Front pannier racks
#1
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Liked 0 Times
in
0 Posts
Front pannier racks
I’ve fitted Blackburn Custom Lowrider front pannier racks to my Cube SL Road Pro.
The forks have only one eyelet on the mid-fork outer side so there are two fixing points - the mid-fork eyelet using the spacer between the rack bars and to the fork dropout eyelet with a clip around the diagonal bar (wrapped in insulation tape for friction).
I used Ortlieb Back Roller City panniers on the racks today but was concerned about how secure the fitting is. The bolt used in the mid-fork is an M5 with thread lock applied. I’m also going to diagonally affix two cable ties as a fail safe.
Pics attached.
Thoughts?
The forks have only one eyelet on the mid-fork outer side so there are two fixing points - the mid-fork eyelet using the spacer between the rack bars and to the fork dropout eyelet with a clip around the diagonal bar (wrapped in insulation tape for friction).
I used Ortlieb Back Roller City panniers on the racks today but was concerned about how secure the fitting is. The bolt used in the mid-fork is an M5 with thread lock applied. I’m also going to diagonally affix two cable ties as a fail safe.
Pics attached.
Thoughts?
#2
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,355
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6215 Post(s)
Liked 4,213 Times
in
2,362 Posts
I’m not sure your set up is going to work. The arms of the on the rack are supposed to be on either side of the fork blade. That keeps it from twisting. I don’t think the way you have it now will be that stable. The regular hoop version of either the Blackburn or Tubus racks keeps the rack stable. You may need to add that hoop since you can’t clamp it on both sides of the fork.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#3
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
#1 : follow cyccommute's advice.
#2 : where did you come up with this installation? Were you following the manufacturers instructions?
When I was looking at front pannier racks, I downloaded the directions first. This was when I learned that a Tubus tara was the most accessible rack for my fork.
#2 : where did you come up with this installation? Were you following the manufacturers instructions?
When I was looking at front pannier racks, I downloaded the directions first. This was when I learned that a Tubus tara was the most accessible rack for my fork.
#4
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
I’m not sure your set up is going to work. The arms of the on the rack are supposed to be on either side of the fork blade. That keeps it from twisting. I don’t think the way you have it now will be that stable. The regular hoop version of either the Blackburn or Tubus racks keeps the rack stable. You may need to add that hoop since you can’t clamp it on both sides of the fork.
Likes For JohnDThompson:
#5
Senior Member
Join Date: Nov 2014
Location: Eastern Iowa
Posts: 631
Bikes: 2014 Trek Allant drop bar conversion, modified Schwinn MTN commuter, 2015 Trek 520, Soma ES, Salsa Journeyman, 1980 Trek 414
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 355 Times
in
166 Posts
I would not ride that with any sort of substantial load affixed to the rack. The upper mounting bolt will not be able withstand the leverage from the weight being thrown around and will want to bend, causing the rack to twist due to the play introduced. This could end quite catastrophically if the rack were to twist around the fork blade into the spokes. You will need to either modify the installation, or procure a rack designed to work with the mounting points provided on your particular fork.
#6
Senior Member
Join Date: Oct 2015
Posts: 15,483
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7649 Post(s)
Liked 3,469 Times
in
1,832 Posts
That upper mounting bolt will be the focus of a lot of stress, and will likely rip loose and possibly damage the mounting hole. You have created a lever to magnify force on what was supposed to be a double support minimizing force. Looks dangerous.
#7
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
#8
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
That is the wrong rack for this bike. You want a Tara lowrider..
#9
Senior Member
Join Date: Jun 2015
Location: Down Under
Posts: 1,936
Bikes: A steel framed 26" off road tourer from a manufacturer who thinks they are cool. Giant Anthem. Trek 720 Multiroad pub bike. 10 kids bikes all under 20". Assorted waifs and unfinished projects.
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Liked 1,154 Times
in
640 Posts
Yep, rack with a wheel loop in this case...
#10
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
Perhaps something like this:
But @Marcus_Ti's suggestion of a different model rack may still be better.
But @Marcus_Ti's suggestion of a different model rack may still be better.
#11
Newbie
Thread Starter
Join Date: Mar 2017
Posts: 24
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Liked 0 Times
in
0 Posts
Thanks for the replies. The spacer used between the rack bars is part of the OEM fitting kit. I had a previous bike with this setup and used it for many years without a problem but this one seems less stable.
#13
Senior Member
Join Date: Oct 2015
Posts: 15,483
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7649 Post(s)
Liked 3,469 Times
in
1,832 Posts
That looks like a metal fork. If it si .... could you not drill the inner side of the leg and tap it or insert a Riv-nut or whatever and use the rack as intended?
#14
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
A RivNut is unlikely to be strong enough to support a loaded pannier. Failure of the RivNut could easily progress to failure of the fork blade at the RivNut hole, which is unlikely to be a minor concern. The OP's rack is designed to be mounted on a tube that passes entirely through the fork blade and is brazed in place at both ends.
Likes For JohnDThompson:
#15
Senior Member
Join Date: Oct 2015
Posts: 15,483
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7649 Post(s)
Liked 3,469 Times
in
1,832 Posts
A RivNut is unlikely to be strong enough to support a loaded pannier. Failure of the RivNut could easily progress to failure of the fork blade at the RivNut hole, which is unlikely to be a minor concern. The OP's rack is designed to be mounted on a tube that passes entirely through the fork blade and is brazed in place at both ends.
If a riv-nut doesn't suit you---drill a larger hole, tap it, and thread in a steel tube, which is also internally tapped.
#16
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
If You look at the original suggested mounting method, with one rack tube on each side of the fork leg, thus splitting the force, two mounting points are obviously stronger than one, and there wouldn't be the fork-sized lever sticking out.
If a riv-nut doesn't suit you---drill a larger hole, tap it, and thread in a steel tube, which is also internally tapped.
If a riv-nut doesn't suit you---drill a larger hole, tap it, and thread in a steel tube, which is also internally tapped.
Likes For Unca_Sam:
#17
Senior Member
Join Date: Jan 2010
Posts: 39,230
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18409 Post(s)
Liked 15,520 Times
in
7,324 Posts
#18
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
I bought my Tara Rack this past winter for (checks ebay purchases) $60. They're listed regularly for just under $90 there. I didn't look too hard at the OP rack, but if they're the Blackburn racks I think they are, a tubus tara (or similar style) costs about the same retail.
#19
Senior Member
Join Date: Jan 2010
Posts: 39,230
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18409 Post(s)
Liked 15,520 Times
in
7,324 Posts
Whatchu talkin' 'bout, Fabz?
I bought my Tara Rack this past winter for (checks ebay purchases) $60. They're listed regularly for just under $90 there. I didn't look too hard at the OP rack, but if they're the Blackburn racks I think they are, a tubus tara (or similar style) costs about the same retail.
I bought my Tara Rack this past winter for (checks ebay purchases) $60. They're listed regularly for just under $90 there. I didn't look too hard at the OP rack, but if they're the Blackburn racks I think they are, a tubus tara (or similar style) costs about the same retail.
Me? I pay top dollar for Riv racks.
#20
Senior Member
Join Date: Oct 2015
Posts: 15,483
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7649 Post(s)
Liked 3,469 Times
in
1,832 Posts