Cable Housing & End Cap Dimensions
#1
Senior Member
Thread Starter
Join Date: Jul 2005
Posts: 96
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cable Housing & End Cap Dimensions
Hey guys,
I have a motor scooter throttle cable housing that is missing an End Cap(sometimes called a ferrule??). I'm not sure what end cap to buy. Most of them are just described as "4mm", or "5mm". I see on cable housings there is the metal spiral looking part and the black outside jacket on top of that.
The metal spiral part of my housing measures about 4mm outer diameter, and the black jacket at 5 or 5.1mm OD.
What does the advertised 4mm or 5mm end caps fit? Which part of the cable housing are they specifying as 4 & 5mm?
Thanks
I have a motor scooter throttle cable housing that is missing an End Cap(sometimes called a ferrule??). I'm not sure what end cap to buy. Most of them are just described as "4mm", or "5mm". I see on cable housings there is the metal spiral looking part and the black outside jacket on top of that.
The metal spiral part of my housing measures about 4mm outer diameter, and the black jacket at 5 or 5.1mm OD.
What does the advertised 4mm or 5mm end caps fit? Which part of the cable housing are they specifying as 4 & 5mm?
Thanks
#2
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
The ferrules should be the same diameter as the cable. You want a ferrule? Or an end-cap to prevent fraying? Anywho - poke around here to see what you need. If it's just one or two, many bike-shops would just give you a few:
Bike Tools Etc. - 1000's of bicycle tools and parts for the home mechanic!
Bike Tools Etc. - 1000's of bicycle tools and parts for the home mechanic!
#3
Senior Member
Thread Starter
Join Date: Jul 2005
Posts: 96
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Pretty much one of these is what I want. Alligator Cable Housing Ferrule - Bag of Twenty | Alligator | Brand | www.PricePoint.com
The reason I want a ferrule is the metal part of the housing is getting pulled into the lever, and the outer jacket is getting pushed back. See my picture of it, you can see the outer jacket getting pushed back.
The reason I want a ferrule is the metal part of the housing is getting pulled into the lever, and the outer jacket is getting pushed back. See my picture of it, you can see the outer jacket getting pushed back.
#4
Great State of Varmint
Join Date: Sep 2008
Location: Dante's Third Ring
Posts: 7,476
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 15 Times
in
15 Posts
Rather than buying a bag of 20 right off the bat, try politely asking your local bike-shop if they can spare a couple. If only to entice you to patronize the shop, many will gladly fork over some.