Show me your cruiser.
#727
55+ Club,...
Join Date: Aug 2012
Location: Somewhere in New York, NY
Posts: 4,332
Bikes: 9+,...
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 1117 Post(s)
Liked 851 Times
in
595 Posts
A picture of my big old Puma Nevis (Biomega) crank forward bike. It's an Shimano Nexus 8 speed IGH conversion. It originally had a derailleur and 8 speeds, and now just has a chain tensioner. Pretty trouble free,...except for the 1 flat I recently had (old innertube).
__________________
If it wasn't for you meddling kids,...
Likes For tds101:
#728
Newbie
Join Date: Apr 2014
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Torker Blue Thunder
I can't seem to find anything about this bike.
Anyone haveFormatFactoryunnamed.jpg any info?
Anyone haveFormatFactoryunnamed.jpg any info?
#730
Newbie
Join Date: Oct 2017
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hi guys, first post here
Thought I'd share my find. I found this Indy frame a few years ago at a local repair shop lying in a corner among some scrap parts ready to be thrown away. Paid 15€ for it. Thought I'd start another project, although I have more than enough unfinished projects already
As I later found out, the frame had two cracks - one big one, going around the welding line where the seat tube meets the BB, and the other smaller one on the chainstay right next to the first one. I got it fixed, but then I shifted to my other projects and this one was left to wait for its turn. And it is still waiting But I thought I'll share it with you guys and in that way I might eventually get my lazy ass to finally finish the build for next summer
Thought I'd share my find. I found this Indy frame a few years ago at a local repair shop lying in a corner among some scrap parts ready to be thrown away. Paid 15€ for it. Thought I'd start another project, although I have more than enough unfinished projects already
As I later found out, the frame had two cracks - one big one, going around the welding line where the seat tube meets the BB, and the other smaller one on the chainstay right next to the first one. I got it fixed, but then I shifted to my other projects and this one was left to wait for its turn. And it is still waiting But I thought I'll share it with you guys and in that way I might eventually get my lazy ass to finally finish the build for next summer
#731
Full Member
1961 Flying Star. I have a rack and headlight on it now. Blue, but it will do.
Someday ill find a TANK!
2017-10-12 00.35.58 by Norcal Mike, on Flickr
2018 Mike Buff Big Ripper
IMG_20170710_122043_183 by Norcal Mike, on Flickr
Someday ill find a TANK!
2017-10-12 00.35.58 by Norcal Mike, on Flickr
2018 Mike Buff Big Ripper
IMG_20170710_122043_183 by Norcal Mike, on Flickr
Last edited by norcalmike; 10-12-17 at 01:48 AM.
#732
Calamari Marionette Ph.D
#733
Full Member
#734
Calamari Marionette Ph.D
#735
Member
Join Date: Aug 2017
Posts: 35
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 27 Times
in
9 Posts
Nirve Beach 7. Changed some parts to make it lighter, almost 6 lbs lighter than stock. next some drivetrain mods to make climbing moderate hills easier. Need to clean up the cables after changing the handlebars to riser style MTB.
Last edited by ed h; 06-19-20 at 10:02 AM. Reason: image not showing
Likes For ed h:
#736
Full Member
Here's my old klunker.
Its so rusty, I had to clear coat it to keep metal from flaking off. Real safe.
Unknown frame with Schwinn forks and cranks. Generic wheels. SR BMX neck
Need to ride this bad boy again
20171012_090519 by Norcal Mike, on Flickr
Its so rusty, I had to clear coat it to keep metal from flaking off. Real safe.
Unknown frame with Schwinn forks and cranks. Generic wheels. SR BMX neck
Need to ride this bad boy again
20171012_090519 by Norcal Mike, on Flickr
#738
Senior Member
Bildabike and 3G
Cruising down the beach today I came across this fort someone built. The 3G is the cruiser I plucked from a junk pile and found this site to learn how to fix it. Many thanks for the instructions and tips. Both hubs, headset, and bb are rebuilt. All the rattle parts removed thanks to SP. This cruiser rolls thru many beach miles and rarely complains.
Last edited by Nighttrain; 10-14-17 at 03:16 PM.
#741
Proud hobo biker
Join Date: Nov 2014
Location: Schertz - New Braunfels area
Posts: 804
Bikes: 2019 Surly Ogre, 2016 Giant Anyroad 2, Lightspeed Roadrunner trike, SE Tripel (in process)
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
The 3G is the cruiser I plucked from a junk pile and found this site to learn how to fix it. Many thanks for the instructions and tips. Both hubs, headset, and bb are rebuilt. All the rattle parts removed thanks to SP. This cruiser rolls thru many beach miles and rarely complains.
#742
Senior Member
#743
Junior Member
Join Date: Sep 2017
Posts: 24
Bikes: Peugeot SS conversion, Nashbar SS 29er, Fuji Touring 3, Murray Sebring w/Ape Hangers
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Maxxis tires never fail to accent bikes perfectly. They almost got me more than the Thickslick logo does but not quite.
#744
Junior Member
Join Date: Sep 2017
Posts: 24
Bikes: Peugeot SS conversion, Nashbar SS 29er, Fuji Touring 3, Murray Sebring w/Ape Hangers
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's my old klunker.
Its so rusty, I had to clear coat it to keep metal from flaking off. Real safe.
Unknown frame with Schwinn forks and cranks. Generic wheels. SR BMX neck
Need to ride this bad boy again
20171012_090519 by Norcal Mike, on Flickr
Its so rusty, I had to clear coat it to keep metal from flaking off. Real safe.
Unknown frame with Schwinn forks and cranks. Generic wheels. SR BMX neck
Need to ride this bad boy again
20171012_090519 by Norcal Mike, on Flickr
Love bikes like this that are like a functional time capsule!
#745
Full Member
standard issue Krylon rattle can from my local hardware store. took about 4 coats but one can did the job. I think I used gloss buy flat would have been fine too for this. Depends on how shiney you want it.
#746
Calamari Marionette Ph.D
Here's my old klunker.
Its so rusty, I had to clear coat it to keep metal from flaking off. Real safe.
Unknown frame with Schwinn forks and cranks. Generic wheels. SR BMX neck
Need to ride this bad boy again
20171012_090519 by Norcal Mike, on Flickr
Its so rusty, I had to clear coat it to keep metal from flaking off. Real safe.
Unknown frame with Schwinn forks and cranks. Generic wheels. SR BMX neck
Need to ride this bad boy again
20171012_090519 by Norcal Mike, on Flickr
That bike is crying inside. It's very very sad. It wants you to take those damn reflectors of it's wheels so it can look like a real Klunker.
#747
Senior Member
#748
Full Member
#749
Member
Join Date: Aug 2017
Posts: 35
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 27 Times
in
9 Posts
yes, I choose the Nirve cruiser for its frame design. Sort of looks likes a modernized Schwinn DX style prewar cruiser. Looking to build a cruiser that has an older look but with newer parts. Was really hoping to find a second hand Gary Fisher Klunker or Breezer Ignaz X, but no such luck. Both bikes were made 20 years ago and probably not in great numbers, and for whatever reason don't seem to come for sale all that often.
#750
Senior Member
My 1963 Chicago Schwinn.
Likes For FolderBeholder: