Dropout Eyelet Size on Dawes Galaxy?
#1
Senior Member
Thread Starter
Dropout Eyelet Size on Dawes Galaxy?
I'm putting a rear rack on a 70s Dawes Galaxy. It has mounting eyelets on the rear dropouts, but I'm not sure what size they are. They won't readily accept an M5 or #10-32 bolt, and M4 and #8 are both too small.
Is this an M5 hole that is gunked up and in need of tapping, or some oddball English size?
Is this an M5 hole that is gunked up and in need of tapping, or some oddball English size?
#2
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,749 Times
in
937 Posts
Could be British Whitworth threading, being from England at the time. Just a guess.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#3
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,036 Times
in
1,874 Posts
M5 x 0.8 is the most common eyelet thread. It was used by Campagnolo, Shimano and SunTour. Huret and Simplex were typically non-threaded. Given the small size it doesn't take much paint fill or foreign material to make for a tight fit. What brand are the dropouts? If they are stamped dropouts, there is a good chance they aren't tapped or were tapped by the owner.
Last edited by T-Mar; 07-16-19 at 08:15 AM.
#4
Senior Member
Thread Starter
M5 x 0.8 is the most common eyelet thread. It was used by Campagnolo, Shimano and SunTour. Huret and Simplex were typically non-threaded. Given the small size it doesn't take much paint fill or foreign material to make for a tight fit. What brand are the dropouts? If they are stamped dropouts, there is a good chance they aren't tapped or were tapped by the owner.
#6
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,244
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3803 Post(s)
Liked 3,324 Times
in
2,170 Posts
#7
Senior Member
Thread Starter
#8
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
I'm not a big fan of threaded eyelets anymore. Even with Locktite they tend to come loose. A through bolt with a nylok nut seems to work much better. The beggest issue with this is on the drive side, where fender and rack eyelets seem to always be in close proximity to the small cog on your rear wheel.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#9
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,498
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7346 Post(s)
Liked 2,452 Times
in
1,430 Posts
Why do rack-attaching fasteners tend to come loose more than anything else on a bike? Is it because of the weight they bear?
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#10
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,602
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 6,461 Times
in
3,194 Posts
I just freed a stuck bolt in the rear nds eyelet on the '70s Galaxy I'm working on. I used a small drill bit and just kept going at it until I removed a lot of bolt ... then I could finally unscrew it with vise grips. Whew!
.
I use the threaded Campy eyelet (without a nut) for the rear rack on my grocery getter. Every couple months I make sure those two m5 bolts are secure. I like that setup better than the necessity of a backing nut. Just seems "cleaner."
.
I use the threaded Campy eyelet (without a nut) for the rear rack on my grocery getter. Every couple months I make sure those two m5 bolts are secure. I like that setup better than the necessity of a backing nut. Just seems "cleaner."
#11
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
Not just racks, fender attachments tend to loosen with time as well.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For BFisher:
#13
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,779
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3583 Post(s)
Liked 3,395 Times
in
1,929 Posts
On a similar note, if you can, attach mudguards and racks to separate eyelets to minimize problems. That's why we used double eyelets on the Trek 720:
#14
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,644
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,696 Times
in
935 Posts
But they discontinued that partially through the 84/85 run.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#15
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,779
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3583 Post(s)
Liked 3,395 Times
in
1,929 Posts
#16
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,644
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,696 Times
in
935 Posts
It's interesting that it seemed to take place in the middle of the 84/85 run. I've seen pictures of several 84s, and at least one decaled as an 85 with 2 eyelets front and rear.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#17
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Just noticed this was not mentioned. There was another weird thread used in the UK, one that Jack Taylor *sometimes* used. It's called 2BA. It's 4.7mm diameter and 0.81 pitch. So if the tap went in kinda hard - - probably you just cut them out to a size you can actually get
#18
Newbie
Join Date: Nov 2020
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Just noticed this was not mentioned. There was another weird thread used in the UK, one that Jack Taylor *sometimes* used. It's called 2BA. It's 4.7mm diameter and 0.81 pitch. So if the tap went in kinda hard - - probably you just cut them out to a size you can actually get
#19
Old Bike Craphound
I just installed fenders on my Dawes Galaxy (old torch headbadge, so pre 1975) and M5 bolts went into the holes without complaining. It may be that they were retapped by the previous owner (another caphound), but it must be pretty close to M5, as they show no signs of injury.
-Will
-Will