few mods/upgrades.
Ergon grips
UN-73 bottom bracket
Deore 9-speed shifters
Deore crankset
Deore 9-speed rear derailleur
14t-25t 9-speed cassette
Selle Italia Promax saddle
Shimano Saint pedals (not shown in photo)
Alex AT 400 wheels
700x32 tires
all new cables
repacked hubs and headset bearings
flipped stem
Ergon grips
UN-73 bottom bracket
Deore 9-speed shifters
Deore crankset
Deore 9-speed rear derailleur
14t-25t 9-speed cassette
Selle Italia Promax saddle
Shimano Saint pedals (not shown in photo)
Alex AT 400 wheels
700x32 tires
all new cables
repacked hubs and headset bearings
flipped stem
Last edited by Doctor Morbius; 09-20-17 at 01:55 AM.
#7
Senior Member
Join Date: Sep 2017
Posts: 64
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a 2013.
I put a rigid Surly fork on mine.
Richey stem that's lighter and shorter.
Race Face comp flat handlebar.
Deore xt rear derallieur. I have a 9 speed cassette and xt shifters I'll put on at a later date.
Clement mso xplor tires.
Imrider platform pedals
Esi chunky grips.
Weight went from around 32lbs to 27.6 lbs.
I put a rigid Surly fork on mine.
Richey stem that's lighter and shorter.
Race Face comp flat handlebar.
Deore xt rear derallieur. I have a 9 speed cassette and xt shifters I'll put on at a later date.
Clement mso xplor tires.
Imrider platform pedals
Esi chunky grips.
Weight went from around 32lbs to 27.6 lbs.
#9
Junior Member
Thread Starter
Join Date: Sep 2017
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My '11 Roam-2 after a few mods/upgrades.
Ergon grips
UN-73 bottom bracket
Deore 9-speed shifters
Deore crankset
Deore 9-speed rear derailleur
14t-25t 9-speed cassette
Selle Italia Promax saddle
Shimano Saint pedals (not shown in photo)
Alex AT 400 wheels
700x32 tires
all new cables
repacked hubs and headset bearings
flipped stem
Ergon grips
UN-73 bottom bracket
Deore 9-speed shifters
Deore crankset
Deore 9-speed rear derailleur
14t-25t 9-speed cassette
Selle Italia Promax saddle
Shimano Saint pedals (not shown in photo)
Alex AT 400 wheels
700x32 tires
all new cables
repacked hubs and headset bearings
flipped stem
#10
Senior Member
Join Date: May 2015
Posts: 122
Bikes: 2005 GIANT STP2, 2015 ROAM3, 1993 Trek 7900 Multitrack, Critical Single Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#11
Interocitor Command
#12
The Moose
Join Date: May 2016
Posts: 217
Bikes: 2016 Giant Roam 2, 2004 Norco Torrent, 1969 Raleigh Grand Prix
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
I've done many mods to mine.
1: Carbon fibre handlebar by Gravity.
2: Ergon GP2 grips with the stubby bar ends.
3: Shimano Deore XT hydraulic disc brakes.
4: RaceFace Ride 1x crankset.
5: Shimano XTR rear derailleur (9 speed).
6: Continental Cyclocross Speed tyres.
7: Continental inner tubes.
8: New KMC X9 chain.
9: Changed the front suspension to a rigid Kenesis CX fork.
10: FSA 70mm stem.
11: Fizik Aliante saddle.
I think that's it,...
Everything has made it better for me. It is a joy to ride.
1: Carbon fibre handlebar by Gravity.
2: Ergon GP2 grips with the stubby bar ends.
3: Shimano Deore XT hydraulic disc brakes.
4: RaceFace Ride 1x crankset.
5: Shimano XTR rear derailleur (9 speed).
6: Continental Cyclocross Speed tyres.
7: Continental inner tubes.
8: New KMC X9 chain.
9: Changed the front suspension to a rigid Kenesis CX fork.
10: FSA 70mm stem.
11: Fizik Aliante saddle.
I think that's it,...
Everything has made it better for me. It is a joy to ride.
#14
Senior Member
Join Date: Jul 2017
Location: Lacey, WA
Posts: 56
Bikes: Giant Roam 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've done many mods to mine.
1: Carbon fibre handlebar by Gravity.
2: Ergon GP2 grips with the stubby bar ends.
3: Shimano Deore XT hydraulic disc brakes.
4: RaceFace Ride 1x crankset.
5: Shimano XTR rear derailleur (9 speed).
6: Continental Cyclocross Speed tyres.
7: Continental inner tubes.
8: New KMC X9 chain.
9: Changed the front suspension to a rigid Kenesis CX fork.
10: FSA 70mm stem.
11: Fizik Aliante saddle.
I think that's it,...
Everything has made it better for me. It is a joy to ride.
1: Carbon fibre handlebar by Gravity.
2: Ergon GP2 grips with the stubby bar ends.
3: Shimano Deore XT hydraulic disc brakes.
4: RaceFace Ride 1x crankset.
5: Shimano XTR rear derailleur (9 speed).
6: Continental Cyclocross Speed tyres.
7: Continental inner tubes.
8: New KMC X9 chain.
9: Changed the front suspension to a rigid Kenesis CX fork.
10: FSA 70mm stem.
11: Fizik Aliante saddle.
I think that's it,...
Everything has made it better for me. It is a joy to ride.
Have you noticed a large difference in the change to a rigid fork? I'm noticing I'm not unlocking my suspension that much, and am considering changing it out.
#15
The Moose
Join Date: May 2016
Posts: 217
Bikes: 2016 Giant Roam 2, 2004 Norco Torrent, 1969 Raleigh Grand Prix
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 108 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Steeper head angle which sharpened the steering. The stock suspension was quite terrible to be honest. I find the ride more comfortable now. The fork is quite compliant.
#16
Junior Member
Thread Starter
Join Date: Sep 2017
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I've done many mods to mine.
1: Carbon fibre handlebar by Gravity.
2: Ergon GP2 grips with the stubby bar ends.
3: Shimano Deore XT hydraulic disc brakes.
4: RaceFace Ride 1x crankset.
5: Shimano XTR rear derailleur (9 speed).
6: Continental Cyclocross Speed tyres.
7: Continental inner tubes.
8: New KMC X9 chain.
9: Changed the front suspension to a rigid Kenesis CX fork.
10: FSA 70mm stem.
11: Fizik Aliante saddle.
I think that's it,...
Everything has made it better for me. It is a joy to ride.
1: Carbon fibre handlebar by Gravity.
2: Ergon GP2 grips with the stubby bar ends.
3: Shimano Deore XT hydraulic disc brakes.
4: RaceFace Ride 1x crankset.
5: Shimano XTR rear derailleur (9 speed).
6: Continental Cyclocross Speed tyres.
7: Continental inner tubes.
8: New KMC X9 chain.
9: Changed the front suspension to a rigid Kenesis CX fork.
10: FSA 70mm stem.
11: Fizik Aliante saddle.
I think that's it,...
Everything has made it better for me. It is a joy to ride.
#18
Senior Member
Join Date: May 2015
Posts: 122
Bikes: 2005 GIANT STP2, 2015 ROAM3, 1993 Trek 7900 Multitrack, Critical Single Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
So at 1 o'clock in the morning I converted my hard tail bike into a Rigid one.
This is a temporary fork. My mind is divided whether to spend a hundred or two to buy a nice and decent looking fork or sell it and buy a used/brand new rigid bike.
BTW my bike's weight prior to conversion was 30lbs. Its now just down to 25lbs.
#19
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,139
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1443 Post(s)
Liked 759 Times
in
568 Posts
Cool! If you do buy a new fork, I recommend looking for a "suspension-corrected" one. Your temporary fork has an axle-to-crown distance that is likely 50-100mm shorter than your suspension fork (at full extension). A shorter distance here physically lowers the front of the frame and, as that happens, the head tube angle becomes steeper (more towards 90 degrees. This can sometimes make the bike feel a little odd.
Suspension-corrected forks are longer rigid forks that have a similar axle-to-crown distance as suspension forks so, after you swap, your geometry remains about the same.
Suspension-corrected forks are longer rigid forks that have a similar axle-to-crown distance as suspension forks so, after you swap, your geometry remains about the same.
#20
Senior Member
Join Date: May 2015
Posts: 122
Bikes: 2005 GIANT STP2, 2015 ROAM3, 1993 Trek 7900 Multitrack, Critical Single Speed
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 20 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cool! If you do buy a new fork, I recommend looking for a "suspension-corrected" one. Your temporary fork has an axle-to-crown distance that is likely 50-100mm shorter than your suspension fork (at full extension). A shorter distance here physically lowers the front of the frame and, as that happens, the head tube angle becomes steeper (more towards 90 degrees. This can sometimes make the bike feel a little odd.
Suspension-corrected forks are longer rigid forks that have a similar axle-to-crown distance as suspension forks so, after you swap, your geometry remains about the same.
Suspension-corrected forks are longer rigid forks that have a similar axle-to-crown distance as suspension forks so, after you swap, your geometry remains about the same.
If ever im going to spend money for fork, i'll limit the budget to just $120-$150. More than that ill say sayonara to the bike.
#21
Senior Member
Join Date: Jul 2017
Location: Lacey, WA
Posts: 56
Bikes: Giant Roam 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Last night I cant sleep. Thinking of something back from homeland. Went to the basement and saw a rigid fork(caliper type) bought for $5 3 weeks ago. I thought its about time to answer the question that always linger whenever i do a century gravel races. How fast this bike(Roam3) will make me if i dont have front suspension?
So at 1 o'clock in the morning I converted my hard tail bike into a Rigid one.
This is a temporary fork. My mind is divided whether to spend a hundred or two to buy a nice and decent looking fork or sell it and buy a used/brand new rigid bike.
BTW my bike's weight prior to conversion was 30lbs. Its now just down to 25lbs.
So at 1 o'clock in the morning I converted my hard tail bike into a Rigid one.
This is a temporary fork. My mind is divided whether to spend a hundred or two to buy a nice and decent looking fork or sell it and buy a used/brand new rigid bike.
BTW my bike's weight prior to conversion was 30lbs. Its now just down to 25lbs.
#22
Member
Join Date: Sep 2017
Location: Houston, TX
Posts: 31
Bikes: Working on it...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Has anyone put wider tires on their Roam yet? I'm wondering if I can put 700x45s on it?
Last edited by breakwater; 10-14-17 at 10:31 PM.
#25
Member
Join Date: Sep 2017
Location: Houston, TX
Posts: 31
Bikes: Working on it...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts