Selle Anatomica - not blown away
#1
Senior Member
Thread Starter
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
Selle Anatomica - not blown away
I recently got a Selle Anatomica H2 and am not blown away with it. It's not a comfortable as I remember my old (perfectly broken in) B17 (stolen 6 months ago).
I only have about 100 miles on it, so maybe it will break in and/or maybe I'll find a better adjustment setting, but it seems cramped compared to what I remember about the old B17.
(It's always an adjustment for me going from a traditional flat saddle to something like a B17 because with a flat saddle I can move fore-aft a bit, and a hammock saddle locks me into one spot - so maybe I just haven't re-adjusted to the hammock style yet.)
Anyone have any similar experience?
I only have about 100 miles on it, so maybe it will break in and/or maybe I'll find a better adjustment setting, but it seems cramped compared to what I remember about the old B17.
(It's always an adjustment for me going from a traditional flat saddle to something like a B17 because with a flat saddle I can move fore-aft a bit, and a hammock saddle locks me into one spot - so maybe I just haven't re-adjusted to the hammock style yet.)
Anyone have any similar experience?
#2
Senior Member
My experience going from a flat saddle to a hammock saddle mimics yours. Have not tried a Sella Anatomica, but suspect they take some break-in.
#3
Senior Member
Join Date: Apr 2016
Location: South Carolina Upstate
Posts: 2,109
Bikes: 2010 Fuji Absolute 3.0 1994 Trek 850
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 762 Post(s)
Liked 555 Times
in
322 Posts
just asking. if your old saddle was perfect why not just replace it instead of experimenting with SA?
#5
Old Legs
Join Date: Nov 2016
Location: Mass.
Posts: 1,212
Bikes: '80 Strayvaigin, '84 Ciocc Aelle-Shimano 105, '90 Concorde Astore /Campy Triple ,85 Bridgestone 500/Suntour, 2005 Jamis Quest, 2017 Raleigh Merit 1, Raleigh Carbon Clubman
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 302 Post(s)
Liked 33 Times
in
22 Posts
Yep, same here. Three of my bikes sport X1's and 1 has a SA Traditional . KB
#6
Senior Member
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917
Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 84 Times
in
62 Posts
I loved my SA. But... They had a habit of rails bending and I couldn't trust them for long distance bike packing.
I do love my Rivets though
I do love my Rivets though
#7
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,832 Times
in
2,229 Posts
B17 is too wide for me.
I like many split rail, narrow, more modern saddles as - for the easy fore/aft position.
But on my C&V it is suspended leather saddles almost exclusively.
I really like my SA, the Gyes is OK, too - but the cutout is shorter than SA's.
Brooks Pro & B15 (thinner leather than my previous B17s) works.
Ideale works.
Wrights works.
Belt works.
Palace works.
Even the Troxel still works with skirts tied.
But then I'm ambidextrous - can ride either left nutted or right nutted.
I like many split rail, narrow, more modern saddles as - for the easy fore/aft position.
But on my C&V it is suspended leather saddles almost exclusively.
I really like my SA, the Gyes is OK, too - but the cutout is shorter than SA's.
Brooks Pro & B15 (thinner leather than my previous B17s) works.
Ideale works.
Wrights works.
Belt works.
Palace works.
Even the Troxel still works with skirts tied.
But then I'm ambidextrous - can ride either left nutted or right nutted.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 08-01-19 at 06:55 PM.
#8
Senior Member
Absolutely love my H1. Kinda like to try a Brooks one day, but so far I have no reason to.
#9
Senior Member
I had a Selle Anatomica h2 and I could not get comfortable on it. I called them and they said to keep tilting the front of the saddle until you stop slipping on the back. I got to 3% tilted up and said no mas. I'm not sure if Brooks saddles have the same challenge.
#10
Senior Member
Join Date: Apr 2019
Location: oregon coast
Posts: 235
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Liked 76 Times
in
44 Posts
i haven't put a ton of miles on my x1 yet, and it's my first hammock style saddle, but i'm loving it so far. i also have new in box b17 sitting on a shelf that i'm planning to throw on ebay, but this thread makes me think i should just hang onto it, just in case
#11
Non omnino gravis
Likes For DrIsotope:
#12
velo-dilettante
Join Date: Apr 2009
Location: insane diego, california
Posts: 8,316
Bikes: 85 pinarello treviso steel, 88 nishiki olympic steel. 95 look kg 131 carbon, 11 trek madone 5.2 carbon
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 3,114 Times
in
1,683 Posts
in the market for a saddle after breaking a rail on my selle italia this week. borrowed the other exact saddle off the beater bike for the main one for now.
revisited the selle anatomica site and reacquainted myself with their products. i like the looks of their saddles but don't have enuff patience/dedication
these days to mess around with "dialing it in" when i can just plug and play. as much as i'd like to support a local san diego county company,
i'll probably purchase another selle italia at half the price this time and reevaluate in 1.5 years when that saddle is done.
revisited the selle anatomica site and reacquainted myself with their products. i like the looks of their saddles but don't have enuff patience/dedication
these days to mess around with "dialing it in" when i can just plug and play. as much as i'd like to support a local san diego county company,
i'll probably purchase another selle italia at half the price this time and reevaluate in 1.5 years when that saddle is done.
#13
Junior Member
After trying different saddles, the SA H2 is the single best cycling purchase I have made. Before, riding beyond 30 miles was a torture test. Now I can ride all day.
#14
Me duelen las nalgas
Join Date: Aug 2015
Location: Texas
Posts: 13,513
Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,802 Times
in
1,800 Posts
I rode a friend's bike with SA saddle around the block and had the same impression -- the hammock fit would lock me into one position. While it was comfortable, the ride was too short to judge.
For my road bikes I prefer the typical long, narrow, firm saddles because I scoot around a lot to suit the terrain and how hard or easily I want to pedal. Not sure I could adapt to a single position saddle.
For my road bikes I prefer the typical long, narrow, firm saddles because I scoot around a lot to suit the terrain and how hard or easily I want to pedal. Not sure I could adapt to a single position saddle.
#15
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,903
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4805 Post(s)
Liked 3,927 Times
in
2,553 Posts
I'm another who uses the entire saddle depending on the circumstances. Did it when I raced and have been doing it ever since. Had a leather Fuji saddle years ago that was a workable copy of a Brooks. Sitting on the rivets got really old and pushing all the way back wasn't much better. When that bike got stolen that seat leaving was a blessing.
I rode Selle Italias for decades until my body changed. Now it's the very similar Terry Fly; virtually the same seat but with a needed (and for me, well done) cutout.
Ben
I rode Selle Italias for decades until my body changed. Now it's the very similar Terry Fly; virtually the same seat but with a needed (and for me, well done) cutout.
Ben
#16
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,832 Times
in
2,229 Posts
I rode a friend's bike with SA saddle around the block and had the same impression -- the hammock fit would lock me into one position. While it was comfortable, the ride was too short to judge.
For my road bikes I prefer the typical long, narrow, firm saddles because I scoot around a lot to suit the terrain and how hard or easily I want to pedal. Not sure I could adapt to a single position saddle.
For my road bikes I prefer the typical long, narrow, firm saddles because I scoot around a lot to suit the terrain and how hard or easily I want to pedal. Not sure I could adapt to a single position saddle.
I agree with liking more modern long narrow firm saddles - center groove or split rail for me.
If the suspended leather saddle gives only 1 position then I would tighten the bolt. They clearly don't offer the movement one gets from long narrow modern, but mine allow me to rotate hips for a lower position and the cutout is beneficial. I can also push back on the rear if riding without my full weight on the saddle as in 'seated climbs' or long hard steady cruising. B17 with the thick leather was too wide for me. I never owned a Brooks with cutout (Imperial?).
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#17
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,621
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1663 Post(s)
Liked 1,817 Times
in
1,057 Posts
2019's tensioned leather saddle manufacturers:
Berthoud - France
Brooks - UK
Gyes (Cardiff, Dia Compe, Fyxation, Lekker, Origin8, Papillionaire, Shinola, Spa, Torelli, Velo Orange, Zimbale, etc.) - Taiwan
Ideale - France
Lepper - Netherlands
Nasiruddin (Persons) - India
Rivet - AFAIK manufactured in Taiwan by Gyes but to their own proprietary designs
Sella Italia - Italy
Selle Anatomica - USA
Selle Monte Grappa - Italy
Tabor - Portugal
Berthoud - France
Brooks - UK
Gyes (Cardiff, Dia Compe, Fyxation, Lekker, Origin8, Papillionaire, Shinola, Spa, Torelli, Velo Orange, Zimbale, etc.) - Taiwan
Ideale - France
Lepper - Netherlands
Nasiruddin (Persons) - India
Rivet - AFAIK manufactured in Taiwan by Gyes but to their own proprietary designs
Sella Italia - Italy
Selle Anatomica - USA
Selle Monte Grappa - Italy
Tabor - Portugal
#18
velo-dilettante
Join Date: Apr 2009
Location: insane diego, california
Posts: 8,316
Bikes: 85 pinarello treviso steel, 88 nishiki olympic steel. 95 look kg 131 carbon, 11 trek madone 5.2 carbon
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 3,114 Times
in
1,683 Posts
just dropped $70.02 on two (two!) matching selle italia saddles with this particular model being very comfy (up to 141 miles) in the recent past.
not feeling particularly flush with two weeks of vaca coming up and planning on hitting new mexico, utah and central/northern california. that
saved $50-$80 will buy a hotel night or 3-4 nights of campsites. undercarriage has been pretty happy with the selle italia experience for the price.
will still consider selle anatomica next saddle purchase if the financial timing is improved. figuring it'll be sooner rather than later as my two fave
selle italia models are seemingly discontinued and it's only a matter of time before all the subsidiary websites move through existing discounted stock.
has anyone ever bought 5-6 saddles at a time to hoard because they found a sweet spot?
not feeling particularly flush with two weeks of vaca coming up and planning on hitting new mexico, utah and central/northern california. that
saved $50-$80 will buy a hotel night or 3-4 nights of campsites. undercarriage has been pretty happy with the selle italia experience for the price.
will still consider selle anatomica next saddle purchase if the financial timing is improved. figuring it'll be sooner rather than later as my two fave
selle italia models are seemingly discontinued and it's only a matter of time before all the subsidiary websites move through existing discounted stock.
has anyone ever bought 5-6 saddles at a time to hoard because they found a sweet spot?
Last edited by diphthong; 08-03-19 at 04:45 AM.
#19
Senior Member
Thread Starter
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
edit: and now that I think about it, because of that fore-aft constraint, getting the position dialed in is more critical than with a flat saddle.
Last edited by tyrion; 08-03-19 at 12:34 PM.
#20
Senior Member
Thread Starter
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
After further riding and analyzing, I think I might not have enough setback. So I'll be trying a setback seatpost and see how it feels.
#21
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,874
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1856 Post(s)
Liked 664 Times
in
506 Posts
Both should start with checking the slot gap. S-A tells us to adjust the nose screw so the minimum slot gap is 6 mm. I use the flats across a 6 mm hex wrench as a gauge for this. If the gap is too wide, loosen. It it’s too narrow, tighten. This adjusts the resilience and suppleness of the saddle, and the sag as viewed from the side.
Then the first idea is to tilt up the saddle nose, on the hypothesis that you are sliding forward because you are sliding down the slope. So raising the nose aims to adjust the slope where your sitbones go (where the little dimples are) to be closer to level.
The second idea is to take the hypotheses that your body wants to be more forward. In this case slide the saddle forward a few millimeters at a time, then when your sitbones are supported, ride and see if you need any nose lift. You might not need any.
#22
Senior Member
Thread Starter
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
I loosened the tension a hair and that improved it. Or maybe I'm just getting used to it.
#23
Senior Member
Thread Starter
Join Date: Oct 2015
Location: San Diego, California
Posts: 4,077
Bikes: Velo Orange Piolet
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 2228 Post(s)
Liked 2,011 Times
in
972 Posts
EUREKA! Got a seatpost with more set-back, some fiddling with tension (actually tightened it back up a bit) and it's much better. This is going to work. No regrets for getting this saddle at this point.
Likes For tyrion:
#24
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,874
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1856 Post(s)
Liked 664 Times
in
506 Posts
Likes For Road Fan: