The Age 40+ Singlespeed & Fixed Gear Thread
#1001
Tinker-er
Join Date: Oct 2007
Location: Mid-Atlantic
Posts: 450
Bikes: 1956 Rudge Sports; 1983 Univega Alpina Uno; 1981 Miyata 610; 1973 Raleigh Twenty; 1994 Breezer Lightning XTR; V4 Yuba Mundo aka "The Schlepper"; 1987 Raleigh "The Edge" Mountain Trials; 1952 R.O. Harrison "Madison"
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 165 Post(s)
Liked 267 Times
in
183 Posts
Last night a couple 19 tooth 1/8" track cogs arrived in the mail. I went downstairs, stuck the Rudge Clubman in the stand, took off the rear wheel and mounted the cog, snugged it down, then the lockring.
I took a ~14 mile ride this evening on the Clubman as a fixed gear.
Lately I have been having these moments of near-childish joy from riding, or grabbing my Pentax MX with 50mm lens, or picking up a live cicada. It was a blast to ride the Clubman as a fixed gear. I haven't ridden a fixed gear for myself since 2009. This is actually the most I've ridden the Clubman, even more than with the 16/20 freewheel. It's like rediscovering a bit of the real fun of riding. This bike has me so connected; the gear ratio is good, the chain slack is just enough to allow smooth rotation, but also perfect for track standing. I did a good minute trackstand waiting for a traffic light to turn on my way to the Schuylkill path. It's just so much fun. My legs feel a little more like noodles than they usually do, but that's good. Knees don't hurt, everything feels good.
Here's a photo of the Rudge Clubman just before East Falls.
https://gallery.leica-users.org/d/545...031023Ride.JPG
I took a ~14 mile ride this evening on the Clubman as a fixed gear.
Lately I have been having these moments of near-childish joy from riding, or grabbing my Pentax MX with 50mm lens, or picking up a live cicada. It was a blast to ride the Clubman as a fixed gear. I haven't ridden a fixed gear for myself since 2009. This is actually the most I've ridden the Clubman, even more than with the 16/20 freewheel. It's like rediscovering a bit of the real fun of riding. This bike has me so connected; the gear ratio is good, the chain slack is just enough to allow smooth rotation, but also perfect for track standing. I did a good minute trackstand waiting for a traffic light to turn on my way to the Schuylkill path. It's just so much fun. My legs feel a little more like noodles than they usually do, but that's good. Knees don't hurt, everything feels good.
Here's a photo of the Rudge Clubman just before East Falls.
https://gallery.leica-users.org/d/545...031023Ride.JPG
#1002
Senior Member
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680
Bikes: Most of my bikes are Single Speed Conversions
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times
in
1,015 Posts
I’m 72 , my bike riding started when I was probably around 12 and I dragged home an old three speed “English” bike someone had thrown out in the trash.
I managed to get it to work as a single speed . I never owned a new bike until I was in my early thirties and bought a cheap department store bike , to ride with my daughter , but it didn’t last long and my interest changed.
In my mid fifties I bought an old Schwinn Heavy Duty at a yard sale and my love of riding regularly grew along with my love of single speeds .
I’ve gone back forth between single and geared bikes with my interest in single speeds taking over .
I just recently converted my Schwinn CrossCut and CrossCross , along with a Trek MultiTrack.
And my Specilized Hardrock .
Never tried FG but thought about it . I have a frame or two laying around and a couple of flip flop hubs , so who knows .
Is 72 too late to start FG ?
I managed to get it to work as a single speed . I never owned a new bike until I was in my early thirties and bought a cheap department store bike , to ride with my daughter , but it didn’t last long and my interest changed.
In my mid fifties I bought an old Schwinn Heavy Duty at a yard sale and my love of riding regularly grew along with my love of single speeds .
I’ve gone back forth between single and geared bikes with my interest in single speeds taking over .
I just recently converted my Schwinn CrossCut and CrossCross , along with a Trek MultiTrack.
And my Specilized Hardrock .
Never tried FG but thought about it . I have a frame or two laying around and a couple of flip flop hubs , so who knows .
Is 72 too late to start FG ?
Likes For OldCruiser:
#1003
Cheerfully low end
Join Date: Jun 2020
Posts: 1,978
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,044 Times
in
667 Posts
My first brief dabble with SS was in the ‘70s. I got a new Azuki “10 speed” in 1975, a 23” frame. In a a couple years it seemed small and I got a nicer 25” frame. I turned the Azuki into a single speed. I only used it on shorter, around town rides and eventually I gave it away.
I didn’t get back to single speed until about five years ago. Since then, I’ve had two bikes, a road frame and an MTB frame and both have been set up single speed for more than three of those years.
I’ve put gears back on briefly for two intervals, but riding an actual single speed just seems to make me happier.
One thing I’ve gone back and forth on is gearing. Lots of time as 42/16, but sometimes I switch to 42/17. I tend to prefer to push a little harder than some, but I started running regularly again a year ago. I seem to manage the overall load of cycling and running if I use the 42/17. Also, when the leaves drop, the wind is more of a challenge on windy rides and the lower 65 inch gear is easier to stay on top of.
Otto
I didn’t get back to single speed until about five years ago. Since then, I’ve had two bikes, a road frame and an MTB frame and both have been set up single speed for more than three of those years.
I’ve put gears back on briefly for two intervals, but riding an actual single speed just seems to make me happier.
One thing I’ve gone back and forth on is gearing. Lots of time as 42/16, but sometimes I switch to 42/17. I tend to prefer to push a little harder than some, but I started running regularly again a year ago. I seem to manage the overall load of cycling and running if I use the 42/17. Also, when the leaves drop, the wind is more of a challenge on windy rides and the lower 65 inch gear is easier to stay on top of.
Otto
#1004
Senior Member
Join Date: Oct 2008
Location: Portland, OR
Posts: 3,843
Bikes: Trek Domane SL6 Gen 3, Soma Fog Cutter, Focus Mares AL, Detroit Bikes Sparrow FG, Volae Team, Nimbus MUni
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 896 Post(s)
Liked 2,065 Times
in
1,081 Posts
I’m 72 , my bike riding started when I was probably around 12 and I dragged home an old three speed “English” bike someone had thrown out in the trash.
I managed to get it to work as a single speed . I never owned a new bike until I was in my early thirties and bought a cheap department store bike , to ride with my daughter , but it didn’t last long and my interest changed.
In my mid fifties I bought an old Schwinn Heavy Duty at a yard sale and my love of riding regularly grew along with my love of single speeds .
I’ve gone back forth between single and geared bikes with my interest in single speeds taking over .
I just recently converted my Schwinn CrossCut and CrossCross , along with a Trek MultiTrack.
And my Specilized Hardrock .
Never tried FG but thought about it . I have a frame or two laying around and a couple of flip flop hubs , so who knows .
Is 72 too late to start FG ?
I managed to get it to work as a single speed . I never owned a new bike until I was in my early thirties and bought a cheap department store bike , to ride with my daughter , but it didn’t last long and my interest changed.
In my mid fifties I bought an old Schwinn Heavy Duty at a yard sale and my love of riding regularly grew along with my love of single speeds .
I’ve gone back forth between single and geared bikes with my interest in single speeds taking over .
I just recently converted my Schwinn CrossCut and CrossCross , along with a Trek MultiTrack.
And my Specilized Hardrock .
Never tried FG but thought about it . I have a frame or two laying around and a couple of flip flop hubs , so who knows .
Is 72 too late to start FG ?
Likes For downtube42:
#1005
Newbie
Finding the right gearing
My first brief dabble with SS was in the ‘70s. I got a new Azuki “10 speed” in 1975, a 23” frame. In a a couple years it seemed small and I got a nicer 25” frame. I turned the Azuki into a single speed. I only used it on shorter, around town rides and eventually I gave it away.
I didn’t get back to single speed until about five years ago. Since then, I’ve had two bikes, a road frame and an MTB frame and both have been set up single speed for more than three of those years.
I’ve put gears back on briefly for two intervals, but riding an actual single speed just seems to make me happier.
One thing I’ve gone back and forth on is gearing. Lots of time as 42/16, but sometimes I switch to 42/17. I tend to prefer to push a little harder than some, but I started running regularly again a year ago. I seem to manage the overall load of cycling and running if I use the 42/17. Also, when the leaves drop, the wind is more of a challenge on windy rides and the lower 65 inch gear is easier to stay on top of.
Otto
I didn’t get back to single speed until about five years ago. Since then, I’ve had two bikes, a road frame and an MTB frame and both have been set up single speed for more than three of those years.
I’ve put gears back on briefly for two intervals, but riding an actual single speed just seems to make me happier.
One thing I’ve gone back and forth on is gearing. Lots of time as 42/16, but sometimes I switch to 42/17. I tend to prefer to push a little harder than some, but I started running regularly again a year ago. I seem to manage the overall load of cycling and running if I use the 42/17. Also, when the leaves drop, the wind is more of a challenge on windy rides and the lower 65 inch gear is easier to stay on top of.
Otto
For a recent 50 mile club ride, used 47x17 for the first 20 mile flattish section, and swapped over to the 47x19 at a regroup for the next 20 mile hilly section, but eventually got dropped by the group. Can only go so far keeping up with the geared up, fully kitted and aero bunch :/ Save the 42t up front, for the mountains and major hill climbs.
Last edited by highandlowrpm; 10-11-23 at 11:47 AM.
Likes For highandlowrpm:
#1006
Cheerfully low end
Join Date: Jun 2020
Posts: 1,978
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,044 Times
in
667 Posts
I highly recommend the white industries dos eno dual freewheel, for on the road manual gearing changes. You do have to convert from track 1/8” to 3/32” chainring and chain, but it’s great. I have the 17/19 and 20/22 tooth combos. Important to size the chain just right, so it will cover either rear wheel cog in the dropout space available. And locate the rear rim brake pads vertically just right for both cogs. With a 50t upfront and 17/19, I have either 79 or 70 gear inches available on my ride.
For a recent 50 mile club ride, used 47x17 for the first 20 mile flattish section, and swapped over to the 47x19 at a regroup for the next 20 mile hilly section, but eventually got dropped by the group. Can only go so far keeping up with the geared up, fully kitted and aero bunch :/ Save the 42t up front, for the mountains and major hill climbs.
For a recent 50 mile club ride, used 47x17 for the first 20 mile flattish section, and swapped over to the 47x19 at a regroup for the next 20 mile hilly section, but eventually got dropped by the group. Can only go so far keeping up with the geared up, fully kitted and aero bunch :/ Save the 42t up front, for the mountains and major hill climbs.
If I started to do rougher trails, I could see running 42/39 front and 17/20 in back. 42/17 for easy surfaces and 39/20 for single track. The MTB is freehub, so putting two cogs on is trivial.
Thanks!
Otto
Likes For ofajen:
#1007
Newbie
Yes, trails/mtb are completely different
I’m sure that works great for people who ride roads and do group rides. I ride solo rides nearly year-round almost entirely on our various trails (except brief bits on roads to reach the trails). So there is no drafting, I do all the work and something around 65-70 inches works well on level ground and is tolerable on hills.
If I started to do rougher trails, I could see running 42/39 front and 17/20 in back. 42/17 for easy surfaces and 39/20 for single track. The MTB is freehub, so putting two cogs on is trivial.
Thanks!
Otto
If I started to do rougher trails, I could see running 42/39 front and 17/20 in back. 42/17 for easy surfaces and 39/20 for single track. The MTB is freehub, so putting two cogs on is trivial.
Thanks!
Otto
#1008
Cheerfully low end
Join Date: Jun 2020
Posts: 1,978
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,044 Times
in
667 Posts
Very true. Trails/MTB riding is completely different from road riding. I’m addicted to the speed of roads, but understand the attraction of trail riding. No longer have that bike anymore, after a few too many scrapes on rides with friends. Seems like at least one person got bloodied on every ride :-/
Otto
Likes For ofajen:
#1009
Senior Member
Join Date: Jun 2008
Location: Somewhere South
Posts: 1,680
Bikes: Most of my bikes are Single Speed Conversions
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 267 Post(s)
Liked 3,067 Times
in
1,015 Posts
Fresh build
Finished putting this one together this morning.
Rode a four mile cruise around the neighborhood after the game .
Smooth riding , no name, light bike .
Rode a four mile cruise around the neighborhood after the game .
Smooth riding , no name, light bike .
Likes For OldCruiser:
#1010
Newbie
Join Date: Jan 2024
Location: Chicago-ish
Posts: 2
Bikes: cheap Schwinn Regent (fixed gear); 80's Miyata 310; 1963 Schwinn Typhoon klunker
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
bumping thread for the New Year...
mid-50's, back to bikes in general -- and fixed gear in particular -- this summer. Riding a bit this winter with studded tires -- mostly to and from the train. I had a Bianchi Pista about twenty years ago but traded it away during law school because no place to keep it in the high-rise we were living in.
Currently riding a crappy Schwinn Regent "track-ish" bike (track dropouts, anyway), running a nice easy 65 inch gear (46x19). Pulling the trigger soon an a Wabi Classic frameset to build into an all-rounder to try easy group rides (apparently lots of that on Chicago's North Shore), randonneur, and maybe a gravel race in MN this summer. Good times!
I'd forgotten how awesome riding fixed gear was...
mid-50's, back to bikes in general -- and fixed gear in particular -- this summer. Riding a bit this winter with studded tires -- mostly to and from the train. I had a Bianchi Pista about twenty years ago but traded it away during law school because no place to keep it in the high-rise we were living in.
Currently riding a crappy Schwinn Regent "track-ish" bike (track dropouts, anyway), running a nice easy 65 inch gear (46x19). Pulling the trigger soon an a Wabi Classic frameset to build into an all-rounder to try easy group rides (apparently lots of that on Chicago's North Shore), randonneur, and maybe a gravel race in MN this summer. Good times!
I'd forgotten how awesome riding fixed gear was...
#1011
Senior Member
Join Date: Oct 2008
Location: Portland, OR
Posts: 3,843
Bikes: Trek Domane SL6 Gen 3, Soma Fog Cutter, Focus Mares AL, Detroit Bikes Sparrow FG, Volae Team, Nimbus MUni
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 896 Post(s)
Liked 2,065 Times
in
1,081 Posts
bumping thread for the New Year...
mid-50's, back to bikes in general -- and fixed gear in particular -- this summer. Riding a bit this winter with studded tires -- mostly to and from the train. I had a Bianchi Pista about twenty years ago but traded it away during law school because no place to keep it in the high-rise we were living in.
Currently riding a crappy Schwinn Regent "track-ish" bike (track dropouts, anyway), running a nice easy 65 inch gear (46x19). Pulling the trigger soon an a Wabi Classic frameset to build into an all-rounder to try easy group rides (apparently lots of that on Chicago's North Shore), randonneur, and maybe a gravel race in MN this summer. Good times!
I'd forgotten how awesome riding fixed gear was...
mid-50's, back to bikes in general -- and fixed gear in particular -- this summer. Riding a bit this winter with studded tires -- mostly to and from the train. I had a Bianchi Pista about twenty years ago but traded it away during law school because no place to keep it in the high-rise we were living in.
Currently riding a crappy Schwinn Regent "track-ish" bike (track dropouts, anyway), running a nice easy 65 inch gear (46x19). Pulling the trigger soon an a Wabi Classic frameset to build into an all-rounder to try easy group rides (apparently lots of that on Chicago's North Shore), randonneur, and maybe a gravel race in MN this summer. Good times!
I'd forgotten how awesome riding fixed gear was...
Cheers
#1012
Newbie
bumping thread for the New Year...
mid-50's, back to bikes in general -- and fixed gear in particular -- this summer. Riding a bit this winter with studded tires -- mostly to and from the train. I had a Bianchi Pista about twenty years ago but traded it away during law school because no place to keep it in the high-rise we were living in.
Currently riding a crappy Schwinn Regent "track-ish" bike (track dropouts, anyway), running a nice easy 65 inch gear (46x19). Pulling the trigger soon an a Wabi Classic frameset to build into an all-rounder to try easy group rides (apparently lots of that on Chicago's North Shore), randonneur, and maybe a gravel race in MN this summer. Good times!
I'd forgotten how awesome riding fixed gear was...
mid-50's, back to bikes in general -- and fixed gear in particular -- this summer. Riding a bit this winter with studded tires -- mostly to and from the train. I had a Bianchi Pista about twenty years ago but traded it away during law school because no place to keep it in the high-rise we were living in.
Currently riding a crappy Schwinn Regent "track-ish" bike (track dropouts, anyway), running a nice easy 65 inch gear (46x19). Pulling the trigger soon an a Wabi Classic frameset to build into an all-rounder to try easy group rides (apparently lots of that on Chicago's North Shore), randonneur, and maybe a gravel race in MN this summer. Good times!
I'd forgotten how awesome riding fixed gear was...
#1013
Senior Member
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 2,800
Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,026 Times
in
723 Posts
Haven't previously seen this thread, I hopped on the SS bandwagon by converting an old horizontal road bike to a SS in 2022 for the cross season, only managed to do one race on it, and despite 3x having to stop to reposition the wheel after ripping it out of place, my time was better than the year prior which had me hooked. i particularly like riding it with the kids, they're getting faster but using the SS helps to level the playing field for them so some extent. For 2023 the wife and kids bought me the motobecane UNO for father's day. The thing was a bit of a beast and weighed about 30lbs. The plastic pedal survived 3 miles before tearing apart, replaced them with platforms for riding with the kids but tossed on some old ritchey spd style for racing in the fall. I rebuilt the wheels with some pub carbon rims and butted spokes for a 4lb weight savings and for 2024 would like to find a carbon fork to ditch the beast of a steel fork it comes with and install some trp hylex hydraulic disc brakes. I used it to race cross nationals in Louisville in december and placed 70th out of 74, not bad for racing with the flu and being too sick to remember to bring the dry condition tires that I should have been running. I like to think without the flu and with the right tires I could have placed in 62nd which was my placement based on national rankings but really the best I think i could have done was about 67th/68th. Either way, heading back next year to try for a better result, it was too much fun.
#1014
Newbie
72 and have been riding fixed since 2008. Just completed a 70s bike boom conversion to SS as I already have a fg. The gearing is 42x17...it's a little light on top so I'm going to go to 46x17 as I've got an old Origin8 chainring. The victory for me in this build is using the old single pivot calipers and finally figuring out how to set them. lol I used to just automatically get dual pivot calipers because the singles were such a pita to set. I've cracked the code! Cheers from New Zealand! 🇳🇿
Likes For Kiwisaver:
Thread
Thread Starter
Forum
Replies
Last Post
TejanoTrackie
Singlespeed & Fixed Gear
29
04-26-24 06:49 AM
Unkle Rico
Singlespeed & Fixed Gear
5
03-31-15 03:50 AM
Ayeeebroitsmatt
Bicycle Mechanics
6
01-14-15 11:54 AM