Bob Jackson $100?
#1
Junior Member
Thread Starter
Join Date: Jul 2019
Location: Souderton PA
Posts: 14
Bikes: Kilo WT, Bob Jackson
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Bob Jackson $100?
Hey Guys,
This sounds to me like a no brainer, but maybe I'm missing something? Looking at a small Bob Jackson with suntour Cyclone group. Seller says that the "spring detents on the shifter are not strong enough" and it needs new shifters? I come from the fixed gear world so Im not familiar enough to know if this is a muffler bearing situation or an actual issue. At $100 I figure I cant go wrong but wanted a second opinion. FWIW frame looks like is scratched and dirty but not bent/dented.
Thanks in advance!
This sounds to me like a no brainer, but maybe I'm missing something? Looking at a small Bob Jackson with suntour Cyclone group. Seller says that the "spring detents on the shifter are not strong enough" and it needs new shifters? I come from the fixed gear world so Im not familiar enough to know if this is a muffler bearing situation or an actual issue. At $100 I figure I cant go wrong but wanted a second opinion. FWIW frame looks like is scratched and dirty but not bent/dented.
Thanks in advance!
#2
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
No brainer unless it's a stolen bike. For that price, that is a concern.
#3
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18373 Post(s)
Liked 4,508 Times
in
3,351 Posts
@HankHeel, You can post some pictures to your Bike Forums Albums.
https://www.bikeforums.net/g/user/502793
Does the bike fit? Do want/need it?
A lot of vintage parts can be replaced or upgraded. Or sometimes just tightened.
It sounds like it is probably a good deal if the bike fits.
https://www.bikeforums.net/g/user/502793
Does the bike fit? Do want/need it?
A lot of vintage parts can be replaced or upgraded. Or sometimes just tightened.
It sounds like it is probably a good deal if the bike fits.
#4
Junior Member
Thread Starter
Join Date: Jul 2019
Location: Souderton PA
Posts: 14
Bikes: Kilo WT, Bob Jackson
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Thanks guys. Its for the wife, it should be close but I dont have geo specs on it and havent gotten my hands on it so I cant say for sure. I think at this price I can either make it fit or resell and make a couple dollars towards one that does fit nicely. If I grab it tonight Ill add some photos for you.
Last edited by HankHeel; 10-16-19 at 02:43 PM. Reason: Left out a sentence
#5
Senior Member
Join Date: Nov 2014
Location: Eugene, Oregon, USA
Posts: 27,547
Mentioned: 217 Post(s)
Tagged: 0 Thread(s)
Quoted: 18373 Post(s)
Liked 4,508 Times
in
3,351 Posts
There are deals that are so hot that one shouldn't spend the time to post them on then internet when you should be on your way to pick up the bike.
#6
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,517
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
Should be a great deal shifter's likely only need adjusting if not you can pic up a nice shift group that should work with this bike for less than $50 so not a big deal.
#7
Junior Member
Thread Starter
Join Date: Jul 2019
Location: Souderton PA
Posts: 14
Bikes: Kilo WT, Bob Jackson
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Well I bought it! I dont know if the link will work but Ill include the link to the listing. Paint is rough but not missing anywhere. Shifters definitely need some work. Bars need changed, but it has a carbon fork Ill swap out for the original. All in all I think it was a good deal, thanks for pushing me over the edge guys.
#8
incazzare.
Good deal? It was a great deal if it's authentic and not destroyed!
__________________
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
1964 JRJ (Bob Jackson), 1973 Wes Mason, 1974 Raleigh Gran Sport, 1986 Schwinn High Sierra, 2000ish Colian (Colin Laing), 2011 Dick Chafe, 2013 Velo Orange Pass Hunter
#12
Junior Member
Thread Starter
Join Date: Jul 2019
Location: Souderton PA
Posts: 14
Bikes: Kilo WT, Bob Jackson
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
It worked. Sorry for my messy basement. Carbon fork is for sale, putting original back on. Also bars and levers are going. Want to update the drivetrain as well.
#14
Junior Member
Thread Starter
Join Date: Jul 2019
Location: Souderton PA
Posts: 14
Bikes: Kilo WT, Bob Jackson
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
Yes it actually fits my wife, with a little less seat post than in the photo. Im 5'9" and the guy I bought it off of said it was just too small for him, him being a few inches taller than me.
Likes For HankHeel:
#16
Senior Member
Join Date: Oct 2010
Posts: 8,515
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 3241 Post(s)
Liked 2,512 Times
in
1,510 Posts
Thread title sounds like a Jeopardy question. "Yes Alex, I'll take Bob Jackson for $100.
#17
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
#18
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,517
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
I think you did good even if you end up changing out some of the lesser components and wheel set for something a little more appropriate for this level frame set. This bike really should have a nicer wheel set and a fairly decent indexed component group. You won't be under water if you keep the build under $500 or so you have a lot of room value wise to work with.
#19
Junior Member
Thread Starter
Join Date: Jul 2019
Location: Souderton PA
Posts: 14
Bikes: Kilo WT, Bob Jackson
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 4 Times
in
4 Posts
I think you did good even if you end up changing out some of the lesser components and wheel set for something a little more appropriate for this level frame set. This bike really should have a nicer wheel set and a fairly decent indexed component group. You won't be under water if you keep the build under $500 or so you have a lot of room value wise to work with.
#20
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,396
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,696 Times
in
2,517 Posts
why is there a downtube cable stop? Scares me a little about the mechanical ability of the previous owner. Too bad the fork was swapped out
More concerning is using a seat collar as a spacer on the head tube. Might be worth having a bike shop assess that part of the bike.
More concerning is using a seat collar as a spacer on the head tube. Might be worth having a bike shop assess that part of the bike.
#21
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4511 Post(s)
Liked 6,378 Times
in
3,667 Posts
#22
Member
That set of black cyclone derailleurs alone sell for close to the price of the bike. Great buy
#23
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,517
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
why is there a downtube cable stop? Scares me a little about the mechanical ability of the previous owner. Too bad the fork was swapped out
More concerning is using a seat collar as a spacer on the head tube. Might be worth having a bike shop assess that part of the bike.
More concerning is using a seat collar as a spacer on the head tube. Might be worth having a bike shop assess that part of the bike.