SR Royal Fluted Stem - 22.0mm x 25.4mm x 95mm
03-03-21, 11:15 AM
#1
Senior Member
Thread Starter
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,326
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 346 Times
in
196 Posts
SR Royal Fluted Stem - 22.0mm x 25.4mm x 95mm
Here’s a fairly rare piece of C&V. SR Royal lightweight fluted stem in good rider condition.
This stem was missing its original long bolt. The seat for the bolt head is an odd size, smaller in diameter than average. I had to mill the bolt head of a standard bolt in order to make this stem usable again.
Unsure if the clamp bolt is a replacement or not.
A few small nicks along top right edge, but otherwise in good clean shape all around.
This one’s a shorty with just a little over 40mm of vertical adjustment.
• 22.0mm steerer tube
• 25.4mm bars
• 95mm reach
$36 shipped
$30 shipped SOLD
Paypal F&F or add 3% for F&S
This stem was missing its original long bolt. The seat for the bolt head is an odd size, smaller in diameter than average. I had to mill the bolt head of a standard bolt in order to make this stem usable again.
Unsure if the clamp bolt is a replacement or not.
A few small nicks along top right edge, but otherwise in good clean shape all around.
This one’s a shorty with just a little over 40mm of vertical adjustment.
• 22.0mm steerer tube
• 25.4mm bars
• 95mm reach
Paypal F&F or add 3% for F&S
Last edited by deux jambes; 03-07-21 at 03:36 PM.
03-07-21, 12:36 PM
#4
Newbie
Join Date: May 2020
Location: Texas Hill Country
Posts: 54
Bikes: '83 Specialized Allez by 3Rensho; '71 Colin Cape; '80 Gios Torino; '76 Eisentraut Limited; 80's Francisco Cuevas Rando; '96 Waterford 2200; Eisentraut Model A;
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 6 Times
in
4 Posts
PM sent
