Cino bound Bianchi
#1
Lost
Thread Starter
Cino bound Bianchi
Figured I would chronicle my build here too for anyone interested and hopefully to pick up some tips along the way
Not even sure what model Bianchi this is, but it has rack and fender mounts, so I am hopeful it will accommodate bigger than racing tires. Bought it several years ago, but has sit unbuilt waiting for a good excuse. Cino sounds like a good one. Wish it had DT shifter stops, but I'll work with what I've got. The shaping on the mega-pro tubing, especially the DT is pretty cool. Excuse the cluttered work bench.
Not even sure what model Bianchi this is, but it has rack and fender mounts, so I am hopeful it will accommodate bigger than racing tires. Bought it several years ago, but has sit unbuilt waiting for a good excuse. Cino sounds like a good one. Wish it had DT shifter stops, but I'll work with what I've got. The shaping on the mega-pro tubing, especially the DT is pretty cool. Excuse the cluttered work bench.
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
Likes For AngryScientist:
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
That bench is neater than mine. You might want to mock up some wheels and tires first to figure out what size tires you can mount on the bike. Good looking project for sure.
Likes For bikemig:
#3
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,803 Times
in
2,286 Posts
Likes For gugie:
#4
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
Well, it’s got rack and fender mounts, so likely it was intended to use larger tires.
Might want to go 650b, tho.
Bar ends (friction, of course) are perfectly acceptable for Cino.
Should build up into a decent ride.
Might want to go 650b, tho.
Bar ends (friction, of course) are perfectly acceptable for Cino.
Should build up into a decent ride.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#5
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Agreed that it should take larger tires than a racing bike, but it can't hurt to check before building the bike. The OP may have a tire size in mind that he wants to work for the ride he has in mind.
#6
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,886
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1453 Post(s)
Liked 2,196 Times
in
963 Posts
Looking forward to watching your build.
But is there a date and open registration for Cino?
But is there a date and open registration for Cino?
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#7
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
There's a date- July 22-23, and a caterer, but the web site has not yet been updated.
You might want to text me if you're thinking of going.
You might want to text me if you're thinking of going.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
Likes For rccardr:
#8
Lost
Thread Starter
I've heard of people riding cino on 25's, so whatever fits will have to do!
Here are the freshly gutted levers in line with the rat rod build ahead
Here are the freshly gutted levers in line with the rat rod build ahead
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
Likes For AngryScientist:
#9
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,680
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2326 Post(s)
Liked 4,999 Times
in
1,781 Posts
Nice, keep us posted as it goes along.
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#10
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
Looks similar to my Bianchi Trofeo which does not have much clearance, however mine lacks the cable guides on head tube. Still, Gravel Kings are available in 26mm. Don
#11
Lost
Thread Starter
worst case scenario: i wind up riding montana dirt roads and drinking bottles of wine by myself....doesnt sound so bad!
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
Likes For AngryScientist:
#12
Lost
Thread Starter
hill approved: 46/30 campag.
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
Likes For AngryScientist:
#13
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,680
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2326 Post(s)
Liked 4,999 Times
in
1,781 Posts
#14
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
Keep the pics coming. I like the build and the attitude; just ride whatever tire fits the frame and call it good.
Likes For bikemig:
#15
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
#16
Lost
Thread Starter
Hey James. It's a triple crank that I converted to a sub-compact double. In this case, the big ring needs to be installed on the inboard side of the big spider. If it was installed outboard, there would be a very large gap to the small ring and the chain would fall off between the two rings in that case. I've modified a few cranks in this manner and they work perfectly. They do, as you point out, look a little "off", but function>form for this build.
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
#17
Senior Member
Join Date: Aug 2010
Location: Utah
Posts: 8,680
Bikes: Paletti,Pinarello Monviso,Duell Vienna,Giordana XL Super,Lemond Maillot Juane.& custom,PDG Paramount,Fuji Opus III,Davidson Impulse,Pashley Guv'nor,Evans,Fishlips,Y-Foil,Softride, Tetra Pro, CAAD8 Optimo,
Mentioned: 156 Post(s)
Tagged: 0 Thread(s)
Quoted: 2326 Post(s)
Liked 4,999 Times
in
1,781 Posts
Hey James. It's a triple crank that I converted to a sub-compact double. In this case, the big ring needs to be installed on the inboard side of the big spider. If it was installed outboard, there would be a very large gap to the small ring and the chain would fall off between the two rings in that case. I've modified a few cranks in this manner and they work perfectly. They do, as you point out, look a little "off", but function>form for this build.
That makes sense!
__________________
Steel is real...and comfy.
Steel is real...and comfy.
#18
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,639
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4682 Post(s)
Liked 5,803 Times
in
2,286 Posts
This year! We ain't getting any younger!
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#19
Lost
Thread Starter
Little progress here, more silvery parts hung. Coming together nicely.
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
#20
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,053
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4513 Post(s)
Liked 6,389 Times
in
3,674 Posts
Hey James. It's a triple crank that I converted to a sub-compact double. In this case, the big ring needs to be installed on the inboard side of the big spider. If it was installed outboard, there would be a very large gap to the small ring and the chain would fall off between the two rings in that case. I've modified a few cranks in this manner and they work perfectly. They do, as you point out, look a little "off", but function>form for this build.
Asking for a friend.
All good, dig the vibe but I would have to do something about the ledge, like have the big gear there.
Or bevel it or have spacer and bevel/shape it somehow.
#21
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,780
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1678 Post(s)
Liked 3,099 Times
in
914 Posts
Nicely done Nick! I think there might be a 3D print application to cover that outer spider bit. Maybe something in Celeste …
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
#22
Lost
Thread Starter
Clearance check: These Vittoria Corsas are labeled 32, but measure out to 30mm on old school Ambrosio rims, and clear all areas. These are probably the tires I'll wind up on.
__________________
https://less-than-epic.blogspot.com/
https://less-than-epic.blogspot.com/
#23
Senior Member
Join Date: May 2019
Location: Burien WA
Posts: 512
Bikes: Cannondale Synapse, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn "Paramount" PDG, '83 Trek 640
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 268 Post(s)
Liked 325 Times
in
211 Posts
Do you know of anything? I have a Dura Ace 7900 crankset that I'm running normal chainrings on and they work great, but have a weird gap where the arms are supposed to blend into the (dedicated and extremely pricey) matching chainrings.
#24
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,869 Times
in
1,439 Posts
__________________
My Bikes
My Bikes
#25
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,735
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2155 Post(s)
Liked 3,406 Times
in
1,206 Posts
I'm with SL. Saw a photo of outer ring mount caps used on a build maybe a year or two ago. Have not been able to locate any source, however.
Might have been custom machined or 3D printed...
Might have been custom machined or 3D printed...
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...