Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

Realistic weight of commuter

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

Realistic weight of commuter

Old 05-23-14, 07:09 AM
  #1  
NOS88
Senior Member
Thread Starter
 
NOS88's Avatar
 
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times in 2 Posts
Realistic weight of commuter

I've been on the sidelines of a debate between three friends about realistic weights for a commuter rig. While I'm not especially concerned about the weight of my rig, I am curious about which of my three friends is the closest to being on target. So, you feedback and thoughts are appreciated. Here's the rig's requirements. It must have a long enough wheelbase and/or front fork rake to be stable with a handlebar bag, it must have full mudguards, it must have a rear rack, and it must have gearing appropriate to climb a one mile hill with average grade of 9% and short spans with 17-19% grade (These climbing requirements were picked because they represent a route all four of us use and know well.) And the rig must be capable of carrying at least 225 lbs. inclusive or rider and cargo.

Friend number one argues that you'd be looking at 34 or 35 lbs. at least.
Friend number two says you can do it for under 30 lbs.
And, friend number three says you should be able to do it for under 25 lbs.

All of these include pedals but no bags, tools, etc.

So, what are your thoughts and how might you achieve the weight you suggest? I'm inclined to think that somewhere around 30 lbs. is the most realistic figure.

Please keep in mind that this is really just an opportunity for friends to disagree about something and entertain ourselves via debate. For example, we've argued over racks and have finally all agreed that a Tubus titanium rack would be a good choice. We don't however, agree on frame material, wheels, components, etc.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
NOS88 is offline  
Old 05-23-14, 07:44 AM
  #2  
WalksOn2Wheels
Vain, But Lacking Talent
 
WalksOn2Wheels's Avatar
 
Join Date: Aug 2009
Location: Denton, TX
Posts: 5,510

Bikes: Trek Domane 5.9 DA 9000, Trek Crockett Pink Frosting w/105 5700

Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 1525 Post(s)
Liked 81 Times in 42 Posts
I'll bite, simply because I built my commuter and was surprised that it didn't weigh that much. I started with an aluminum cross bike, a Cannondale CAADX with a 105 build, so off the bat it has the ability to mount fenders and decently wide tires. The geometry is such that it has a longer wheelbase than racier road bikes. It's stable enough that I accidentally learned how to ride without hands. Lame I know, but I never tried it until it suddenly happened while riding up an incline.

I'm not a fan of racks, so I don't have one, but it looks like the rack you mentioned would weigh no more than a pound.

The stock gearing is a 36/46 front with a 12-27 cassette in the back. If you put on a long cage derailleur, you could get something like a 32 on the rear if needed.

Anyhow, with aluminum fenders, a front dynamo hub and front and rear lights, my bike only came in at 23.5 pounds. So yeah, you could probably get at or under 25 pretty easy if you're not including a lighting system. If you were determined to go steel, you would probably need to focus on something like a Reynolds frame to stay in that weight category. Giving yourself room to go to 30 pounds would make it even easier.
WalksOn2Wheels is offline  
Old 05-23-14, 07:52 AM
  #3  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,431

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5885 Post(s)
Liked 3,468 Times in 2,078 Posts
Since pretty much any kind of bike can be pressed into service as a commuter, weights are going to be all over the place.

Still the classic commuters are portly. I'm thinking about the European three speeds with fully enclosed chain guards. Those are the gold medal standard for commuters in many ways. Three speed hubs are pretty bombproof and seldom need adjustment. The fully enclosed chain guard is a drag when fixing a flat (in fact you'll want to repair the tube on the wheel rather than remove one of those things) but they are great for keeping pants legs clean and keeping the chain clean as well in all kinds of weather. They have generator lights, a super strong rack, and usu. a built in lock. I'll bet those bikes weigh upwards of 40 lbs.

Americans are pretty eclectic as to the kinds of bikes that get pressed into service for commuting. Still if you are looking for a bike that can take a reasonably stout tire, racks, fenders, etc., 30 lbs give or take a few lbs is probably a pretty reasonable weight. I currently have two vintage bikes I've set up as commuters: a 1993 Bridgestone BB-1 and a 1988 Specialized Stumpjumper Comp that I converted to drop bars and bar ends for commuting. The Stumpy has double butted Tange tubing; the Bridgestone is plain gauge Tange tubing. They both weigh the same with leather saddles, stout tires, racks, fenders, etc. at 32 lbs. Both bikes were CL finds and cheap; recycling an old bike as a commuter is a fun project. They both soak up bumps beautifully:

Attached Images
File Type: jpg
P1010986.jpg (103.8 KB, 67 views)
File Type: jpg
IMG_0065.jpg (97.1 KB, 71 views)

Last edited by bikemig; 05-23-14 at 07:57 AM.
bikemig is offline  
Old 05-23-14, 07:59 AM
  #4  
DogBoy
No one carries the DogBoy
 
Join Date: Feb 2004
Location: Upper Midwest USA
Posts: 2,320

Bikes: Roubaix Expert Di2, Jamis Renegade, Surly Disc Trucker, Cervelo P2, CoMotion Tandem

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 2 Times in 2 Posts
I have a Disc Trucker that meets all those requirements. With racks and empty bags on it, its like 33 lbs. I could take the front rack off and that would save me about a pound, but when I put the studded tires on its going to cost me a couple of pounds. A DT is probably one of the beefiest, heaviest frames out there, and I built it up with heavy duty wheels and sturdy racks. Based on that I'd say you should easily be able to find something that will come in under 30.
DogBoy is offline  
Old 05-23-14, 08:06 AM
  #5  
jeffpoulin
Senior Member
 
Join Date: Jul 2008
Posts: 2,296
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Liked 11 Times in 7 Posts
My commuters are all basic touring bikes with racks, fenders, triple cranksets, and sturdy wheels. They weigh 26 to 29 pounds without bags. Under 30 is realistic. Under 25 is doable with higher end bikes/components or by foregoing racks and fenders.

For reference, my fenders (SKS longboards) weigh 600g and my rear rack weighs 800g, so that's 1.4kg (3 pounds) I could save if I used a backpack and didn't mind getting grimy. My 36-spoke touring wheels with tubes & tires come in at a whopping 9 pounds for the set. Obviously, I could save a lot of weight there if I went with higher end wheels. OTOH, I've only had 2 commuting flats in the last 10 years, so there's something to be said for beefier wheels and tires.
jeffpoulin is offline  
Old 05-23-14, 09:00 AM
  #6  
MichaelW
Senior Member
 
Join Date: Feb 2001
Location: England
Posts: 12,948
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 19 Post(s)
Likes: 0
Liked 7 Times in 7 Posts
A light-touring bike with a triple weighs in a 18-19lbs. Add racks, lights, lock, etc. and you should be under the 25lbs bar. A full-on touring bike will add a couple of pounds.
MichaelW is offline  
Old 05-23-14, 09:12 AM
  #7  
The Hansenator
Senior Member
 
Join Date: Mar 2014
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 0 Times in 0 Posts
Based on my experience, 25-30 pounds seems about right for a commuter. As others have said, you can commute on most anything so it can be more or less than that.
The Hansenator is offline  
Old 05-23-14, 09:18 AM
  #8  
wphamilton
Senior Member
 
wphamilton's Avatar
 
Join Date: Apr 2011
Location: Alpharetta, GA
Posts: 15,280

Bikes: Nashbar Road

Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 2934 Post(s)
Liked 341 Times in 228 Posts
Originally Posted by NOS88
I've been on the sidelines of a debate between three friends about realistic weights for a commuter rig. While I'm not especially concerned about the weight of my rig, I am curious about which of my three friends is the closest to being on target. So, you feedback and thoughts are appreciated. Here's the rig's requirements. It must have a long enough wheelbase and/or front fork rake to be stable with a handlebar bag, it must have full mudguards, it must have a rear rack, and it must have gearing appropriate to climb a one mile hill with average grade of 9% and short spans with 17-19% grade (These climbing requirements were picked because they represent a route all four of us use and know well.) And the rig must be capable of carrying at least 225 lbs. inclusive or rider and cargo.

Friend number one argues that you'd be looking at 34 or 35 lbs. at least.
Friend number two says you can do it for under 30 lbs.
And, friend number three says you should be able to do it for under 25 lbs.

All of these include pedals but no bags, tools, etc.

So, what are your thoughts and how might you achieve the weight you suggest? I'm inclined to think that somewhere around 30 lbs. is the most realistic figure.

Please keep in mind that this is really just an opportunity for friends to disagree about something and entertain ourselves via debate. For example, we've argued over racks and have finally all agreed that a Tubus titanium rack would be a good choice. We don't however, agree on frame material, wheels, components, etc.
I'm with friend number three long as you're OK with starting with a road bike or cross bike. Number one is definitely wrong because a lot of people do it under 30 pounds - you almost have to add a lot of extra accouterments to get over 34 pounds or start with an exceptionally heavy bike to begin with.

It's more a matter of style and preference than it is "have to." It's all good - I've commuted with a 38 pounder all told, but my regular commuting bike right now is about 22 pounds (no rack, not counting light and tools) and I haven't particularly striven to make it light.
wphamilton is offline  
Old 05-23-14, 09:25 AM
  #9  
jrickards
Senior Member
 
jrickards's Avatar
 
Join Date: Jul 2011
Location: Sudbury, ON, CA
Posts: 2,647

Bikes: 2012 Kona Sutra, 2002 Look AL 384, 2018 Moose Fat bike

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 133 Post(s)
Liked 6 Times in 5 Posts
My fully loaded 29er (~$1,000) with everything on it that I need to carry to bring in to work (except for me) is about 45lbs and I will ride it like that in the summer from work on a Friday to the cottage (30km on a hilly 2-lane highway then 28km on a hilly dirt road).
jrickards is offline  
Old 05-23-14, 09:26 AM
  #10  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,355 Times in 862 Posts
I'm about 13 stone.
fietsbob is offline  
Old 05-23-14, 09:28 AM
  #11  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,431

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5885 Post(s)
Liked 3,468 Times in 2,078 Posts
Originally Posted by fietsbob
I'm about 13 stone.
Is that sans bike?
bikemig is offline  
Old 05-23-14, 09:28 AM
  #12  
BobbyG
Senior Member
 
BobbyG's Avatar
 
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,968

Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1362 Post(s)
Liked 1,669 Times in 825 Posts
My first commuter A Schwinn Cruizer from 1987 wound up being 48lbs. My current Nishiki Blazer with fenders and rack ~33lbs. My Nishiki International Road Bike with no fenders or rack, but horn, lights and saddlebag ~25lbs. Since my main reason to ride is fitness, I don't mind the extra weight, as long as it's not my actual body weight.
BobbyG is offline  
Old 05-23-14, 09:34 AM
  #13  
jrickards
Senior Member
 
jrickards's Avatar
 
Join Date: Jul 2011
Location: Sudbury, ON, CA
Posts: 2,647

Bikes: 2012 Kona Sutra, 2002 Look AL 384, 2018 Moose Fat bike

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 133 Post(s)
Liked 6 Times in 5 Posts
Originally Posted by BobbyG
Since my main reason to ride is fitness, I don't mind the extra weight, as long as it's not my actual body weight.
+1
jrickards is offline  
Old 05-23-14, 09:36 AM
  #14  
modernjess
ride for a change
 
modernjess's Avatar
 
Join Date: Nov 2006
Location: Minneapolis, MN
Posts: 2,221

Bikes: Surly Cross-check & Moonlander, Pivot Mach 429, Ted Wojcik Sof-Trac, Ridley Orion. Santa Cruz Stigmata

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time in 1 Post
Im not sure I understand what the "realistic" weight for a bike means. Without a budget threshold or an off the shelf limiter it is possible to achieve pretty much anything you want if you point the money bazooka at it and shoot long enough.
modernjess is offline  
Old 05-23-14, 09:40 AM
  #15  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,446

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
There's another thread here with commuter bike weights. Go through it and tally the data. I'm sure you could start with a nice frame and build it with light and/or simple components and get it into the mid twenties. The average decent mountain bike is going to ring up in the mid thirties.
Darth Lefty is offline  
Old 05-23-14, 09:49 AM
  #16  
jyl
Senior Member
 
jyl's Avatar
 
Join Date: Aug 2006
Location: Portland OR
Posts: 7,639

Bikes: 61 Bianchi Specialissima 71 Peugeot G50 7? P'geot PX10 74 Raleigh GranSport 75 P'geot UO8 78? Raleigh Team Pro 82 P'geot PSV 86 P'geot PX 91 Bridgestone MB0 92 B'stone XO1 97 Rans VRex 92 Cannondale R1000 94 B'stone MB5 97 Vitus 997

Mentioned: 146 Post(s)
Tagged: 0 Thread(s)
Quoted: 392 Post(s)
Likes: 0
Liked 49 Times in 31 Posts
My commute bike is an early 80's steel race road bike which was reasonably light for the time - around 22 lb in 58 cm with clincher rims.

Add metal fenders (I like PDW's Full Metal Fenders), NiteRider headlight and a big-ish battery, tailights and various blinkies, small Carradice saddlebag and support (weight similar to a light rack and a single light pannier, if you prefer those), a spare tube and a small bag of tools, frame pump, 4 lb Kryptonite U-lock, full water bottle - the bike as I ride it is about 35 lbs. If you don't count the lock, lights, and water, call it 28 lb or so.

No question the weight makes the commute bike sluggish. When I ride my "weekend bike" (about 18-19 lb) on the same road, I go notably faster with less effort.

However, all that stuff is necessary for year-round commuting in rain, night, etc. The stuff I carry to/from work weighs 15+ lb anyway. And the work is good for me.
jyl is offline  
Old 05-23-14, 09:49 AM
  #17  
tsl
Plays in traffic
 
tsl's Avatar
 
Join Date: May 2006
Location: Rochester, NY
Posts: 6,971

Bikes: 1996 Litespeed Classic, 2006 Trek Portland, 2013 Ribble Winter/Audax, 2016 Giant Talon 4

Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Likes: 0
Liked 14 Times in 9 Posts
I agree with those who say the variety dictated by personal preferance will put weights all over the place. If you're starting with road, touring, MTB, or a "city" bike, the base platform alone makes a huge difference.

I'm also of the opinion that "commuter" is not an adjective. It does not describe how something looks, or is equipped. It's a verb. It describes what something does or how it is used. So if you commute on it, it's a commuter bike.

I was passed earlier this week by a guy commuting on a Specialized Venge Aero TT bike. The backpack gave him away as a commuter. As I understand it, those bikes come in under 15 pounds.

I commute regularly on my Litespeed. It's under 20 pounds. In fact, I was commuting home on the Litespeed when we were passed by the Venge. The Litespeed does gain some weight during EST and a few weeks before and after, when I have to add a Magicshine and battery pack to it.

When weather or load carrying needs dictate, I use one of my two "commuter" bikes. One is just shy of 25 pounds, the other just shy of 30. If you use "commuter" as an adjective, then IMHO, rack, fenders and dynamo lighting systems are requirements. Dyno hubs add a pound by themselves.
tsl is offline  
Old 05-23-14, 10:07 AM
  #18  
NOS88
Senior Member
Thread Starter
 
NOS88's Avatar
 
Join Date: Mar 2006
Location: Montgomery County, Pennsylvania
Posts: 6,489
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 6 Times in 2 Posts
Originally Posted by Darth Lefty
There's another thread here with commuter bike weights. Go through it and tally the data. I'm sure you could start with a nice frame and build it with light and/or simple components and get it into the mid twenties. The average decent mountain bike is going to ring up in the mid thirties.
Thanks for the link. I checked it out. I only included those bikes that met the criteria identified in my original post as determined by photograph or text. Anything that was questionable was not included. Drum roll please..... the average weight was 35.1875 lbs.
__________________
A conclusion is the place where you got tired of thinking. - S. Wright
Favorite rides in the stable: Indy Fab CJ Ti - Colnago MXL - S-Works Roubaix - Habanero Team Issue - Jamis Eclipse carbon/831
NOS88 is offline  
Old 05-23-14, 10:08 AM
  #19  
joeyduck
Senior Member
 
joeyduck's Avatar
 
Join Date: Apr 2010
Location: Nanaimo, BC
Posts: 2,014

Bikes: 1997 Kona Hahana Race Light, 2010 Surly LHT(deceased), 1999 Rocky Mountain Turbo

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Full fendered with Soma Fab chromoplastic fenders, top peak rear rack, tubus (I think) front rack. Two bottle cages, hand pump, lights, basic tools and flat repair kit, lights, computer, stock set-up (except Tiagra STI), 700 by 32 Marathons, pedals and child seat mount and my Surly LHT weighs in between 34-35 pounds.

I like the steel, it is sturdy. I never worry about over loading it, and it feels great.

I have never tried a handle bar bag, but have been considering it. But with the front panniers it handles fine. I figure all daily supplies weigh about 15 more pounds (pannier included), I weigh between 185-195 pounds. My son is about 35 pounds (his kit about anothe 10 pounds). I have no idea how much his seat weighs. Anywhere from 5-12 pounds is my guess (never weighed it). So regular commute with bike we weigh in near 285 pounds.

Handles great, climbs well, descends even better! Yeah gravity! I figure with my base weight at 285 a 10 pound frame weight savings is only 3.5%. Then with another frame I may not feel as comfortable loading it with all I do. Plus I figure when I get a "light weight" bike I will crush hills.
joeyduck is offline  
Old 05-23-14, 10:18 AM
  #20  
joeyduck
Senior Member
 
joeyduck's Avatar
 
Join Date: Apr 2010
Location: Nanaimo, BC
Posts: 2,014

Bikes: 1997 Kona Hahana Race Light, 2010 Surly LHT(deceased), 1999 Rocky Mountain Turbo

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Originally Posted by NOS88
the average weight was 35.1875 lbs.
Yeah I am below average in something!
joeyduck is offline  
Old 05-23-14, 10:21 AM
  #21  
Steely Dan
born again cyclist
 
Steely Dan's Avatar
 
Join Date: Jun 2010
Location: Chicago
Posts: 2,402

Bikes: I have five of brikes

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 201 Post(s)
Liked 78 Times in 31 Posts
as others have said, you can commute on any kind of bike, hell i've even seen a guy commuting on a unicycle and that was well below 25 pounds.

i have a titanium road bike that i commute on when the weather allows and it's around 18 pounds naked, almost 20 pounds with commuting stuff like lights and water bottle/cage (i keep things pretty bare-bones on the bike because i'm a backpack commuter).

i also have a disc brake/IGH fully-fendered hybrid for commuting in foul weather that's ~29 pounds when kitted out with stuff. i'm thinking of replacing it with a titanium disc brake CX bike to get the weight down a little bit.

as for the OP's requirements for racks and front bags and other such carrying equipemnt, i think you could easily rig up a titanium or carbon CX bike with fenders, lights, and a rear rack for less than 25 pounds.

Last edited by Steely Dan; 05-23-14 at 10:27 AM.
Steely Dan is offline  
Old 05-23-14, 10:26 AM
  #22  
Chr0m0ly 
Senior Member
 
Chr0m0ly's Avatar
 
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,609

Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 684 Post(s)
Liked 370 Times in 219 Posts
Its like A.J. the carpenter told my mom anytime she wanted to change something during the kitchen renovation.
"Nancy, you can have ANY THING you want. As long as you pay for it."
Chr0m0ly is offline  
Old 05-23-14, 11:17 AM
  #23  
The Hansenator
Senior Member
 
Join Date: Mar 2014
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 0 Times in 0 Posts
Originally Posted by modernjess
Im not sure I understand what the "realistic" weight for a bike means. Without a budget threshold or an off the shelf limiter it is possible to achieve pretty much anything you want if you point the money bazooka at it and shoot long enough.
I would think that refers to what would be considered average for a bike that's used for commuting; Maybe a mid priced bike with fenders, rack, water bottle, lock, and lights.
The Hansenator is offline  
Old 05-23-14, 11:27 AM
  #24  
andyprough
Senior Member
 
andyprough's Avatar
 
Join Date: Apr 2014
Location: Austin, TX
Posts: 284

Bikes: Motobecane

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
I've always been of the opinion that the 190 pounds I put on top of the bike slows me down far more than the 25-35 pounds of total bike weight.

I know, I know - Call me crazy...
andyprough is offline  
Old 05-23-14, 11:59 AM
  #25  
mconlonx
Senior Member
 
mconlonx's Avatar
 
Join Date: Jun 2007
Posts: 7,558
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 7148 Post(s)
Liked 134 Times in 92 Posts
All my commuters seem to end up weighing in the 28-32lb range. Folder, uber commuter with dyno-lights fenders rack, or mtn conversion running 2.50 Hookworms.
mconlonx is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.