Replacing aluminum fork w/ composite, switching from theaded to threadless
#1
Full Member
Thread Starter
Join Date: Jul 2013
Location: Indiana
Posts: 353
Bikes: '84 Paramount, '89 Schwinn 754, '13 Specialized RockHopper, Trek Domane 4.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 10 Times
in
3 Posts
Replacing aluminum fork w/ composite, switching from theaded to threadless
This may be an obvious question but want to make sure I know what I'm getting into before I do this.) We have an older Trek 2100 that I'm wanting to replace the stock aluminum fork with a Reynolds composite 1 1/8 threadless fork. I assume I will have to change out the headset. I've already got stems, spacers, cap & pretty much everything else I'd need. I've never changed out headset before. I assume I'll probably need to take it to a LBS to have them change out the headset as I don't have a press. What else do I need to be aware of for this?
#2
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,364
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 641 Times
in
437 Posts
you might wanna check that headtube/fork/size.
a model name which used for a lot of years
early stuff was 1" threaded, later years were 1 1/8 threadless (with crapon fork)...
if it's 1" you'll need a 1" headset and 1" fork
when you have the right stuff, yes, go to a good LBS and have them install the cups and race.
could be done with simple tools - but better to not screw it up - watch them do it...
a model name which used for a lot of years
early stuff was 1" threaded, later years were 1 1/8 threadless (with crapon fork)...
if it's 1" you'll need a 1" headset and 1" fork
when you have the right stuff, yes, go to a good LBS and have them install the cups and race.
could be done with simple tools - but better to not screw it up - watch them do it...
#5
OM boy
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,364
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 641 Times
in
437 Posts
vast majority of threadless stems are 1 1/8, an adaptor sleeve is used to work with 1" steerer.
Sleeves are commonly available at most any lbs or online - some are overpriced, all are the same.
Sleeves are commonly available at most any lbs or online - some are overpriced, all are the same.
#6
Full Member
Thread Starter
Join Date: Jul 2013
Location: Indiana
Posts: 353
Bikes: '84 Paramount, '89 Schwinn 754, '13 Specialized RockHopper, Trek Domane 4.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 10 Times
in
3 Posts
I actually might just shelve the idea of replacing the fork for now as I'd rather invest the $$ in other upgrades on other bikes or replace the 2100 all together. My wife has been talking about wanting a new bike so we may go that route and Christmas is around the corner. Since I'm looking into the idea, I may replace the steel fork on my old Paramount. Its already using a threadless stem adapter. Plus I've replaced/upgraded about everything else on it so it would really make more sense to do that one between the two.
#7
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,545
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1528 Post(s)
Liked 718 Times
in
510 Posts
Unless you're a hot-rodder like me, you're probably best off leaving older bikes mostly original... a set of modern wheels and brifters/RD is plenty of upgrade for a nice old bike. Dual-pivot front brake is a good idea.
If you want a bike with threadless and external BB and fat bars and all that cool stuff, you're best off buying a modern bike IMO.
If you want a bike with threadless and external BB and fat bars and all that cool stuff, you're best off buying a modern bike IMO.
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
#8
Full Member
Thread Starter
Join Date: Jul 2013
Location: Indiana
Posts: 353
Bikes: '84 Paramount, '89 Schwinn 754, '13 Specialized RockHopper, Trek Domane 4.3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 10 Times
in
3 Posts
The bike is a borderline hot rod. Its an older Paramount PDG Series 3. Previous owner ripped off the stock 7 speed RX100 and put on 8 speed Dura Ace. I replaced the down tube shifters with brifters, put on the theadless stem & adapter and recently replaced the stock Araya rims with some 24 spoke Bontragers. The rims don't affect the way it rides or handles (at least not that I can tell) but look way cooler. Also put on a new Selle Itallia saddle. It has stock rX100 dual pivot brakes on it. If I can find matching dual pivot DA's cheap enough I'll replace them to match the drive train but not really on the replace list. See attached for shot of Paramount.
#9
Senior Member
Join Date: Dec 2009
Location: Arkansas
Posts: 90
Bikes: 2012 Cannondale Synapse 3 2010 Cannondale F5 1972 Raleigh Super Course 1981 Univega Gran Turismo 1985 Specialized Sequoia 1991 Klein Quantum
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 4 Times
in
1 Post
I did the same thing with a 1998 Raleigh 600. The carbon fork made a huge difference in ride quality. My hands and shoulders felt much better after a long ride so it wasn't definitely worth the money to complete the upgrade. I did use 1 1/8" stem with a shim. It worked fine and was pretty inexpensive.
#10
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
I used to have one of the original Trek 2000s, glued aluminum frames. I always thought the frame was great, but the aluminum fork sucked, especially in appearance. A nice 1" carbon fork would be a big improvement for your frame. I suggest you look at the Columbus Minimal Road Fork at wiggle.com. Decent price and very light weight. That combination is not easy to find in a 1" carbon fork these days.