Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

The Component Everyone Loves (Except You)

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

The Component Everyone Loves (Except You)

Old 08-21-20, 02:55 PM
  #1  
Fahrenheit531 
52psi
Thread Starter
 
Fahrenheit531's Avatar
 
Join Date: Aug 2013
Location: Tucson, AZ
Posts: 4,134

Bikes: Schwinn Volare ('78); Raleigh Competition GS ('79)

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 800 Times in 390 Posts
The Component Everyone Loves (Except You)

Ever tried a component that was supposed to be The Best Thing Ever, according to pretty much everyone who used it, only to find out it wasn't your thing? Let's celebrate some awesome-not-awesome.

After a recent mishap on my #1 bike I needed to replace the bars. Every instinct said "the bike was perfect, just go with what was there." But another voice kept reminding me how I'd been meaning to try the Nitto Noodle for at least a couple of years, and now was my chance to make my perfect steed even more perfect, thus reaching levels of comfort and glory hitherto unimagined.

Yeah, notsomuch. Hand numbness -- once a near-mythical beast that only rarely entered my world at all -- became a regular foe almost immediately. Upside: where normally I spend ~90% of my time in the drops, now I was well and truly motivated to explore a variety of hand positions. Downside: trading hand numbness for wrist soreness isn't my idea of progress. I gave them some time, thinking maybe I just needed to adjust to the wider (440mm vs my normal 420, as recommended by Riv) spacing in the drops. I also wanted to allow for the possibility that the Noodle's, ummm, aesthetic challenges were translating into a psychologically-induced, physical reaction that would be overcome with time. Nope. These bars just plain don't work for me, and I'll officially be back to my Mod 115's in 4-7 business days.

I'm not bashing the Nitto Noodle here, nor looking for suggestions or solutions. Clearly these bars are a panacea for many, and I truly hoped to share in that wonder and amazement. It just didn't work out.
__________________
A race bike in any era is a highly personal choice that at its "best" balances the requirements of fit, weight, handling, durability and cost tempered by the willingness to toss it and oneself down the pavement at considerable speed. ~Bandera
Fahrenheit531 is offline  
Likes For Fahrenheit531:
Old 08-21-20, 03:25 PM
  #2  
Wileyone 
Senior Member
 
Wileyone's Avatar
 
Join Date: Oct 2014
Location: GWN
Posts: 2,541
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 605 Times in 402 Posts
Yes,

Chorus monoplaner brakes.

Hideous things. Overweight, no cable release. But everyone else seems to love them.
Wileyone is offline  
Likes For Wileyone:
Old 08-21-20, 03:29 PM
  #3  
Erzulis Boat 
Le Crocodile
 
Erzulis Boat's Avatar
 
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Liked 771 Times in 311 Posts
Originally Posted by Wileyone
Yes,

Chorus monoplaner brakes.

Hideous things. Overweight, no cable release. But everyone else seems to love them.
I like them. They just scream "skinny tire!". I distinctly remember the time when super skinny tires pumped up to the moon were all the rage.

Pure nostalgia.
Erzulis Boat is offline  
Likes For Erzulis Boat:
Old 08-21-20, 04:09 PM
  #4  
top506
Death fork? Naaaah!!
 
top506's Avatar
 
Join Date: Nov 2005
Location: The other Maine, north of RT 2
Posts: 5,313

Bikes: Seriously downsizing.

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 555 Post(s)
Liked 615 Times in 275 Posts
Two, both Campy NR: The RD and that horrid, horrid two bolt seat post.

Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.

(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
top506 is offline  
Likes For top506:
Old 08-21-20, 04:21 PM
  #5  
iab
Senior Member
 
iab's Avatar
 
Join Date: Jun 2006
Location: NW Burbs, Chicago
Posts: 12,153
Mentioned: 200 Post(s)
Tagged: 0 Thread(s)
Quoted: 2992 Post(s)
Liked 3,704 Times in 1,392 Posts
Any Brooks saddle. Not sayin they're bad, just don't live up up to the hype.
iab is offline  
Old 08-21-20, 04:27 PM
  #6  
seedsbelize 
smelling the roses
 
seedsbelize's Avatar
 
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,428

Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5

Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times in 612 Posts
Centurion Ironman
__________________
Originally Posted by Bah Humbug
Auto-pause is a honey-tongued devil whispering sweet lies in your ear.


seedsbelize is offline  
Old 08-21-20, 04:30 PM
  #7  
Wileyone 
Senior Member
 
Wileyone's Avatar
 
Join Date: Oct 2014
Location: GWN
Posts: 2,541
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 605 Times in 402 Posts
Originally Posted by seedsbelize
Centurion Ironman
schwinn paramount.
Wileyone is offline  
Old 08-21-20, 04:46 PM
  #8  
BFisher
Senior Member
 
Join Date: Aug 2013
Posts: 2,336
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,897 Times in 889 Posts
Suntour LD-1500 Power Ratchet downtube shifters.

Fugly.
Downshifts are fine.
Upshifts are not.
Gosh they are ugly!

I much prefer the 1600 Cyclone shifters with the hidden band clamp. They reside in my Grand Jubile. The 1500's are in a box.
BFisher is offline  
Old 08-21-20, 05:20 PM
  #9  
seypat
Senior Member
 
Join Date: Oct 2010
Posts: 8,755
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3190 Post(s)
Liked 2,460 Times in 1,489 Posts
I don't have much love for Campy derailleurs or the seatpost that's already been mentioned. I don't care for the feel of Suntour barcons. As for bike frames, hard to comment because of the differences in dimensions through the sizes. I ride 54-56 frames. A frame in the 58+ range is a totally different bike than what I ride no matter the brand.
seypat is online now  
Old 08-21-20, 05:50 PM
  #10  
ascherer 
Senior Member
 
ascherer's Avatar
 
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,767

Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1

Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 931 Post(s)
Liked 2,840 Times in 963 Posts
Black Cinelli stem
Thompson Elite setback seatpost
Moustache bars
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport





ascherer is offline  
Likes For ascherer:
Old 08-21-20, 05:54 PM
  #11  
Erzulis Boat 
Le Crocodile
 
Erzulis Boat's Avatar
 
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Liked 771 Times in 311 Posts
Originally Posted by top506
Two, both Campy NR: The RD and that horrid, horrid two bolt seat post.

Top
Absolutely LOVE the 2 bolt!

I get to use my special wrench, and savor the time to get the saddle dialed in. It forces one to slow down, and just enjoy the process. I do so enjoy the little tasks when working on vintage bikes. Greasing the threads on the expander bolt within a quill stem for instance, or rebuilding a pedal..............it's great!

Having hundreds of ball bearings on hand, so when I drop one...............who cares! I will grab another. Simple joys.

Last edited by Erzulis Boat; 08-21-20 at 05:57 PM.
Erzulis Boat is offline  
Likes For Erzulis Boat:
Old 08-21-20, 05:55 PM
  #12  
Lascauxcaveman 
Senior Member
 
Lascauxcaveman's Avatar
 
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 8,016

Bikes: A green one, "Ragleigh," or something.

Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 629 Times in 355 Posts
Campy Synchro shifters. Oh, wait a minute, everybody hates those things. Because they suck. Never mind.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●

Lascauxcaveman is offline  
Likes For Lascauxcaveman:
Old 08-21-20, 05:55 PM
  #13  
Erzulis Boat 
Le Crocodile
 
Erzulis Boat's Avatar
 
Join Date: Oct 2005
Location: Santa Barbara Calif.
Posts: 1,873
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 367 Post(s)
Liked 771 Times in 311 Posts
Originally Posted by ascherer
Black Cinelli stem
Thompson Elite setback seatpost
Moustache bars
I will echo the mustache bars. Black Cinelli stem? I like those!
Erzulis Boat is offline  
Old 08-21-20, 06:06 PM
  #14  
SwimmerMike 
Senior Member
 
Join Date: Aug 2020
Location: Saratoga, CA
Posts: 823

Bikes: 1981 Bianchi Specialissim, 1976 Colnago Super. 1971 Bob Jackson. 2012 Kestrel 4000. 2012 Willier. 2016 Fuji Cross 1.1

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 273 Post(s)
Liked 919 Times in 380 Posts
Originally Posted by Erzulis Boat
Absolutely LOVE the 2 bolt!

I get to use my special wrench, and savor the time to get the saddle dialed in. It forces one to slow down, and just enjoy the process. I do so enjoy the little tasks when working on vintage bikes. Greasing the threads on the expander bolt within a quill stem for instance, or rebuilding a pedal..............it's great!

Having hundreds of ball bearings on hand, so when I drop one...............who cares! I will grab another. Simple joys.



I have to second (or is the third) the 2 bolt Campy seat post. I even went out to buy the special wrench last week hoping that using the correct tool would enlighten me. Even with the Campy seatpost tool, I have to throw it on the list
SwimmerMike is offline  
Old 08-21-20, 06:07 PM
  #15  
T-Mar
Senior Member
 
Join Date: Nov 2004
Posts: 23,233
Mentioned: 652 Post(s)
Tagged: 1 Thread(s)
Quoted: 4719 Post(s)
Likes: 0
Liked 3,034 Times in 1,874 Posts
Anything with Italian threading. Combining imperial and metric dimensions in a thread standard is is just wrong.
T-Mar is offline  
Likes For T-Mar:
Old 08-21-20, 06:13 PM
  #16  
gaucho777 
Senior Member
 
gaucho777's Avatar
 
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,445

Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin

Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 826 Post(s)
Liked 2,048 Times in 545 Posts
Suntour barcons.

Too much cables. Never had the right feel. I don't mind reaching down.
gaucho777 is offline  
Likes For gaucho777:
Old 08-21-20, 06:15 PM
  #17  
Reynolds 
Passista
 
Reynolds's Avatar
 
Join Date: Jul 2005
Posts: 7,584

Bikes: 1998 Pinarello Asolo, 1992 KHS Montaña pro, 1980 Raleigh DL-1, IGH Hybrid, IGH Utility

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 866 Post(s)
Liked 711 Times in 392 Posts
I was a bit disappointed with my Pinarello frame. It's a great ride, but not the hyper-super-ultra many said it should be.
Reynolds is online now  
Old 08-21-20, 06:17 PM
  #18  
Wileyone 
Senior Member
 
Wileyone's Avatar
 
Join Date: Oct 2014
Location: GWN
Posts: 2,541
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 1858 Post(s)
Liked 605 Times in 402 Posts
Brifters...
So much "clutter" in the cockpit.
Wileyone is offline  
Likes For Wileyone:
Old 08-21-20, 06:18 PM
  #19  
merziac
Senior Member
 
merziac's Avatar
 
Join Date: Oct 2015
Location: PDX
Posts: 14,099

Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2

Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4493 Post(s)
Liked 6,297 Times in 3,632 Posts
Originally Posted by SwimmerMike
I have to second (or is the third) the 2 bolt Campy seat post. I even went out to buy the special wrench last week hoping that using the correct tool would enlighten me. Even with the Campy seatpost tool, I have to throw it on the list
Go to Home Depot, and get the Husky straight 10mm box end ratcheting combo wrench, pair it with a Brooks and the 2 bolt will become your friend.
merziac is offline  
Likes For merziac:
Old 08-21-20, 06:36 PM
  #20  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4742 Post(s)
Liked 3,860 Times in 2,509 Posts
Brooks/leather on steel saddles don't work for me. I rode the (excellent) Fuji America seat on my commuter for three years, When that bike got stolen, the bike loss was sad but I thanked the thief for taking the seat.

I loved the design of the old NR seatpost. (Never had one but raced the similar Zeus post.) Being able to dial in the tilt exactly (and change the tilt for saddle sores by a lot and 2 weeks later go back exactly). Yes. a PITA to reach those bolts but Campy made the special wrench that worked quite well. And yeah, the newer Allen key from the bottom posts are far easier but those old NRs were a Godsend compared to the drought that happened in the '80s when everything was one-bolt. (I rode a Laprade between cliicks 8 years knowing if I ever touched that bolt I would never get that position again. So to this thread, the (then) new, improved, lighter, sexier one-bolt posts.)

I don't jump on fads so a lot has come and passed that hasn't burned me. Oh, one I didn't really choose - the Chris King Grip Nut headset. Came on my custom (threaded steerer) fix gear. Very low stack. Was supposed to the second coming. Well it sort of was. Coming loose is what it did. In 200 miles, a tiny bit loose, 400 and the rattle was back. Yes, it probably was me being a hack, but other hacks include several very good mechanics and the Chris King factory. At 8000 miles I took it off and put on a Tange. Had to mix with el cheapo Tange HS parts to get the stack down and the steerer was not slotted so between minimal threads and no slot, the Tange has never seen a lock washer. Still it is less trouble than the King. Yes, Tanges are only good for ~8000 miles but for $30, who cares? Soon I will have the framebuilder trim the head tube down and slot the fork and then I will be back to threads, lock washer and heaven!

Ben
79pmooney is offline  
Old 08-21-20, 06:44 PM
  #21  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4742 Post(s)
Liked 3,860 Times in 2,509 Posts
Originally Posted by T-Mar
Anything with Italian threading. Combining imperial and metric dimensions in a thread standard is is just wrong.
I have several Miche track hubs. They have a lockring of bigger diameter than the common standard, Campagnolo/Italian? I've had two SunTour 12 tooth bell-shaped lockrings machined to the Miche threading. Very hard steel, Machinist charged me a lot for both the time and wear on his tools. (Did a first class job so now I have the most valuable - but almost useless - small cog lockrings on the planet.)
79pmooney is offline  
Old 08-21-20, 06:53 PM
  #22  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4742 Post(s)
Liked 3,860 Times in 2,509 Posts
Originally Posted by BFisher
Suntour LD-1500 Power Ratchet downtube shifters.

Fugly.
Downshifts are fine.
Upshifts are not.
Gosh they are ugly!

I much prefer the 1600 Cyclone shifters with the hidden band clamp. They reside in my Grand Jubile. The 1500's are in a box.
I love the Power Ratchets. For me, they work so well it doesn't matter what they look like. Raced them with my 5-speed Cyclones in the '70s. Now I did spec a mount for Superb top-mounted DT shifter for my custom and have never regretted it. Sweet, straight friction, about as good as has ever happened, look clean, are the top-mount I never hit with my knees and are so easy to double shift. (I'm guessing the feel is close to the Cyclone you have.)
79pmooney is offline  
Old 08-21-20, 06:54 PM
  #23  
merziac
Senior Member
 
merziac's Avatar
 
Join Date: Oct 2015
Location: PDX
Posts: 14,099

Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2

Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4493 Post(s)
Liked 6,297 Times in 3,632 Posts
Downtube oldschool Campy shifters, love the look, feel and how well they work, don't want to reach down so can't stand serious riding with them.

Maybe I'm not a serious rider, big frames aggravate this so.....

That being said, them a Brooks and a 2 bolt are so cool you can't go wrong, aesthetic wise.

C+V is not right for me without the Brooks and 2 bolt, have them on every rider.

Last edited by merziac; 08-21-20 at 06:59 PM.
merziac is offline  
Likes For merziac:
Old 08-21-20, 06:55 PM
  #24  
bikingshearer 
Crawlin' up, flyin' down
 
bikingshearer's Avatar
 
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,623

Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.

Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1005 Post(s)
Liked 2,465 Times in 1,030 Posts
Originally Posted by merziac
Go to Home Depot, and get the Husky straight 10mm box end ratcheting combo wrench, pair it with a Brooks and the 2 bolt will become your friend.
Yup. This. It even works with the Rolls saddles I like if you go in through the back. The ratchet means that even the small amount of back-and-forth makes progress. Once you get the bolts finger tight, it does not take much wrenching with the ratchet to tighten 'er up

The Campy two-bolt post is still my favorite for looks and for function. Any single-bolt post with serrations inevitably ends up with me wanting to be in between two indents; no such issue with a Campy two-bolt. My next favorite is the Nitto S-83 two-bolt. It's easier to set up than the Campy, it has the infinite-positions ability, and since Nitto makes it, you know it will be used by cockroaches while they eat Twinkies and ride Varsinentals after the Apocalypse. It looks good, but not quite as good as an old Campy and I have only seen them in 27.2 and 26.8. With a little patience, you can find a Campy in pretty much any size we could possibly have a use for.

On the other hand, I have found the Campy seat post tool to be pretty much useless; the 10mm ratchet works much better for me.
__________________
"I'm in shape -- round is a shape." Andy Rooney
bikingshearer is offline  
Likes For bikingshearer:
Old 08-21-20, 06:56 PM
  #25  
Drillium Dude 
Banned.
 
Drillium Dude's Avatar
 
Join Date: Jul 2009
Location: PAZ
Posts: 12,394
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,823 Times in 1,709 Posts
I'll say it: Campy Deltas. Don't believe the hype

DD
Drillium Dude is offline  
Likes For Drillium Dude:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.