WTB Dura Ace 7400 Rear Hub 36H for freewheel
#1
Senior Member
Thread Starter
Join Date: Jun 2017
Location: Earlville, IL
Posts: 660
Bikes: Some Schwinns, Raleighs, Centurions, Crescent, Bianchi
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Liked 289 Times
in
125 Posts
WTB Dura Ace 7400 Rear Hub 36H for freewheel
I want to build a wheelset using parts I already have, and I already have a 36 hole front hub. This has to be a freewheel hub. I was all set to build wheels using an NOS Miche Competition hubset I have but then realized the bike these wheels will be for has a 126mm rear opening and the Miches are 120mm, so back to the parts bins where I found the Dura Ace 7400 front hub. Hopefully someone has something I can use. Thanks for checking.
#2
Full Member
Join Date: Apr 2019
Location: Denver Metro, CO
Posts: 392
Bikes: 1972 Fuji The Finest | 1990 Bianchi Giro | 1999 LeMond Buenos Aires
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 303 Times
in
134 Posts
I want to build a wheelset using parts I already have, and I already have a 36 hole front hub. This has to be a freewheel hub. I was all set to build wheels using an NOS Miche Competition hubset I have but then realized the bike these wheels will be for has a 126mm rear opening and the Miches are 120mm, so back to the parts bins where I found the Dura Ace 7400 front hub. Hopefully someone has something I can use. Thanks for checking.