Old school RTL510 saddlebag mount #2
#1
Too slow
Thread Starter
Old school RTL510 saddlebag mount #2
Cut & filed a strip of aluminum from an expired license plate.
Used the mount as a guide to mark & drill 2 holes.
Used two 3 mm screws to self tap the aluminum.
Used the mount & an awl to poke two holes in the seat bag material.
Fastened the screws to the backing plate.
Used the mount as a guide to mark & drill 2 holes.
Used two 3 mm screws to self tap the aluminum.
Used the mount & an awl to poke two holes in the seat bag material.
Fastened the screws to the backing plate.
Last edited by 44.5mph; 11-18-19 at 08:13 PM.
#2
Senior Member
Join Date: Jun 2011
Location: Tampa, Florida
Posts: 5,585
Bikes: 2017 Colnago C-RS, 2012 Colnago Ace, 2010 Giant Cypress hybrid
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 408 Post(s)
Liked 122 Times
in
85 Posts
That'll work!
__________________
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress