Pannier suggestions
#26
Senior Member
Join Date: Oct 2015
Location: Puyallup, WA
Posts: 430
Bikes: Tout Terrain, Panamericana
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 15 Times
in
8 Posts
I have done that with my Ortliebs too. But no photo during cleaning.
I could not fit fenders into my S&S case, thus this tour I had no fenders on the bike.
And a day long rain event on a gravel road left the bike and everything else pretty messy. The campground showers were outside, not indoors. I took the panniers into the shower to wash them off.
I have bought maybe half a dozen pairs of fenders since then to try. Sometime soon I need to drop most of the failures off to the local bike charity, I think I finally figured out which fenders I can pack in the case with the bike for future tours.
I could not fit fenders into my S&S case, thus this tour I had no fenders on the bike.
And a day long rain event on a gravel road left the bike and everything else pretty messy. The campground showers were outside, not indoors. I took the panniers into the shower to wash them off.
I have bought maybe half a dozen pairs of fenders since then to try. Sometime soon I need to drop most of the failures off to the local bike charity, I think I finally figured out which fenders I can pack in the case with the bike for future tours.
The White river flows into the Puyallup rive. When the snows melt on Mt. Rainier the rive overflows and this is what you get.
This was just pas the point that I wouldhave turned around... of course
Time to clean the drive train?
Last edited by BBassett; 09-08-20 at 12:06 PM.
#27
Senior Member
stuff like that really is the worst case scenario for a drivetrain, and I could see how a belt drive would be pretty darn nice to have in gunge like that.
#28
Full Member
Before buying my Ortlieb, which as I said I do not like--weight, material, no pockets--I spent a long time searching. Wife got Axiom. Apart from the shoulder strap, they are better than Ortlieb; but the company has zero customer service and I would not buy them again. The thing I discovered is that compared to backpacks, the world of panniers is extremely limited and almost shockingly there seems to be no interest in lightweight models. I pack fro touring the same way I do for hiking, which means choosing carefully what I actually need and always buying lightweight gear. Aside from the fan club Ortlieb seems to have, I don't understand why people think the total weight of their touring bike is not important. As I live in Japan and spend hours riding up endless mountains, weight is a primary concern.
#29
Senior Member
Join Date: Oct 2015
Location: Puyallup, WA
Posts: 430
Bikes: Tout Terrain, Panamericana
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 15 Times
in
8 Posts
I don't think my frame is able to keep enough belt tension but I am having someone look into it. I'd love to be able to forget about the GD chain. And yes that was about the woste possible scenario for a chain, maybe volcanic ash would be worse, fire-n-brimstone maybe.
#30
Banned
Plus is lighter than the classic fabric .
and now they have a pocketed organizer to go in the bags ,
or you get a sewn bag with pockets then add a rain cover..
Robert Beckman is making the best of the organized divider featuring bags..
I bough the Beckman Bruce Gordon Rbag Rack pairing in the 80's ..
then they had a falling out, became competitors, recently Bruce retired..
..
and now they have a pocketed organizer to go in the bags ,
or you get a sewn bag with pockets then add a rain cover..
Robert Beckman is making the best of the organized divider featuring bags..
I bough the Beckman Bruce Gordon Rbag Rack pairing in the 80's ..
then they had a falling out, became competitors, recently Bruce retired..
..
#31
Senior Member
Join Date: Oct 2015
Location: Puyallup, WA
Posts: 430
Bikes: Tout Terrain, Panamericana
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 15 Times
in
8 Posts
Before buying my Ortlieb, which as I said I do not like--weight, material, no pockets--I spent a long time searching. Wife got Axiom. Apart from the shoulder strap, they are better than Ortlieb; but the company has zero customer service and I would not buy them again. The thing I discovered is that compared to backpacks, the world of panniers is extremely limited and almost shockingly there seems to be no interest in lightweight models. I pack fro touring the same way I do for hiking, which means choosing carefully what I actually need and always buying lightweight gear. Aside from the fan club Ortlieb seems to have, I don't understand why people think the total weight of their touring bike is not important. As I live in Japan and spend hours riding up endless mountains, weight is a primary concern.
This was a good climb:
25 Jul 20 - Mowich Lake
https://www.relive.cc/view/v8qkd2LGdKv
https://photos.app.goo.gl/hRSTYZ8UjzdpuQ7n8
P.S. You pointed out the "zero customer service" and made me think of how Arkel treated me. As I said stated I have been hard on my bar-bag. It's been pushed to its limits on load capacity and weight many, many times... well, always. I have had to reinforce the interior frame some. Because of my heavy use the mounting hardware springs that are designed to stop the bag from bunny-hopping off the front of your bike needed to be replaced. I called, sent some pics and they sent me two replacements no charge for parts of postage. That, in addition to the fact that I found exactly what I wanted in their huge selection of panniers, and their guarantee... what more can you ask for? One thing... I would like to see them make bar-bag covers in something other than Atomic Neon Bile.
Stay safe.
#32
Senior Member
Join Date: Jan 2010
Posts: 39,212
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18397 Post(s)
Liked 15,485 Times
in
7,316 Posts
Plus is lighter than the classic fabric .
and now they have a pocketed organizer to go in the bags ,
or you get a sewn bag with pockets then add a rain cover..
Robert Beckman is making the best of the organized divider featuring bags..
I bough the Beckman Bruce Gordon Rbag Rack pairing in the 80's ..
then they had a falling out, became competitors, recently Bruce retired..
..
and now they have a pocketed organizer to go in the bags ,
or you get a sewn bag with pockets then add a rain cover..
Robert Beckman is making the best of the organized divider featuring bags..
I bough the Beckman Bruce Gordon Rbag Rack pairing in the 80's ..
then they had a falling out, became competitors, recently Bruce retired..
..
2. Bruce Gordon passed away last year:
https://www.google.com/amp/s/www.pet...ies-at-71/amp/
Last edited by indyfabz; 09-08-20 at 07:57 PM.
#33
Senior Member
Join Date: Jun 2015
Location: Down Under
Posts: 1,936
Bikes: A steel framed 26" off road tourer from a manufacturer who thinks they are cool. Giant Anthem. Trek 720 Multiroad pub bike. 10 kids bikes all under 20". Assorted waifs and unfinished projects.
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Liked 1,154 Times
in
640 Posts
One thing about the vinyl or vinyl equivalent bags like the Ortliebs is the ease of patching holes with clear repair tape. I've got holes in the bottom of my front ones from banging into curbs, especially in Japan where curbs can be high for snowploughs. A bit of repair tape on each side and they're fixed.
I have lightened my ortiliebs a bit by replacing the backing stiffener with thin coreflute. I didn't do it for that reason, I needed to move the hooks to suit the Tubus Duo racks I have. I patched the old holes with vinyl repair tape.
I have lightened my ortiliebs a bit by replacing the backing stiffener with thin coreflute. I didn't do it for that reason, I needed to move the hooks to suit the Tubus Duo racks I have. I patched the old holes with vinyl repair tape.
#34
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,175
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3452 Post(s)
Liked 1,452 Times
in
1,131 Posts
1. Is Beckman still making gear? Last time I looked, his stuff was ridiculously expensive. My set of racks and four panniers was over $900–back in 1998. Great stuff. I still have the bags, but they in 2010 someone stole the racks along with the bike they were attached to, and the bags only fit his racks.
...
...
For example, a friend of mine had some cheap Performance brand (Transit?) panniers, he needed to move one hook on each and the hooks were riveted on. Drilled them out, patched the holes, drilled new holes and used bolts. Drilling out rivets produces a lot of heat, I do not know if he just did it real slow or used ice or what, but it can be done. Care is needed to avoid melting anything.
#35
Senior Member
Join Date: Jan 2010
Posts: 39,212
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18397 Post(s)
Liked 15,485 Times
in
7,316 Posts
The locking system and placement of the hooks are the issue. His racks from my time had swinging brackets on the top rails. Each bracket was secured by two M5 or M4 bolts. The top of each pannier had three hooks on the back and a few lower down. You put a bag on a rack, swing the bracket over the middle hook of the pannier and tighten the bolts. Made it impossible for the bag to ever come off unless the hooks broke away from the bag. Loved that feature, which also prevented snatch and grabs.
In theory, I could have someone drill through the aluminum stiffners and reposition the hooks to line up with the bars of my current Nitto Big racks. But then I would need someone fashion brackets and add bottle brazeons to the top rails in order to accommodate the bolts. Maybe I will get off my lazy but this winner and pay a visit to Bilenky or another local frame builder (former Bilenky employee) to explore the possibility. The local guy who built my road frame could likely do all this with ease, but between building bikes, running a LBS and being a family man, he is swamped. Maybe I will raise the subject with him in case business has dropped off due to the pandemic. I know he's supposed to start building my ex a frame next month.
The bags themselves are really cool. Lots of compartmentalization. There are even some dividers that you can unzip to create one large space. The fronts have large, mesh outer "pockets" that are great for drying things. However, they are not waterproof like Ortliebs, so you are wise to use the rain covers, which I also still have.
After typing all that, I found this photo of the type of rear rack I had on a BF thread asking for the ID of the maker:
You can see the what I tried to describe on the top rail. In addition to hooks for the top rail, each bag has hooks that fit down snug over the bottom two rails.
Below is a photo of the front rack, also from the same BF thread. Mine was the same except that by the time I purchased mine he had stopped making them to accommodate both mid and high level front pannier positions, so mine did not have the bolts on the top rails.
In theory, I could have someone drill through the aluminum stiffners and reposition the hooks to line up with the bars of my current Nitto Big racks. But then I would need someone fashion brackets and add bottle brazeons to the top rails in order to accommodate the bolts. Maybe I will get off my lazy but this winner and pay a visit to Bilenky or another local frame builder (former Bilenky employee) to explore the possibility. The local guy who built my road frame could likely do all this with ease, but between building bikes, running a LBS and being a family man, he is swamped. Maybe I will raise the subject with him in case business has dropped off due to the pandemic. I know he's supposed to start building my ex a frame next month.
The bags themselves are really cool. Lots of compartmentalization. There are even some dividers that you can unzip to create one large space. The fronts have large, mesh outer "pockets" that are great for drying things. However, they are not waterproof like Ortliebs, so you are wise to use the rain covers, which I also still have.
After typing all that, I found this photo of the type of rear rack I had on a BF thread asking for the ID of the maker:
You can see the what I tried to describe on the top rail. In addition to hooks for the top rail, each bag has hooks that fit down snug over the bottom two rails.
Below is a photo of the front rack, also from the same BF thread. Mine was the same except that by the time I purchased mine he had stopped making them to accommodate both mid and high level front pannier positions, so mine did not have the bolts on the top rails.
#36
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,175
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3452 Post(s)
Liked 1,452 Times
in
1,131 Posts
#37
Miles to Go
What about Arkel Dry-Lites?
Before buying my Ortlieb, which as I said I do not like--weight, material, no pockets--I spent a long time searching. Wife got Axiom. Apart from the shoulder strap, they are better than Ortlieb; but the company has zero customer service and I would not buy them again. The thing I discovered is that compared to backpacks, the world of panniers is extremely limited and almost shockingly there seems to be no interest in lightweight models. I pack fro touring the same way I do for hiking, which means choosing carefully what I actually need and always buying lightweight gear. Aside from the fan club Ortlieb seems to have, I don't understand why people think the total weight of their touring bike is not important. As I live in Japan and spend hours riding up endless mountains, weight is a primary concern.
#38
Banned
My set used buckles & straps to pull the bag hooks down firmly on the rack tubes...
making a no shake, no bungee bounce off, solid fitting..
making a no shake, no bungee bounce off, solid fitting..
#39
Senior Member
Join Date: Oct 2015
Location: Puyallup, WA
Posts: 430
Bikes: Tout Terrain, Panamericana
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 15 Times
in
8 Posts
That's why a fully suspended bike with a front rack that mounts to the fork crown and steerer tube rather than the fork slides is so nice.
#40
Banned
Yea but Tubus racks stopped making those a few years ago.. the 'Swing'
(Unable to predict the users ability to mount it safely, on a ever-changing variety of suspension fork's crowns)
So, now you hire one custom or be lucky on eBay ..
You bought one?
(Unable to predict the users ability to mount it safely, on a ever-changing variety of suspension fork's crowns)
So, now you hire one custom or be lucky on eBay ..
You bought one?
#41
Senior Member
Join Date: Dec 2015
Location: San Diego
Posts: 702
Bikes: 1978 Bruce Gordon, 1977 Lippy, 199? Lippy tandem, Bike Friday NWT, 1982 Trek 720, 2012 Rivendell Atlantis, 1983 Bianchi Specialissima?
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 345 Post(s)
Liked 174 Times
in
106 Posts
It is a fun read if nothing else. I’ve used his bags on two one week GDMBR tours and am extremely happy with them. The first week was part of an ACA tour. There were 13 of us and, as I recall, 3 people had various pannier mounting problems which were solved. All were Ortliebs. The bags I have are not particularly light.
I think I once found that beckman makes this adapter for other racks:
Photo also shows how his mounting system works. It is very secure.
Other than walking maybe 25 yards once because the low riders were too low for some truck ruts, I never felt disadvantaged by this setup off road.
#42
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,341
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,200 Times
in
2,357 Posts
I use Topeak Versa mounts for clamping them to a suspension fork
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#43
Banned
Koga Of NL, modified a specific suspension fork to take a tubus low rider rack..
A machined aluminum block fits over a boss on the fork lower casting, to mount the top rail onto..
Lower mounting bolt , threaded into fork ..
A machined aluminum block fits over a boss on the fork lower casting, to mount the top rail onto..
Lower mounting bolt , threaded into fork ..
Last edited by fietsbob; 09-09-20 at 08:20 PM.
#44
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,175
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3452 Post(s)
Liked 1,452 Times
in
1,131 Posts
I met a gal six years ago that was on a long tour, she had had her Tubus Swing repaired several times because it could not be replaced.
She had an air suspension fork. From my motorcycle days, I recall that the best handling was to minimize your un-sprung weight and get as much of your weight as possible on the part of the bike that the suspension supported. The Tubus Swing was the only front bicycle rack I had ever seen that did that. You can see it on the front of her bike. The red Front Roller panniers (one on the ground, one on the bench) went on the Swing. Pair of Front Rollers is 25 liters.
She had an air suspension fork. From my motorcycle days, I recall that the best handling was to minimize your un-sprung weight and get as much of your weight as possible on the part of the bike that the suspension supported. The Tubus Swing was the only front bicycle rack I had ever seen that did that. You can see it on the front of her bike. The red Front Roller panniers (one on the ground, one on the bench) went on the Swing. Pair of Front Rollers is 25 liters.
#45
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,175
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3452 Post(s)
Liked 1,452 Times
in
1,131 Posts
On my expedition bike I am using some Axiom front racks that I added support braces to, those racks mount my front panniers up about three or four inches higher than standard low rider rack does, thus my front ground clearance is similar to rear ground clearance.
#46
Senior Member
#47
Senior Member
Join Date: Oct 2015
Location: Puyallup, WA
Posts: 430
Bikes: Tout Terrain, Panamericana
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 196 Post(s)
Likes: 0
Liked 15 Times
in
8 Posts