Tool for cutting Delta brake cable...
#1
Junior Member
Thread Starter
Tool for cutting Delta brake cable...
I have just a tiny bit of cable still coming out from underneath the Delta brake cover as my wire cutters were too thick, how do I get rid of that last bit? Cable fraying would not be a concern as the brakes are now properly set.
#2
Disciple of St. Tullio
Join Date: Jul 2008
Location: State of Jefferson
Posts: 746
Bikes: Ciöcc, Bianchi, DeRosa, Eddy Merckx, Frejus, Hampsten, Kondor, Losa, Magni, Pegoretti, Pelizzoli, Pogliaghi, Scapin
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 268 Post(s)
Liked 338 Times
in
141 Posts
A dremel with a cut off wheel. You can probably use a set of needle nose pliers to hold the end while you cut.
When I put cables on Deltas, the very last thing I do is cut the cable. I run it through and down by the tire, get everything adjusted like I want and then cut the cable with the dremel.
When I put cables on Deltas, the very last thing I do is cut the cable. I run it through and down by the tire, get everything adjusted like I want and then cut the cable with the dremel.
Likes For Choke: