British Race Frame: 120mm dropout & 700c wheelset?
#1
Full Member
Thread Starter
Join Date: Nov 2010
Posts: 223
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 23 Times
in
6 Posts
British Race Frame: 120mm dropout & 700c wheelset?
I've been trying to research this but have struck out. I'm looking at a British-built racing frame online that has 120mm rear dropout spacing and is supposedly built for 700c rims. With my meager knowledge of frame-building history, I was sure that this frame would have been built for 5-speed 27" wheels (which I have all ready to go). But then I began to wonder if this may have been built for 700c tubulars rather than 27" clinchers. Were british frames made with 120mm. dropouts for 700c rims?
#2
.
Join Date: Aug 2005
Location: Rocket City, No'ala
Posts: 12,760
Bikes: 2014 Trek Domane 5.2, 1985 Pinarello Treviso, 1990 Gardin Shred, 2006 Bianchi San Jose
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 62 Post(s)
Likes: 0
Liked 28 Times
in
13 Posts
It probably was built for tubulars.
Pictures will be called for. Get cracking.
Pictures will be called for. Get cracking.
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,505
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3654 Post(s)
Liked 5,392 Times
in
2,737 Posts
My 1970s Raleigh Competition is 120 and 700 tubulars. I think the Pros and Intls were as well.
#4
Senior Member
Join Date: Feb 2008
Posts: 1,092
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I've been trying to research this but have struck out. I'm looking at a British-built racing frame online that has 120mm rear dropout spacing and is supposedly built for 700c rims. With my meager knowledge of frame-building history, I was sure that this frame would have been built for 5-speed 27" wheels (which I have all ready to go). But then I began to wonder if this may have been built for 700c tubulars rather than 27" clinchers. Were british frames made with 120mm. dropouts for 700c rims?
The answer is, it depends. Many old frames like that will be able to handle 700 or 27s with 47-57 calipers, or perhaps 610 centerpulls, but some can't. It was probably built around 700c wheels/tires though, unless it was for export specifically. The brake reach difference is around 5 mm, plus or minus a mm. 27s will give you a higher BB height of about that much, too, of course. I have a 1980s Woodrup 'Giro Touring' that can handle either, but with 1.125-inch 27s (which it has the moment) the BB height is about 11 inches. Pretty dang high, in my opinion, and a bit annoying, actually. I may change it to 700c wheels, just to get some TT clearance, as it is a 24-inch frame, but feels more like a 24.5 as far as standover.
#5
Senior Member
Join Date: Jul 2008
Location: Nampa Idaho
Posts: 1,081
Bikes: 76' Centrurion Pro-Tour, 86' Specialized Rock Hopper, 88' Centurion Iron Man, 89' Bruce Gordon "Hikari", 95' Rock Hopper Ultra.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Hmmm my 81 Woodrup Giro-Tour has a High bb too? 700c Brings it down, thinking
About a 650b conversion. Back to the op's question, most British framesets I have seen had a fairly long brake reach for tubulars (700c) , seemed to be the norm?
Cheers,
Chris
About a 650b conversion. Back to the op's question, most British framesets I have seen had a fairly long brake reach for tubulars (700c) , seemed to be the norm?
Cheers,
Chris
#6
Senior Member
Join Date: Feb 2008
Posts: 1,092
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
What size is yours? I wonder if only the larger sizes had the issue?
#7
Senior Member
Join Date: Jul 2008
Location: Nampa Idaho
Posts: 1,081
Bikes: 76' Centrurion Pro-Tour, 86' Specialized Rock Hopper, 88' Centurion Iron Man, 89' Bruce Gordon "Hikari", 95' Rock Hopper Ultra.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Yeah, not sure why Woodrup did that. It's about the only significant issue I have with the frameset. Maybe they thought owners would race them in crits. in the USA, with long cranks, so they gave the frames lots of cornering clearance? I dunno....
What size is yours? I wonder if only the larger sizes had the issue?
What size is yours? I wonder if only the larger sizes had the issue?
Cheers,
Chris
#8
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,866
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1854 Post(s)
Liked 661 Times
in
504 Posts
#9
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,866
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1854 Post(s)
Liked 661 Times
in
504 Posts
I also recall reading in a Classic Rendezvous posting that many Woodrups of the day were imported by Ten Speed Drive, who specified their builds as being tight and with rather larger trail than the bike I had.
I've been thinking about a 650b, and I think the high BB of that gold Woodrup makes it a near-perfect candidate. What you have to look at is whether you can get caliper brakes that are long enough to reach the brake tracks with 650b rims. I used a brake with 57 mm reach with 700c wheels, and the brake pads had to be placed at the ends of the slots - max reach position - for 700c wheels.
#10
Full Member
Thread Starter
Join Date: Nov 2010
Posts: 223
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 23 Times
in
6 Posts
Here's the bike I was asking about in the OP. Pretty nice eh? I was the high bidder for a while but I think it'll probably go out of my price range. (And I'm even going to be driving through that area on Saturday so I could pick it up.)
https://www.ebay.com/itm/290658488046...84.m1431.l2649
https://www.ebay.com/itm/290658488046...84.m1431.l2649
#11
Senior Member
Join Date: Jul 2011
Location: Ohio
Posts: 740
Bikes: 1973 Mercian Pro, 1972-73 Peugeot Track, 1983 Lotus Competition, Early 1970s Bottecchia Pro/Giro, 2000 Bob Jackson Special Tourist, 2011 Rivendell A. Homer Hilsen; 1996 Franklin custom
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
My '73 Mercian Pro has 120 dropouts, was built for tubulars, but of course 700c clinchers fit fine. I'm not sure whether there was any significant overlap between the eclipse of 120 spacing and the advent of 700c clinchers. Even if there was, it doesn't mean a Brit 120 spaced frame was "built for" 700c clinchers--it just happens to fit them.
#12
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,748 Times
in
937 Posts
This Torpado Five Speed came fitted with a five cog freewheel, 120mm drops and 700c steel clincher rims...
And, so did this Torpado Luxe Ten Speed...
I am not sure about the vintage of either bicycle, but early to mid seventies seems probable.
And, so did this Torpado Luxe Ten Speed...
I am not sure about the vintage of either bicycle, but early to mid seventies seems probable.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#14
Senior Member
Join Date: Dec 2005
Location: Ashland, VA
Posts: 4,420
Bikes: The keepers: 1958 Raleigh Lenton Grand Prix, 1968 Ranger, 1969 Magneet Sprint, 1971 Gitane Tour de France, 1973 Raleigh Tourist, 3 - 1986 Rossins, and a '77 PX-10 frame in process.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 237 Times
in
129 Posts
Just looking at the aesthetics, I'd be guessing mid-60's if not a bit earlier.
__________________
Syke
“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”
H.L. Mencken, (1926)
Syke
“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”
H.L. Mencken, (1926)
#15
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,866
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1854 Post(s)
Liked 661 Times
in
504 Posts
Here's the bike I was asking about in the OP. Pretty nice eh? I was the high bidder for a while but I think it'll probably go out of my price range. (And I'm even going to be driving through that area on Saturday so I could pick it up.)
https://www.ebay.com/itm/290658488046...84.m1431.l2649
https://www.ebay.com/itm/290658488046...84.m1431.l2649
Wow!