single speed freewheel versus SS cog
#1
Senior Member
Thread Starter
single speed freewheel versus SS cog
All of my single speeds are conversions on either Shimano XT hubs or Hope hubs. I am running wolftooth, Chris King, and Surly cogs. What's the benefits of a single speed freewheel rear hub besides the better bracing angle of the spokes? do they make any that are 135 spaced and disc brake? For the record I'm a buck 80 and I have never destroyed a wheel so I'm not really concerned about the extra bracing angle of the spokes for me anyways. Just wondered if there was any other advantages or disadvantages?
#2
n00b
Join Date: Jan 2008
Location: Austin, TX
Posts: 1,397
Bikes: Surly Karate Monkey, Twin Six Standard Rando
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 428 Post(s)
Liked 466 Times
in
273 Posts
SS freewheel hubs for mountain bikes: Surly, Paul, White Industries come to mind. Paul seems to be the only one making a boost spaced hub (148mm) for freewheels, too.
I don't really see any advantages to a freewheel. if that's what you have, keep it. if you're building a new wheel, I'd skip it.
you can buy a SS hub that has a HG freehub, which makes fine-tuning the chainline and changing cogs a lot easier than a freewheel. I don't think the "stronger wheel because bracing angles" is really that big a selling point for SS-specific hubs either. my most recent wheel purchase what a I9 1-1 boost hub designed for full 11-speed cassettes and I just put spacers and a Surly cog on it.
I don't really see any advantages to a freewheel. if that's what you have, keep it. if you're building a new wheel, I'd skip it.
you can buy a SS hub that has a HG freehub, which makes fine-tuning the chainline and changing cogs a lot easier than a freewheel. I don't think the "stronger wheel because bracing angles" is really that big a selling point for SS-specific hubs either. my most recent wheel purchase what a I9 1-1 boost hub designed for full 11-speed cassettes and I just put spacers and a Surly cog on it.
#3
Senior Member
Thread Starter
SS freewheel hubs for mountain bikes: Surly, Paul, White Industries come to mind. Paul seems to be the only one making a boost spaced hub (148mm) for freewheels, too.
I don't really see any advantages to a freewheel. if that's what you have, keep it. if you're building a new wheel, I'd skip it.
you can buy a SS hub that has a HG freehub, which makes fine-tuning the chainline and changing cogs a lot easier than a freewheel. I don't think the "stronger wheel because bracing angles" is really that big a selling point for SS-specific hubs either. my most recent wheel purchase what a I9 1-1 boost hub designed for full 11-speed cassettes and I just put spacers and a Surly cog on it.
I don't really see any advantages to a freewheel. if that's what you have, keep it. if you're building a new wheel, I'd skip it.
you can buy a SS hub that has a HG freehub, which makes fine-tuning the chainline and changing cogs a lot easier than a freewheel. I don't think the "stronger wheel because bracing angles" is really that big a selling point for SS-specific hubs either. my most recent wheel purchase what a I9 1-1 boost hub designed for full 11-speed cassettes and I just put spacers and a Surly cog on it.
#4
Guest
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,270 Times
in
1,439 Posts
Likes For Rolla:
#5
Senior Member
Thread Starter
👍 I have Hope hubs on one bike 🙂
Likes For trail_monkey:
#6
Cheerfully low end
Join Date: Jun 2020
Posts: 1,978
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 646 Post(s)
Liked 1,044 Times
in
667 Posts
Otto
Last edited by ofajen; 11-18-20 at 08:33 PM.
#7
Senior Member
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 754
Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 238 Post(s)
Liked 405 Times
in
246 Posts
That Hope hub sounds crazy! If I installed one on my SS I can forget about clothes pinning hockey cards in my spokes
Likes For Speedway2:
#8
Senior Member
Thread Starter
#9
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,558
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4369 Post(s)
Liked 4,009 Times
in
2,676 Posts
I love my White Industries Freewheels but if I had a frame that could accept say a 135mm or 142mm wheel I would probably do a dedicated single speed freehub hub or even a standard cassette hub like Industry Nine. Freewheels are great for my 120 spaced bikes as sometimes I want freewheel and sometimes I want fixed but if I was building my dream Single Speed GravGrav RowdyRandoTiPiper to replace my current Cinelli frame (which I love and have no need to get rid of for the time being) I want more options in case I decide maybe I do want a derailleur on down the line.
#10
Full Member
I like freehubs better because they leave more options for rear cogs and are easier to switch out than a freewheel.