Shifting issues...head banging.....!
#1
Newbie
Thread Starter
Join Date: Nov 2019
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Shifting issues...head banging.....!
hi guys , advice please... Been in the trade for 20+ years and this has me stumped... Tiagra 10sp shifters. 4600 , on a spez secteur ( not that that matters but hay). new hanger , new outter cables. slick inner cable. new rear mech. ( tiagra 4700) and it just wont shift right. smooth as silk cable action but not lining up with the cogs. ever good going up the gears but crap and out of line coming down, or good coming down the gears but crap going up... other that changing the shifter its a new group set.. any advise will be good. (frame is all true by the way). many thanks.
#2
Senior Member
Join Date: Aug 2006
Posts: 1,895
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Likes: 0
Liked 67 Times
in
53 Posts
The 4700 rear derailleur uses a different cable pull ratio to the other Shimano 10 speed road rear derailleurs.
You'll need either a different rear derailleur or a 4700 shifter.
You'll need either a different rear derailleur or a 4700 shifter.
Last edited by cobba; 11-21-19 at 05:31 AM.
#3
Senior Member
This is a good resource: https://productinfo.shimano.com/download/pdf/com/2.3/en.
#4
Newbie
Thread Starter
Join Date: Nov 2019
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#5
Senior Member
Join Date: Jan 2017
Posts: 1,064
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Likes: 0
Liked 122 Times
in
90 Posts
4700 RD uses the same cable pull ratio as the 11 speed road RD, so you could possibly upgrade to 11 speed in the future while using the same 4700 RD (and swapping 11 speed shifter.)
Last edited by tomtomtom123; 11-21-19 at 07:58 AM.
#6
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
You say you have a new hanger but you didn't say if it has been aligned with a gauge.
9-speed cassettes and above are real sensitive to precise hanger alignment and one of the ways bad alignment manifests itself is the issue you have described for us.
9-speed cassettes and above are real sensitive to precise hanger alignment and one of the ways bad alignment manifests itself is the issue you have described for us.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.