Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Replacing & Tensioning Spokes on Tour

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Replacing & Tensioning Spokes on Tour

Old 07-04-19, 10:38 AM
  #1  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Replacing & Tensioning Spokes on Tour

Hi folks. Just wondering how to properly tension a replaced spoke while on tour.

I have a cyclocross bike that was repurposed by MEC (mec.ca) as a touring bike. Love the thing. Anyway, it has disc brakes, which means braking tension for my tank is put upon the hub, not the rim. So rim gets yanked on when braking, which turns into high tension on spokes, and hence breaking of said spokes.

At least that's my theory.

I have to replace broken spokes on the run, when I have time. I don't have enough space for any tension tester of any size (the tank is heavy enough without specialized tools), so I was thinking someone might know how to test the spoke tensions while on the run.

Also, how to best optimize spokes while on the run, as I want to avoid the odd tight or loose spoke so I don't get any breaking at all. This is a tough one as I know little about wheels.

Cheers. Enjoy the pics.

My fix-it kit, on a ferry from St. Malo, France, to Portsmouth, England.


The path from Bordeaux to Carcans and the west coast of France. Nice playground.


MEC 2011 Cote touring bike. It's an aluminum cyclocross bike with braze-ons. I replaced the handlebars with proper touring round bars. Also replaced toe clips.


The small number of spokes I've had break on me, did so at the nipple here. Smells like a tension problem.
BeeRich is offline  
Old 07-04-19, 11:03 AM
  #2  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,251

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 149 Post(s)
Tagged: 1 Thread(s)
Quoted: 6133 Post(s)
Liked 4,067 Times in 2,310 Posts
First, if your spokes are breaking at the nipple, the problem is that the spokes are too short. I’ve been seeing this problem on a number of bikes with OEM wheels, especially if the wheels have aluminum nipples. They aren’t making the wheels with the proper spoke length so the threads aren’t buried in the nipple. They only go down about 1/2 way. That stresses the spoke at the nipple and makes it prone to breakage. Adjusting the tension won’t fix anything. The only thing to fix the problem is to rebuild the wheel with the proper spokes.

As for tensioning a replacement spoke, learn how to do it by ear or by feel. If the spoke is feels like it is about the same tension as the spoke around it (and the wheel is true), the tension is close enough. You can also hit spokes around the replacement...a spoke wrench makes a handy mallet...and listen to the sound. If it doesn’t sound the same, tighten or loosen to get the same tone.

Tension meters are good and all but you carry a pretty good one around with you all the time.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is online now  
Likes For cyccommute:
Old 07-04-19, 11:14 AM
  #3  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Wow that's probably the last thing I would want to be hearing. Heh. Is thing something I could do on my own? Is this recommended? So many questions. If I had the right tensioner and knew what size spokes I should have, is this something I should undertake? I'm guessing doing these one by one is the approach.

I guess my first question is how do I know how to measure proper spoke lengths?

Cheers
BeeRich is offline  
Old 07-04-19, 11:37 AM
  #4  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,911

Bikes: Several, mostly not name brands.

Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3556 Post(s)
Liked 3,332 Times in 1,899 Posts
Originally Posted by BeeRich
I guess my first question is how do I know how to measure proper spoke lengths?
The easy way is to use one of the on-line spoke length calculators, or download the spocalc.xls spreadsheet, find your hub and rim in the database, decide on a cross pattern, and let the software do the math.

Failing that, a little algebra and trigonometry and a few measurements to plug into the formula:


Source: Sutherland's 4th Edition
JohnDThompson is offline  
Old 07-04-19, 11:47 AM
  #5  
Bill Kapaun
Really Old Senior Member
 
Bill Kapaun's Avatar
 
Join Date: Feb 2007
Location: Mid Willamette Valley, Orygun
Posts: 13,795

Bikes: 87 RockHopper,2008 Specialized Globe. Both upgraded to 9 speeds.

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1763 Post(s)
Liked 1,218 Times in 842 Posts
IF replacing ONE spoke, you's simply bring the tension up to get the wheel true again.
That assumes it was true before you broke the spoke.

If you are constantly breaking spokes, they are at the end of their life. ALL the old spokes have the same number of fatigue cycles.
Bill Kapaun is online now  
Old 07-04-19, 11:48 AM
  #6  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Oh screw that. LOL. Is that in metric? There are no units.
BeeRich is offline  
Old 07-04-19, 11:49 AM
  #7  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Ya one spoke at a time.
BeeRich is offline  
Old 07-04-19, 12:02 PM
  #8  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,091 Times in 722 Posts
Originally Posted by BeeRich
Oh screw that. LOL. Is that in metric? There are no units.
Units? Trig don't need no steeking units!
dsbrantjr is offline  
Old 07-04-19, 12:03 PM
  #9  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Hub width does.
BeeRich is offline  
Old 07-04-19, 12:05 PM
  #10  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Ah I guess if all measurements are same units...I quickly skimmed over the formula. Ya I might talk to a local wheel builder about doing this.
BeeRich is offline  
Old 07-04-19, 12:07 PM
  #11  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,091 Times in 722 Posts
Originally Posted by cyccommute
First, if your spokes are breaking at the nipple, the problem is that the spokes are too short. I’ve been seeing this problem on a number of bikes with OEM wheels, especially if the wheels have aluminum nipples. They aren’t making the wheels with the proper spoke length so the threads aren’t buried in the nipple. They only go down about 1/2 way. That stresses the spoke at the nipple and makes it prone to breakage. Adjusting the tension won’t fix anything. The only thing to fix the problem is to rebuild the wheel with the proper spokes.
Yes, the thread valleys make nice stress risers. The threads are rolled into the spokes and I'll bet they have all broken right at the point where the first thread reaches full depth
dsbrantjr is offline  
Old 07-04-19, 12:16 PM
  #12  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
They all seemed to break right at the nipple, as per the images in the OP.
BeeRich is offline  
Old 07-04-19, 12:41 PM
  #13  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,598

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,354 Times in 861 Posts
My Touring bike build, I built a 48 spoke rear and a 40 spoke front, 10 years 3 long tours , only 1 spoke spare needed..

I just bought 2 more spokes in the 3 lengths of the wheels built..

If they break at the nipple they may be too short ( head un supported by the spoke in the center )





....
fietsbob is offline  
Old 07-04-19, 12:58 PM
  #14  
2old
Senior Member
 
Join Date: Jul 2014
Location: socal
Posts: 4,213
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 871 Post(s)
Liked 792 Times in 600 Posts
Ear, feel, and most important (for me) straight wheel.
2old is offline  
Old 07-04-19, 01:04 PM
  #15  
berner
Senior Member
 
Join Date: May 2010
Location: Bristol, R. I.
Posts: 4,340

Bikes: Specialized Secteur, old Peugeot

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 663 Post(s)
Liked 496 Times in 299 Posts
The gentlemen posting above offer good advice. Regarding spoke tension read up on tuning by ear in an article from Harris Cyclery. There is a wealth of knowledge at the website so it is worth while spending time there and reading up on subjects of interest. I tune by ear with very good results. With a bit of practice, perhaps even using a pitch pipe if no other spokes present for comparison you will will get good results also. https://www.sheldonbrown.com/spoke-pitch.html Mr. Brown built a well regarded website for cyclists. He is no longer riding with us and is missed even by those who never met him.
berner is offline  
Old 07-04-19, 01:19 PM
  #16  
CliffordK
Senior Member
 
CliffordK's Avatar
 
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,600
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18302 Post(s)
Liked 4,470 Times in 3,326 Posts
I think it depends a bit on how long your tour is.

I'm generally not out for more than a week or so so at a time.

I've done roadside spoke replacement, or even trued a wheel one spoke short in a pinch.

Finish the ride, then deal with the big issues when one gets back home. Truing a 36 spoke wheel with 35 spokes was easy enough, but a major hassle to get back to normal.

It is easy enough to true the wheel on the bike.

I don't know, if you're out for more than a week. I suppose if one had a layover day, one could do a complete teardown and rebuild.
CliffordK is offline  
Old 07-04-19, 01:27 PM
  #17  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Hah ya I don't doubt it. I just didn't want this to turn into a wheel rebuild. I current tune by ear, as that's all I got on the road. I've been on Sheldon's site many times before. Thanks for the post.
BeeRich is offline  
Old 07-04-19, 01:28 PM
  #18  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Tour can be up to 75 days. Truing is one thing, but then I'm nervous about the weight and load on a rim missing a single (or two) spokes. I've never done a rebuild and I wouldn't want to do that on a tour. At least not now.
BeeRich is offline  
Old 07-04-19, 01:30 PM
  #19  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
Just in case someone's interested, these are from my notes:
  • Left (front & rear): 15G*292L (1.8mm)
  • Right (front & rear): 15G*290L (1.8mm)
  • DT Champion Stainless Black (brass nipples)
BeeRich is offline  
Old 07-04-19, 04:00 PM
  #20  
headasunder
Full Member
 
Join Date: Jul 2015
Posts: 360
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 74 Post(s)
Liked 19 Times in 14 Posts
Originally Posted by BeeRich
Just in case someone's interested, these are from my notes:
  • Left (front & rear): 15G*292L (1.8mm)
  • Right (front & rear): 15G*290L (1.8mm)
  • DT Champion Stainless Black (brass nipples)
Save your self the pain and get the wheels rebuilt with double or triple butted spokes for a 2/3 month loaded tour your rig is too light weight + broken spokes are a pain on a loaded rig when you are miles from anywhere and as you have found out once one goes another will follow its just the when you don't know.
headasunder is offline  
Likes For headasunder:
Old 07-04-19, 04:04 PM
  #21  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
OK, sounds good. You recommend 2.0mm spokes plus triple butted?
BeeRich is offline  
Old 07-04-19, 05:34 PM
  #22  
Gresp15C
Senior Member
 
Gresp15C's Avatar
 
Join Date: Sep 2014
Posts: 3,893
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1062 Post(s)
Liked 665 Times in 421 Posts
Originally Posted by BeeRich
Oh screw that. LOL. Is that in metric? There are no units.
It can be in any units, so long as you use the same units for each symbol. For instance, measure everything in mm, and your spoke lengths will come out in mm.

I've used this formula with success for building wheels.
Gresp15C is offline  
Old 07-04-19, 05:52 PM
  #23  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,660
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 171 Times in 138 Posts
Originally Posted by Bill Kapaun
IF replacing ONE spoke, you's simply bring the tension up to get the wheel true again.
That assumes it was true before you broke the spoke.

If you are constantly breaking spokes, they are at the end of their life. ALL the old spokes have the same number of fatigue cycles.
Spokes that are tensioned properly can last through many rims.
davidad is offline  
Old 07-04-19, 05:54 PM
  #24  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,660
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 582 Post(s)
Liked 171 Times in 138 Posts
This is a sign that the tension was too low. I would go with double butted spokes to minimize any problems.
Are you running 32 or 36 spokes? 36 is the minimum for a loaded tourer.
davidad is offline  
Old 07-04-19, 06:12 PM
  #25  
BeeRich
Junior Member
Thread Starter
 
BeeRich's Avatar
 
Join Date: May 2012
Location: Toronto, Canada
Posts: 150

Bikes: MEC Côte, Ironhorse MT700R, a Spinner, Nishiki Continental

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 47 Post(s)
Liked 11 Times in 8 Posts
I don't know. I just bought the bike as it was sold as a touring bike. It's upside down in my garage. I will have to think about all this.
BeeRich is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.