Campy Powershift vs Ultrashift Questions
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Campy Powershift vs Ultrashift Questions
I currently have two bikes with 2006 Campy Ergopower 10-speed brifters, one Chorus and one Record (AFAIK, identical except for decals and price). These are the older pre-QS brifters that still use the older G-springs, etc. So far they are working well but with 21,000 miles on one set and 25,000 miles on the other, they will have to require rebuilding sometime in the not too distant future.
Apparently, repair parts are still available but Campy no longer lists them in their spare parts catalog so it's only a matter of time before these can't be fixed. So, to maintain my 10-speed drivetrains, I may need new shifters when these finally go south for good and I don't want to spend a fortune upgrading to 11-speed, particularly since i have a triple crank and these are no longer in Campy's lexicon. Also, I don't want to buy one or two sets of the NOS 10-speed "Ultrashift" levers still available as I don't want to stockpile these for who knows how long.
So, my question is about the Centaur "Powershift" 10-speed levers now available. Assuming Campy offers 10-speed brifters in Veloce or above for the forseeable future, despite the one-upshift-at-a-time "feature", are these decent brifters? That one-shift limitation isn't a show stopper to me as I've used STI's for tens of thousands of miles and never found it a problem. The multiple upshifts my current brifters have is nice but certainly not essential. So, other than that, are the Powershift levers OK?
Apparently, repair parts are still available but Campy no longer lists them in their spare parts catalog so it's only a matter of time before these can't be fixed. So, to maintain my 10-speed drivetrains, I may need new shifters when these finally go south for good and I don't want to spend a fortune upgrading to 11-speed, particularly since i have a triple crank and these are no longer in Campy's lexicon. Also, I don't want to buy one or two sets of the NOS 10-speed "Ultrashift" levers still available as I don't want to stockpile these for who knows how long.
So, my question is about the Centaur "Powershift" 10-speed levers now available. Assuming Campy offers 10-speed brifters in Veloce or above for the forseeable future, despite the one-upshift-at-a-time "feature", are these decent brifters? That one-shift limitation isn't a show stopper to me as I've used STI's for tens of thousands of miles and never found it a problem. The multiple upshifts my current brifters have is nice but certainly not essential. So, other than that, are the Powershift levers OK?
#2
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
HillRider asking a question ?
I haven't used Powershift. I have 2010 Centaur that works quite well. Not sure how different they are other than the clicks, but I'm happy with mine.
I haven't used Powershift. I have 2010 Centaur that works quite well. Not sure how different they are other than the clicks, but I'm happy with mine.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Last edited by Homebrew01; 10-13-12 at 09:06 AM.
#3
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
#4
Senior Member
Join Date: Jul 2008
Location: Knoxville, TN
Posts: 909
Bikes: Klein
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I have 2007 Centaur QS shifters which I think work fine. I think they work much like the new PowerShift shifters.
That said, I think it's unfortunate that Campy seems to be going away from the Ultrashift design that allows multiple shifts. That distinguished Campy from Shimano and SRAM.
Personally, I'm just going to wait to see what Campy comes up with before I replace anything.
That said, I think it's unfortunate that Campy seems to be going away from the Ultrashift design that allows multiple shifts. That distinguished Campy from Shimano and SRAM.
Personally, I'm just going to wait to see what Campy comes up with before I replace anything.
#5
Senior Member
I'd read-up on how the powershift lever works with a triple FD. It sure won't work like the 2006 model or an ultrashift model that has 6 clicks available to operate a triple FD. I suspect the the trim function would be very limited. It only takes a 1-click dump to shift from the big ring to the middle ring and another to shift to the little ring.
If you buy powershift levers, they must be the triple version, not the double crank model.
https://www.campagnolo.com/jsp/en/gro...x3_catid_8.jsp
If you buy powershift levers, they must be the triple version, not the double crank model.
https://www.campagnolo.com/jsp/en/gro...x3_catid_8.jsp
#6
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
It's too bad the Powershift levers are still so limited for front shifting and I suspect the 10x3 levers DaveSSS linked to are still too coarse in their trim steps. I too am going to wait until I'm compelled to replace my current levers.
#7
Senior Member
Join Date: Dec 2005
Posts: 7,848
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The only big difference w/o taking in consideration functionality (that you dont care) is the lever shape. The new shape is more comfortable than the old one, besides that pretty much power shift should be ok 4'ya!
#8
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
The problem with Ultrashift levers that have the desired front shifting is that they are now all 11-speed.
#9
Senior Member
Join Date: Jul 2008
Location: Knoxville, TN
Posts: 909
Bikes: Klein
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
But if they don't sort it out when I need to replace my shifters, I'll probably go with SRAM.
#10
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
I bought an extra set of 2010 Centaur shifters to avoid all this nonsense.
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#11
Senior Member
Join Date: Jul 2008
Location: Knoxville, TN
Posts: 909
Bikes: Klein
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#12
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
I've heard 2010 Veloce are still available ... from Shinybikes ?
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#13
Senior Member
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,341
Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 550 Post(s)
Liked 325 Times
in
226 Posts
Let me enumerate the non-cosmetic differences between shifters as of late 2009 (following the running change putting bearings on the lower level shifter main pivots and the 10 speed index cam fix). They were identical from Veloce through Super Record except:
- Centaur had a carbon brake blade option which saved 21g
- Athena added the 11 speed index cam but returned the alloy brake lever
- Chorus added back the carbon brake blade
- Super Record had lighter rear ratchets which save 7g for the pair
Even the Veloce and Centaur alloy levers (358g) weighed less than Shimano's 2009 7900 Dura-Ace levers (379 claimed, 368 actual) and ran the same cog count (10).
If you don't want the extra cog (39x25 or 34x23 is enough to get a fit rider over everything in the Colorado Rockies spinning up most of it, many riders don't care about the 17-19 cog gap which goes with 12-25, those that do many are happy with 13-26) you gained almost nothing (carbon brake levers feel better in cool weather) by buying more than Veloce and still beat Shimano's best.
Here's the situation in 2013:
- Only Chorus and better are close to the functionality of 1992 ergo levers
- If you're a weight weenie only Chorus and above have carbon brake levers (Centaur has an alloy wrapped in carbon option).
One cog smaller instead of five is a huge deal especially with a compact crank (after running out of larger cogs on the big ring it's a pair of simultaneous lever shoves to arrive at the next gear which is five cogs away with a tight cassettes).
I'd buy Chorus and 11 cogs if that's what it took and am sure plenty of other riders would too. Cassettes would run $105 not $45 (assuming you're not stupid enough to insist on "buying American" when it comes to Italian bicycle components) although it'd be worth it ($100 every four chains and 20,000 miles is not a big deal).
But if they don't sort it out when I need to replace my shifters, I'll probably go with SRAM.
Last edited by Drew Eckhardt; 10-14-12 at 07:57 PM.
#14
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
That's why I'm insistentant on a triple and want a front shifter that handles one well. My current '06 Ergo brifters do and I'd like to have something current that's accommodatinging as they are.
#15
Senior Member
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,341
Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 550 Post(s)
Liked 325 Times
in
226 Posts
They seem to have sold out.
Total cycling has Veloce Ultrashift levers with their E-bay listing saying "2010"
https://www.totalcycling.com/a-z/shif...VELOCE_09.html
I upgraded to 10 cogs with a set of Centaur levers before the supply ran out and bought a pair of the Total Cycling Veloce levers as spares ($125, about $140 shipped) where the net cost is $25/side plus shipping (they come with a $45 cable set and $30 pair of hoods that you'll be buying eventually as they wear out). Campagnolo sells spares for $90 a side and may or may not still have them when you want one.
Total cycling has Veloce Ultrashift levers with their E-bay listing saying "2010"
https://www.totalcycling.com/a-z/shif...VELOCE_09.html
I upgraded to 10 cogs with a set of Centaur levers before the supply ran out and bought a pair of the Total Cycling Veloce levers as spares ($125, about $140 shipped) where the net cost is $25/side plus shipping (they come with a $45 cable set and $30 pair of hoods that you'll be buying eventually as they wear out). Campagnolo sells spares for $90 a side and may or may not still have them when you want one.
Last edited by Drew Eckhardt; 10-15-12 at 12:23 AM.
#16
Senior Member
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,341
Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 550 Post(s)
Liked 325 Times
in
226 Posts
Sure, a 39 or even a 42x25 or 26 will, and has, get me up the climbs I've done in the Rockies but not those in West Virginia, western Maryland or even a couple of miles from my house. How about 20%+ hills? Lots of them. Then there's the age problem. I'm 70.
That's why I'm insistentant on a triple and want a front shifter that handles one well. My current '06 Ergo brifters do and I'd like to have something current that's accommodatinging as they are.
That's why I'm insistentant on a triple and want a front shifter that handles one well. My current '06 Ergo brifters do and I'd like to have something current that's accommodatinging as they are.
2. We'd still be fine with a current Campagnolo 3x11 or 3x10 setup where a lack of trim options could be accommodated by an appropriate front derailleur cage shape and ratio exactly matched to the derailleur.
3. Those of us riding the same 1996 frame and who'd still be running the same 1996 shifters and derailleurs if Campagnolo hadn't discontinued the small parts are not the target market.
Personally I'd buy a bunch of G-spring pairs, about the same number of right spring carriers, one or two thumb lever return springs, and one or two front return springs for your existing right lever before the supply dries up (they're no longer listed as spares). A left pair of G-springs and carrier couldn't hurt although I don't think I ever managed to wear either out.
The little spring on my right front lever failed shortly after the big front spring failed due to fatigue, and that was only available as part of the expensive paddle assembly which is no longer available.
I only had to make one front lever and one thumb spring replacement before it was a lost cause; although I got a premature brake return spring failure after a replacement so having an extra of each couldn't hurt anything.
Last edited by Drew Eckhardt; 10-15-12 at 12:29 AM.
#17
Senior Member
I'd read-up on how the powershift lever works with a triple FD. It sure won't work like the 2006 model or an ultrashift model that has 6 clicks available to operate a triple FD. I suspect the the trim function would be very limited. It only takes a 1-click dump to shift from the big ring to the middle ring and another to shift to the little ring.
If you buy powershift levers, they must be the triple version, not the double crank model.
https://www.campagnolo.com/jsp/en/gro...x3_catid_8.jsp
If you buy powershift levers, they must be the triple version, not the double crank model.
https://www.campagnolo.com/jsp/en/gro...x3_catid_8.jsp
https://www.campagnolo.com/jsp/en/gro...10_catid_2.jsp
#18
Senior Member
How come Campy says the standard Power Torque works for a triple or double?
https://www.campagnolo.com/jsp/en/gro...10_catid_2.jsp
https://www.campagnolo.com/jsp/en/gro...10_catid_2.jsp
Last edited by DaveSSS; 10-15-12 at 07:16 AM.
#19
Senior Member
Join Date: Nov 2008
Location: Hollister, CA
Posts: 3,957
Bikes: Volagi, daVinci Joint Venture
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
These threads always make me very nervous. I've got Campy Chorus on both tandem and single marked QS Micron. I do have a spare set, but I'd be sunk without the large number of FD clicks, at least 9. My tandem is a quad and the single is getting converted to a triple. It doesn't sound like there is a current production equivalent. Might be time to buy a few more spare internal parts.
Fallback position would be to convert the tandem to a triple. I already have a Campy triple FD on the tandem which works extremely well with the quad chainrings. Truth is we only ride the tandem 3000 miles or so per year so we're not likely to wear anything out, although I did manage to break my LH campy shift lever about a year ago.
Fallback position would be to convert the tandem to a triple. I already have a Campy triple FD on the tandem which works extremely well with the quad chainrings. Truth is we only ride the tandem 3000 miles or so per year so we're not likely to wear anything out, although I did manage to break my LH campy shift lever about a year ago.
Last edited by rdtompki; 10-15-12 at 07:27 AM.
#20
Senior Member
None of the current left shift levers could operate a quad crankset, if you need 9 clicks of cable pull, or much more than .6 inch. I have found triple crank users who thought that it required a double swing of the left finger lever to make the little ring to middle ring shift on a triple, but that's a setup error, with too little cable tension. The extra clicks are just taking up cable slack.
The QS feature on the shifter is a change to the front rachet that reduces the amount of dead travel on the finger lever. Earlier models had more finger lever travel, that resulted in no cable pull.
The QS feature on the shifter is a change to the front rachet that reduces the amount of dead travel on the finger lever. Earlier models had more finger lever travel, that resulted in no cable pull.