What is best 7 speed bike?
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
What is best 7 speed bike?
Going to upgrade from beach cruiser. What are the best brands of 7-speed bikes, as far as reliability and durability? Don't want something that's going to give me a lot of trouble.
#2
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
If you are looking to upgrade, I would suggest you skip 7 speed and go right to 8 speed. If you had a 20 or 25 year old 7 speed in good shape, I would say to ride it, but these days, even most entry level bikes are 8 speed.
Likes For MRT2:
#3
Senior Member
Join Date: Jul 2017
Location: Walnut Creek, CA
Posts: 759
Bikes: 1969 Peugeot PX10, 1992 Della Santa, Linus Roadster 8, Biria 700C ST-8
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 508 Times
in
322 Posts
How about something like this?
https://linusbike.com/products/roadster-7i
7 speed internal gear, very solid. Search around if they have a dealer near you.
https://linusbike.com/products/roadster-7i
7 speed internal gear, very solid. Search around if they have a dealer near you.
#4
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
If your area has a good local bike shop, just visit them ---- 7 speed has largely gone away and the most basic of entry level bikes now are usually 8 or 9 speed. (with 2 or 3 chainwheels up front)
But any of the big brands (Specialized, Trek, Giant, Cannondale) make great bicycles at all price points , but you don't have to limit yourself to those as others like Jamis, Fuji, MArin, Bianchi, Focus, Norco, Rocky Mountain - all have great bikes available for most uses
The component choices are predictable and within certain price points, will likely be pretty similar, so it becomes more about finding the frame that fits you from the shop that will reliably help you out after the sale if you have issues down the road
Likes For DMC707:
Likes For Joe Bikerider:
#6
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
How about something like this?
https://linusbike.com/products/roadster-7i
7 speed internal gear, very solid. Search around if they have a dealer near you.
https://linusbike.com/products/roadster-7i
7 speed internal gear, very solid. Search around if they have a dealer near you.
That is snappy looking ! I can appreciate a bike like that, even if it has no use for me personally
Likes For DMC707:
#7
Senior Member
For low maintenance and reliability, you might want to look at 8 speed internal gear hub with a belt drive.
https://www.bikeexchange.com.au/blog...ive-bikes-2019
https://www.bikeexchange.com.au/blog...ive-bikes-2019
#9
Pennylane Splitter
Join Date: Sep 2012
Location: Orange County, California
Posts: 1,879
Bikes: Yes
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 1801 Post(s)
Liked 1,439 Times
in
989 Posts
First off - Where will you be riding the new bicycle (primarily). Smooth paved roads, dirt roads, gravel rutted 4WD roads, trails? Using it for errands, fitness rides, long distance rides, touring?
For a multi-speed bike I'd probably stick with 9-speed drivetrain in the rear, 2 (or 3) chainrings up front; abundance of parts out there at reasonable prices so no problem doing maintenance (you WILL have to do some maintenance to keep it running smoothly).
For a multi-speed bike I'd probably stick with 9-speed drivetrain in the rear, 2 (or 3) chainrings up front; abundance of parts out there at reasonable prices so no problem doing maintenance (you WILL have to do some maintenance to keep it running smoothly).
#10
Senior Member
Join Date: Sep 2012
Location: Brighton, Michigan
Posts: 662
Bikes: Optima Baron LR, '14 Nishiki Maricopa,'87 Trek 330 Elance, '89 Miyata 1400, '85 Peugeot PGN10, '04 Fuji Ace, '06 Giant Rincon, '95 Giant Allegre, '83 Trek 620, '86 Schwinn High Sierra
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 224 Post(s)
Liked 162 Times
in
106 Posts
Do they even make 7 speed bikes anymore? With 130mm hubs, you'd think they'd just equip their bottom budget products out at 8 speeds with a spacer, sell the product, and call it done.
#11
Senior Member
Join Date: Oct 2015
Posts: 15,489
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7652 Post(s)
Liked 3,473 Times
in
1,834 Posts
What someone usually says evenaully in threads like this, is that you should go to as many local bike shops as possible and see what they offer 9and how thy treat you.)
Even if you don't see something you like, you will at least have seen and tested some of what is available .... knowledge is power (said the guy with the gun, trying to convince the scholar not to buy a gun of his own. )
Seriously .... decide what you plan to do with the bike and where and how and for how long, and people here .... we will give you way more opinions than you want.
Likes For Maelochs:
#12
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
Too many to give you an exhaustive list. But a short list might include Trek, Specialized, Giant, Raleigh, Cannondale, Jamis, Kona, Surly/Salsa/All City, Fuji, Cervelo, Bianchi,and BMC. There are no doubt other niche brands out there.
You need to do a little research and actually go to some local shops and see what is available and test ride a few bikes.
You need to do a little research and actually go to some local shops and see what is available and test ride a few bikes.
Likes For MRT2:
#13
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
The big difference is 8-speed gets you a cassette hub. 7-speed is more likely to be a freewheel hub with greater propensity for bent or broken rear axles.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Likes For Retro Grouch:
#14
Senior Member
Join Date: Jun 2007
Location: Wisconsin
Posts: 6,319
Bikes: 2012 Salsa Casseroll, 2009 Kona Blast
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1031 Post(s)
Liked 208 Times
in
146 Posts
I was gong to mention that but figured it might confuse OP. But you are right. A bike with a freehub is better, though if you already have an old 7 speed, it probably doesn't make sense to upgrade because of cost.
#15
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
Cassette hub is the first thing that I would look for. #2 would be no twist shifters.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
#16
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
1989 Fuji Club
was a 2 x 7 speed bike. I had one and it rode very nicely, was reliable, and looked good too. Find one of these. They came in a white or the teal shown below. Should cost you less that any new 7-speed bike, and ride better.
The hub was Uniglide cassette, though. So, once the cogs are worn, you can change the freehub mechanism to a modern Hyperglide replacement.
The hub was Uniglide cassette, though. So, once the cogs are worn, you can change the freehub mechanism to a modern Hyperglide replacement.
#17
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,636
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,532 Times
in
1,003 Posts
Maybe 1 step up from the referenced beach cruiser. I think it has a 7 speed cassette, with 1x in the front (lower hassle as it's therefore not 14 or 21 speeds).
https://www.giant-bicycles.com/us/cypress-2020
https://www.giant-bicycles.com/us/cypress-2020
Likes For Sy Reene:
#18
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
I had a 7 speed derailleur beach cruiser up to last summer. Before I got rid of it I upgraded to a used bike with an 8 speed Internal Gear Hub (IGH) that is similar to what @Joe Bikerider linked to in his two posts.
If you can afford the price bump of going to a Nexus 7 or 8 speed IGH, it's a good gear system for a commuter/exercise/recreational/utility bike. IGH bikes with the single front chain ring and rear sprocket won't drop the chain over hard bumps like a 7 or 8 speed derailleur bike with a single chain ring will. That was the most annoying thing on my 7-speed derailleur cruiser, dropping the chain. Also, the fact you can change gears on an IGH while the bike is stopped, which might not be necessary but is cool nonetheless.
Back to those two bikes Joe Bikerider showed, the Nexus 7 speed has slightly closer gear ratios than the Nexus 8 speed, which may be preferable, plus the Nexus 7 is a bit less expensive as well. https://sheldonbrown.com/nexus8.shtml
Now, the only two bikes I have is the aforementioned 8 speed IGH (shown below), and a 1 speed bike. I personally don't mind not having a derailler bike, but I'm not a performance type of rider. So there is that to consider.
Last edited by FiftySix; 03-28-20 at 10:54 AM. Reason: photo
#19
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
Here's another 7 speed.
https://www.electrabike.com/bikes/lo...-7i?g=stepover
Another 8 speed.
https://www.norco.com/bikes/2020/cit...indie-igh-a-8/
And another
https://www.breezerbikes.com/bikes/t...y/beltway-8-us
A classically styled 8 speed "racer" here.
https://www.pashley.co.uk/bikes/bicy...y-morgan-8.php
A less expensive 5 speed version here.
https://www.pashley.co.uk/bikes/bicycles/speed-5.php
If those other IGH bikes look too mundane, there is always the Electra Super Moto 8i to consider.
https://www.electrabike.com/bikes/super-moto-8i
https://www.electrabike.com/bikes/lo...-7i?g=stepover
Another 8 speed.
https://www.norco.com/bikes/2020/cit...indie-igh-a-8/
And another
https://www.breezerbikes.com/bikes/t...y/beltway-8-us
A classically styled 8 speed "racer" here.
https://www.pashley.co.uk/bikes/bicy...y-morgan-8.php
A less expensive 5 speed version here.
https://www.pashley.co.uk/bikes/bicycles/speed-5.php
If those other IGH bikes look too mundane, there is always the Electra Super Moto 8i to consider.
https://www.electrabike.com/bikes/super-moto-8i
Last edited by FiftySix; 03-29-20 at 03:52 PM. Reason: Added links 3, 4, and 5
#20
Senior Member
Consider an Electra Townie D7 ?
my partner and I each have one as our beach bikes.
hers is completely stock.
on mine, have upgraded pedals, installed fat frank tires and changed the saddle.
have ridden them lots of Km.
my partner and I each have one as our beach bikes.
hers is completely stock.
on mine, have upgraded pedals, installed fat frank tires and changed the saddle.
have ridden them lots of Km.
#21
Senior Member
Join Date: Apr 2010
Location: Elevation 666m Edmonton Canada
Posts: 2,482
Bikes: 2013 Custom SA5w / Rohloff Tourster
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1237 Post(s)
Liked 321 Times
in
248 Posts
I'm pretty sure the OP wants a reliable IGH. LOL I would too. Only Drum brakes are 100% reliable.
One guy tour rode 3 continents with a Nexus 7 coaster brake.
I keep wanting to like Linus, but they stick to lame rim brakes and the rims look so cheap too. The HB is 3" too wide, IMO.
That Public bike is much the same, but has an 8 IGH. Maybe a bit better quality. I like the quill stem.
The new Norco's have the crazy slope top tube FAD. HORRIBLE.
==============
And ..... The pedals on the Public are cheap garbage mouse traps. Might last until you get home. LOL Not the only one doing such. The front fender is laughable, almost as high as the axle. Maybe there were toe overlap fears. The Linus one is a whole inch lower. Selling art instead of practicality. Pffft
One guy tour rode 3 continents with a Nexus 7 coaster brake.
I keep wanting to like Linus, but they stick to lame rim brakes and the rims look so cheap too. The HB is 3" too wide, IMO.
That Public bike is much the same, but has an 8 IGH. Maybe a bit better quality. I like the quill stem.
The new Norco's have the crazy slope top tube FAD. HORRIBLE.
==============
And ..... The pedals on the Public are cheap garbage mouse traps. Might last until you get home. LOL Not the only one doing such. The front fender is laughable, almost as high as the axle. Maybe there were toe overlap fears. The Linus one is a whole inch lower. Selling art instead of practicality. Pffft
Last edited by GamblerGORD53; 03-28-20 at 12:03 AM.
#22
Senior Member
Join Date: Jul 2017
Location: Walnut Creek, CA
Posts: 759
Bikes: 1969 Peugeot PX10, 1992 Della Santa, Linus Roadster 8, Biria 700C ST-8
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 508 Times
in
322 Posts
I have a Linus 8 speed that I like so when I was looking up bikes for the OP I started there. Never heard of a 7 speed IGH but there it is. Is HB handlebar? I’ll have to look at mine. Hope you haven’t made me dissatisfied. If I think about it too much then who knows what might happen?
#23
I'm the anecdote.
Join Date: Apr 2019
Location: S.E. Texas
Posts: 1,822
Bikes: '12 Schwinn, '13 Norco
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 1110 Post(s)
Liked 1,176 Times
in
795 Posts
I'm pretty sure the OP wants a reliable IGH. LOL I would too. Only Drum brakes are 100% reliable.
One guy tour rode 3 continents with a Nexus 7 coaster brake.
I keep wanting to like Linus, but they stick to lame rim brakes and the rims look so cheap too. The HB is 3" too wide, IMO.
That Public bike is much the same, but has an 8 IGH. Maybe a bit better quality. I like the quill stem.
The new Norco's have the crazy slope top tube FAD. HORRIBLE.
==============
And ..... The pedals on the Public are cheap garbage mouse traps. Might last until you get home. LOL Not the only one doing such. The front fender is laughable, almost as high as the axle. Maybe there were toe overlap fears. The Linus one is a whole inch lower. Selling art instead of practicality. Pffft
One guy tour rode 3 continents with a Nexus 7 coaster brake.
I keep wanting to like Linus, but they stick to lame rim brakes and the rims look so cheap too. The HB is 3" too wide, IMO.
That Public bike is much the same, but has an 8 IGH. Maybe a bit better quality. I like the quill stem.
The new Norco's have the crazy slope top tube FAD. HORRIBLE.
==============
And ..... The pedals on the Public are cheap garbage mouse traps. Might last until you get home. LOL Not the only one doing such. The front fender is laughable, almost as high as the axle. Maybe there were toe overlap fears. The Linus one is a whole inch lower. Selling art instead of practicality. Pffft
BTW, a hacksaw can shorten bars, I've done that countless times.
Likes For FiftySix:
#24
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,519
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4355 Post(s)
Liked 3,994 Times
in
2,665 Posts
If you are looking at road groupsets Dura Ace 7401 and for mountain it would be Deore XT M735. Plenty of excellent bikes in that era came with it. These days though it is relegated to the cheap stuff with low quality components or lower cost internally geared hubs.
If you want more modern bikesI would head down to your local bike shop and take ride on what they have. Certainly you might highly consider upping your budget and getting a more quality bike but if you only plan on riding once in a blue moon a cheap bike is an option.
If you want more modern bikesI would head down to your local bike shop and take ride on what they have. Certainly you might highly consider upping your budget and getting a more quality bike but if you only plan on riding once in a blue moon a cheap bike is an option.
#25
Senior Member
What is best tire?
What is best color?
What is best saddle?
What is best pedal?
All of these questions, as well as yours, are unanswerable. There is no "best." Otherwise, everyone else would have to 'up their game' or go out of business.
What is best color?
What is best saddle?
What is best pedal?
All of these questions, as well as yours, are unanswerable. There is no "best." Otherwise, everyone else would have to 'up their game' or go out of business.