Anyone ever mount a motorcycle type of hard case trunk on a bicycle's rear rack?
#1
Junior Member
Thread Starter
Join Date: Aug 2010
Posts: 14
Bikes: 2011 Scott SUB 10, 1999 Univega mountain bike, 1990 Schwinn Crisscross, 1985 Murray Dirt Bike, 1979 Sears Special Longseat Cruiser, 1975 Toddler Tricycle.
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Anyone ever mount a motorcycle type of hard case trunk on a bicycle's rear rack?
Does anyone have any information and experience about installing, whether through modification or not, and riding with a scooter hard case trunk on a bicycle's rear cargo rack?
Below are two links to the cases considered from Saddlemen:
1. https://webcache.googleusercontent.co...&client=safari
2. https://www.saddlemen.com/store/index...oducts_id=7292
Thank you
John
Below are two links to the cases considered from Saddlemen:
1. https://webcache.googleusercontent.co...&client=safari
2. https://www.saddlemen.com/store/index...oducts_id=7292
Thank you
John
Last edited by John_; 08-26-10 at 01:59 AM.
#2
The Professor
Join Date: Nov 2009
Location: Center Sandwich, New Hampshire
Posts: 899
Bikes: Alex Moulton Double Pylon, Surly Big Dummy, Alex Moulton GT, AZUB TiFly
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
There are a few problems using these on a bicycle. First and foremost they put the load very high up which is not such a good idea on a bicycle. It isn't really such a good idea on a motorcycle either but since motorcycles weigh a lot more than a bicycle it is not as big a deal. Second, they tend to be noisy when mounted to a bicycle rack. This can be really irritating. Three, notice they don't list the weight ... there is a reason for that.
#3
Formerly Known as Newbie
Join Date: Mar 2002
Location: Helsinki, Finland
Posts: 6,249
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 4 Times
in
3 Posts
Ortlieb makes a bike specific version, the Bike-Box 2, I would imagine they have addressed mounting and noise (rattle) issues. It's relatively small though, compared to the ones OP linked to (9,5 litres vs. 28-48 litres). I'm sure other manufacturers have similar designs for bikes.
--J
--J
__________________
To err is human. To moo is bovine.
Who is this General Failure anyway, and why is he reading my drive?
Become a Registered Member in Bike Forums
Community guidelines
To err is human. To moo is bovine.
Who is this General Failure anyway, and why is he reading my drive?
Become a Registered Member in Bike Forums
Community guidelines
#4
Senior Member
Join Date: Jul 2008
Posts: 246
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My brother modified a Pelican case to mount on the top of his rear rack to safely carry his gaming laptop to/from work. It works pretty well he got some clips that mate with his rack and mounted them to the pelican case.
#5
Senior Member
Join Date: Apr 2003
Location: Houston we have a problem
Posts: 2,914
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Since i ride motorcycles and own cases like that from Givi and Coolcase, I can tell you that they are heavy.
That would be a lot of weight up high... not such a good idea on a bicycle.
That would be a lot of weight up high... not such a good idea on a bicycle.
#6
Papaya King
Join Date: Aug 2005
Location: Columbus, Ohio (Grandview area)
Posts: 1,640
Bikes: 2009 Felt X City D, 1985 (?) Trek 400, 1995 (?) Specialized Rockhopper, 1995 Trek 850
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I'm not sure how to find it/them, but I've seen pics on here of bike trunks mounted on rear racks. Maybe one of those people will find this thread.
#7
DancesWithSUVs
Join Date: Apr 2005
Location: Griffin Cycle Bethesda,MD
Posts: 6,983
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
https://www.bikebins.com/bikebins_usa.html
__________________
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
C'dale BBU('05 and '09)/Super Six/Hooligan8and 3,Kona Dew Deluxe,Novara Buzz/Safari,Surly Big Dummy,Marin Pt Reyes,Giant Defy 1,Schwinn DBX SuperSport,Dahon Speed Pro TT,Brompton S6L/S2E-X
#8
Gear Hub fan
Join Date: Nov 2008
Location: Reno, NV
Posts: 2,829
Bikes: Civia Hyland Rohloff, Swobo Dixon, Colnago, Univega
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
__________________
Gear Hubs Owned: Rohloff disc brake, SRAM iM9 disc brake, SRAM P5 freewheel, Sachs Torpedo 3 speed freewheel, NuVinci CVT, Shimano Alfine SG S-501, Sturmey Archer S5-2 Alloy. Other: 83 Colnago Super Record, Univega Via De Oro
Visit and join the Yahoo Geared Hub Bikes group for support and links.
https://groups.yahoo.com/group/Geared_hub_bikes/
Gear Hubs Owned: Rohloff disc brake, SRAM iM9 disc brake, SRAM P5 freewheel, Sachs Torpedo 3 speed freewheel, NuVinci CVT, Shimano Alfine SG S-501, Sturmey Archer S5-2 Alloy. Other: 83 Colnago Super Record, Univega Via De Oro
Visit and join the Yahoo Geared Hub Bikes group for support and links.
https://groups.yahoo.com/group/Geared_hub_bikes/
#9
Old, but not really wise
Join Date: Jul 2010
Location: Fairfax, VA commuting to Washington DC
Posts: 814
Bikes: 2010 Kona Dew Drop (the daily driver),'07 Specialized Roubaix (the sports car), '99 ish Kona NuNu MTB (the SUV), Schwinn High Plains (circa 1992?) (the beater)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#10
Senior Member
Join Date: Jul 2011
Location: Brooklyn
Posts: 73
Bikes: an old Fuji folding piece of **** contraption thingamabob.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I put my 50 liter GIVI on the back of my bike for ****s n giggles. Didn't ride with it though, but now I'm thinking about it again. Maybe a smaller 30l case.........
#11
LET'S ROLL
https://ecom1.planetbike.com/4020.html
Escape Pod
Rear Rack Cargo Box
Made from 100% recycled plastic
Lockable
Cargo net and soft interior protect your cargo
Watertight
Versatile and heavy duty rack mounting system
Retro reflective rear sticker
Dimensions: 15"(l) x 8.5"(w) x 7"(h)
Volume: 892 cubic inches
$64.99
Escape Pod
Rear Rack Cargo Box
Made from 100% recycled plastic
Lockable
Cargo net and soft interior protect your cargo
Watertight
Versatile and heavy duty rack mounting system
Retro reflective rear sticker
Dimensions: 15"(l) x 8.5"(w) x 7"(h)
Volume: 892 cubic inches
$64.99
__________________
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
One day: www.youtube.com/watch?v=20X43026ukY&list=UUHyRS8bRu6zPoymgKaIoDLA&index=1
#12
Human Powered Vehiclist
Join Date: Jun 2008
Location: Pacific Northwest
Posts: 255
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I use a Topeak rack trunk and even though it's not "hard" like the other bags previously suggested, it does it's job very well and can be quickly removed and attached to the rack with the cool quick locking function that Topeak uses. Using a hard sided trunk for "protection" probably won't work too well in my opinion though as a thief would more likely just steal the entire bike then just break open the truck open at their own convinience--plus a noticable trunk might attract a curious thief as well. Personally I'd rather just be able to quickly remove the trunk and take it with me.
#13
Hrumph!
Join Date: Jan 2009
Location: Vancouver, Canada
Posts: 253
Bikes: 2007 Dahon Cadenza w/ Alfine IGH11, modified MEC Desire w/Alfine IGH8,+ 2 ebikes: Bionx PL350 & 36V eZee FHB/Tidalforce frames.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have a rear trunk box that I don't use much anymore. Similar (the same, actually) as the previously posted Planet Bike Escape Pod.
About a dozen different suppliers sell that same box under different names for wildly varying prices. In Canada its available from Canadian Tire under the Raleigh brand for about $25 CDN. I've seen the same case under different names at various LBSs for $45, $55 and $65. It's not a bad case, light and lockable, but it does sit high, has to mount further towards the back of the rack for the lid to open fully and I couldn't stand the noise of loose articles rattling around in there. I may one day try to bodge it into a cooler and mount it on one of the ebikes for Summer beverage transportation.
I like this Otivia design though. Lower profile, better design and use of available space. https://www.otivia.com/
About a dozen different suppliers sell that same box under different names for wildly varying prices. In Canada its available from Canadian Tire under the Raleigh brand for about $25 CDN. I've seen the same case under different names at various LBSs for $45, $55 and $65. It's not a bad case, light and lockable, but it does sit high, has to mount further towards the back of the rack for the lid to open fully and I couldn't stand the noise of loose articles rattling around in there. I may one day try to bodge it into a cooler and mount it on one of the ebikes for Summer beverage transportation.
I like this Otivia design though. Lower profile, better design and use of available space. https://www.otivia.com/
#15
CRIKEY!!!!!!!
Join Date: May 2005
Location: all the way down under
Posts: 4,276
Bikes: several
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1589 Post(s)
Liked 687 Times
in
365 Posts
Why do do this instead of good paniers? Compared to panniers I can think of a long and distinguished list of big disadvantages of putting a big heavy box on your rack, and not one single advantage of any real consequence.
__________________
"Surely one can love his own country without becoming hopelessly lost in an all-consuming flame of narrow-minded nationalism" - Fred Birchmore
"Surely one can love his own country without becoming hopelessly lost in an all-consuming flame of narrow-minded nationalism" - Fred Birchmore
#16
Hrumph!
Join Date: Jan 2009
Location: Vancouver, Canada
Posts: 253
Bikes: 2007 Dahon Cadenza w/ Alfine IGH11, modified MEC Desire w/Alfine IGH8,+ 2 ebikes: Bionx PL350 & 36V eZee FHB/Tidalforce frames.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The boxes made specifically for bicycles, the Planet Bike Escape Pod and the Otivia, are not heavy at all in fact they're quite light (at least the PB is) and probably weigh in close to the weight of a full sized waterproof pannier. Personally, they don't work for me but I can see why someone would go that route, a lockable (read: mildly secure-ish) trunk box over a pannier. They may prefer the perception of a better balanced ride, maybe an improved sense of security or perhaps weather resistant qualities. Or all the above. :shrug:
#18
Full Member
Amazon suggested this ammo box as an alternative for the expensive Planet Bike box. Not bad for only $12 plus shipping. All you'd have to do is figure out some way to mount it to your rack.
#19
Senior Member
Join Date: Jul 2011
Posts: 170
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Be aware that hard cases have a LOT more "bounce" when going over hard jolts, the simple hooks-and-bungee method will not work at all and you will lose the box. A locking system like Klickfix, Ortleib QL, or simply $4 of u-bolts is a must.
#20
Senior Member
Join Date: Nov 2009
Location: Pacific, WA
Posts: 1,260
Bikes: Custom 531ST touring, Bilenky Viewpoint, Bianchi Milano, vintage Condor racer
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I've been using a Pelican case on my commuter for several years -- it's the best solution I've found for carrying my work laptop and dress clothes in Seattle winters.
Pelican Commuter Pannier by joshua_putnam, on Flickr
The mounting system is from KlickFix,
KLICKfix Rixen & Kaul Carrier Adapter by joshua_putnam, on Flickr
It also pops off easily to make me a seat on the train -- I have a 30-minute train ride in the middle of my 10-mile bike commute, and there often aren't any seats near the bike rack, or the bike rack is full and I have to hold my bike. But there's almost always room to use the case as a stool in the vestibule of the car.
The case is heavier than a cloth pannier -- I have various touring panniers that I used when I first started commuting this route, but wasn't happy with the way they carried my work clothes or laptop. (It doesn't take too much compression in a slightly damp bag to make durable wrinkles in a starched shirt. And the compression of the clothes in the bag made my laptop's screen fret against the keyboard, leaving keyboard marks on the screen.) The hard case leaves my clothes unwrinkled and holds my laptop securely without squishing the screen against the keyboard.
When it's heavily loaded, a hard case hung on the side can bend the stays on some lighter-duty racks, since the whole mass of the case moves together going over bumps. Not a problem with the Bruce Gordon rack on my commuter, but I did once bend the rack stays on my mountain bike using a side-mounted hard case for photo gear. (That wasn't the Pelican case, it was a Cobbworks Oyster Bucket,
Pelican Commuter Pannier by joshua_putnam, on Flickr
The mounting system is from KlickFix,
KLICKfix Rixen & Kaul Carrier Adapter by joshua_putnam, on Flickr
It also pops off easily to make me a seat on the train -- I have a 30-minute train ride in the middle of my 10-mile bike commute, and there often aren't any seats near the bike rack, or the bike rack is full and I have to hold my bike. But there's almost always room to use the case as a stool in the vestibule of the car.
The case is heavier than a cloth pannier -- I have various touring panniers that I used when I first started commuting this route, but wasn't happy with the way they carried my work clothes or laptop. (It doesn't take too much compression in a slightly damp bag to make durable wrinkles in a starched shirt. And the compression of the clothes in the bag made my laptop's screen fret against the keyboard, leaving keyboard marks on the screen.) The hard case leaves my clothes unwrinkled and holds my laptop securely without squishing the screen against the keyboard.
When it's heavily loaded, a hard case hung on the side can bend the stays on some lighter-duty racks, since the whole mass of the case moves together going over bumps. Not a problem with the Bruce Gordon rack on my commuter, but I did once bend the rack stays on my mountain bike using a side-mounted hard case for photo gear. (That wasn't the Pelican case, it was a Cobbworks Oyster Bucket,
Last edited by jputnam; 08-06-11 at 12:18 PM.