8 speed DA Uniglide [multi] cassette (s)
#1
Cat 6
Thread Starter
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
8 speed DA Uniglide [multi] cassette (s)
EDIT 2: The 8speed complete cassette with 2nd position and first screw-on cog are SOLD
I do have what remains, but it is 7s and I do not have the proper 1st and 2nd position cog to support its use. The 15t cog and one spacer really isn't applicable to the pinned 5 of 7s cassette, so these are available now as separate purchases. I will request this thread be closed in the near future, and will make proper 7s offerings.
Sorry for any confusion.
Yeah, the thread title is a little odd.
The reason: I have [EDIT: partial 7s and partial 8s] Uniglide cassette positions 3 thru 8, but only one set of positions 2 & 1 DA cogs
So what you get is: EDIT: an astute looker pointed out that the loose spacer on the pinned cogs (set #1) is a 7s, and some more inspection reveals that the 17-28 set is a 7s set. So the loose 15, not being a second position cog, really doesn't go with this set. My guess is that you'd want a 15t second position cog and a 14t screw-on to use this set-up as a 14-28 7 speed cogset. But I don't have either of those.
1: 15, 17, 19, 21, 24, 28 (17-28 are pinned together), and
2. 14, 15, 17, 19, 21, 23 all loose; with
3. 13t second position and 12t screw-on cog
These are used but with life left, and reversible, too
I do have what remains, but it is 7s and I do not have the proper 1st and 2nd position cog to support its use. The 15t cog and one spacer really isn't applicable to the pinned 5 of 7s cassette, so these are available now as separate purchases. I will request this thread be closed in the near future, and will make proper 7s offerings.
Sorry for any confusion.
Yeah, the thread title is a little odd.
The reason: I have [EDIT: partial 7s and partial 8s] Uniglide cassette positions 3 thru 8, but only one set of positions 2 & 1 DA cogs
So what you get is: EDIT: an astute looker pointed out that the loose spacer on the pinned cogs (set #1) is a 7s, and some more inspection reveals that the 17-28 set is a 7s set. So the loose 15, not being a second position cog, really doesn't go with this set. My guess is that you'd want a 15t second position cog and a 14t screw-on to use this set-up as a 14-28 7 speed cogset. But I don't have either of those.
1: 15, 17, 19, 21, 24, 28 (17-28 are pinned together), and
2. 14, 15, 17, 19, 21, 23 all loose; with
3. 13t second position and 12t screw-on cog
These are used but with life left, and reversible, too
Last edited by Ex Pres; 04-20-21 at 02:44 PM.
#3
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,382 Times
in
3,669 Posts
#5
Junior Member
Join Date: Feb 2014
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I got your PM, but you're right - since I'm a newbie I can't email a reply back to you through the Bike Forums relay. Can you PM me again and include your email address with it? Thanks