Bianchi Rekord 841
#1
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Bianchi Rekord 841
Hi guys and gals, I recently purchased a Bianchi rekord 841 frame and am looking to make it a single speed city bike for taking to the breweries/etc. I'll be posting pictures when I receive the frame, but for now I'm just trying to read up on the best parts to build it. I'm also looking for information on the frame and I figured this might be a good resource. I have no clue what year it is, but I do know it is a Bianchi rekord 841 in blue ice metallic and I do have the serial number. I am hoping this is actually an Italian made Bianchi, but I'm betting it's a Japanese frame because I got it for $100 on eBay.
#2
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,038 Times
in
1,876 Posts
With a Rekord model name, it's almost certainly Italian manufacture and a non-USA market model. The serial number should indicate the country of origin and year.
#3
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
You can link to the Ebay listing for now. Also, please don't cut anything off of the frame, especially if it turns out to be Italian made.
#4
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,798
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1393 Post(s)
Liked 1,326 Times
in
837 Posts
Amen to that! Keep your -- or a future owner's -- options open.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#5
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,650
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 3091 Post(s)
Liked 6,601 Times
in
3,785 Posts
#6
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,184
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1199 Post(s)
Liked 1,355 Times
in
717 Posts
I had planned on buying that one but my question is why OP didnt buy a single speed frameset.
+1 on dont cut anything off
+1 on dont cut anything off
#7
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,927 Times
in
1,492 Posts
Judging from the decal style, I would put that frame around ‘86ish. I think that Tubi Calibrati sticker means HiTen tubing so this would be like a US marker Strada frameset
#8
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Yes, that was the correct listing. Thanks to all who contributed. I was thinking it was '85-'87, but didn't have anything to base it off of. Serial looks to be 165422.
Last edited by vailskier3; 09-26-18 at 02:02 PM. Reason: added thanks.
#9
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,184
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1199 Post(s)
Liked 1,355 Times
in
717 Posts
I just wanted any bianchi frame in my size. I didn't care what it was and happened to like this one. I will not be cutting anything off of it. Just wanted to make a cheap single speed. Lighter weight especially since it's a steel frame, and less maintenance. This is really just going to be a fun bike for riding to dinner with the wife, going to breweries, etc. I live in FL, so there are no hills. Why not a single speed?
#10
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
I agree. Love the color. Can't wait to start building it. I still haven't received it, but I'm going to start with bottom bracket, then crankset. I'm trying to decide if I go vintage crankset, or new...
#11
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,038 Times
in
1,876 Posts
European market, entry level racing frame, circa 1985-1987, manufactured in Italy, by Chiorda, using hi-tensile steel. That assumes the decals the decals are OEM but frame features corroborate the time frame and lower level.
#12
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Thanks for the input! It's really hard to find anything on this bike. I can hardly find any rekord 841's on the google machine. Anyways, I love it and can't wait to get started!
#13
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Ok, so first purchase was crankset. I ended up getting a vintage Ofmega Bianchi branded crankset with a 52/42 and I removed the 52. Planning on running the 42 with maybe a 15t or 16t on the rear. Haven't figured that out yet. Pics later.
#14
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Okay, so i attempted install of my bottom bracket last night and I have a couple questions since there were zero instructions in the box (shimano bb-un55 italian threaded 70x110mm FYI):
1. I installed the cartridge side first, and then the cup side. Is this right?
2. Does it matter which side the cup is on?
3. It felt a little grindy, but maybe felt like it was supposed to be hard to tighten down. Is this normal?
4. There are maybe a couple mm of threads still showing as i tightened them down as much as I could, is this normal?
Hoping that I didn't completely mess up my build!
1. I installed the cartridge side first, and then the cup side. Is this right?
2. Does it matter which side the cup is on?
3. It felt a little grindy, but maybe felt like it was supposed to be hard to tighten down. Is this normal?
4. There are maybe a couple mm of threads still showing as i tightened them down as much as I could, is this normal?
Hoping that I didn't completely mess up my build!
#15
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
Cartridge goes in drive side. Threads showing on non drive side is ok. I usually put cartridge in first but if non drive side is plastic sometimes I reverse procedure. In the second case you have to estimate how far to put non drive side in.
Last edited by 52telecaster; 10-24-18 at 03:33 PM.
#16
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Perfect! Thank you! I was so scared I messed it up!
#17
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Just take it slow and have fun, for references you can look up Sheldon Brown on the web and RJ the bike guy on Youtube and Randy Jawa's (forum member) site Mytendspeeds. And of course ask the forum chances are someone will know,. And pictures, we love pictures.
Also a hop based beverage while you work is often referred to as a Patience Enhancer.
Also a hop based beverage while you work is often referred to as a Patience Enhancer.
#18
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
funny you should mention that. my brother and i usually describe how difficult a job is based on the number of beers you would drink in the time it takes you to complete the task. also, i referenced sheldon brown, but i couldn't find the details on whether or not cartridge went on the drive side even with italian threaded bb. also, he didn't have info on whether or not a couple threads showing was a big deal. there is great information on his site, but i was feeling like i had very specific questions that i needed answered.
#20
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1955 Post(s)
Liked 3,661 Times
in
1,679 Posts
#21
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
okay, i have about $100 for wheels. should i buy them premade, or buy hubs and have wheels built? opinions?
#22
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
Wheels and Rear Dropout Spacing
You may not have thought of this yet. Your frame will have rear dropout spacing (inside to inside) for a geared bike of that era. So, it might be 126mm or it might have been widened by a prior owner. Your wheelset, if a classic single speed or flip-flop hub, will be more like 120mm. Have you thought whether or not you'll cold set the frame to a narrower width (it affects chainline by half the distance difference)? You can do it yourself or you can find a competent shop that will do it for you.
$100 won't get you much in the way of new wheels. Have you looked at your local Craigslist and Facebook for sale to see what single speed wheelsets are out there? Might be more economical for you. Look for a machined braking surface on the rims, if possible.
$100 won't get you much in the way of new wheels. Have you looked at your local Craigslist and Facebook for sale to see what single speed wheelsets are out there? Might be more economical for you. Look for a machined braking surface on the rims, if possible.
#23
Senior Member
Thread Starter
Join Date: Sep 2018
Location: St. Petersburg, FL
Posts: 61
Bikes: 2011 GT Series 2 SRAM Apex, 1980's Bianchi Rekord 841, 1954 Schwinn Twinn
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
i think it is 130mm, and I was planning on just running spacers for the rear cog to straighten up the chainline. i've kind of had my eye on mavic aksiums. seen a few sets around $100, but just wanted to see if anyone else had good ideas or a better route to go. trying to build this bike pretty cheap, but also as best as i can.
#24
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26424 Post(s)
Liked 10,380 Times
in
7,208 Posts
...Aksiums are go-fast wheels. If that's your main purpose then they are a good value. If you're looking for something that's durable and user friendly for service and truing, you might want to go a little more old school.
#25
Senior Member
Join Date: Feb 2014
Location: Pasadena, CA
Posts: 4,848
Bikes: Schwinn Varsity
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1931 Post(s)
Liked 742 Times
in
422 Posts
I think the drop out spacing is 126. But I do not have the frame in hand. Only the OP has the frame. Measure, don't guess.