Shocks from ebike??
#1
Junior Member
Thread Starter
Join Date: Aug 2019
Posts: 6
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Shocks from ebike??
Hi!
About a month or so ago, I was riding on my ebike from Cyclotricity that is a couple years old.
And while riding, I squeezed the brake pedals and I felt some shock currents on my hands.
Ever since, it's happening every so often whenever I use the brakes.
I can't seem to diagnose the issue, and my temporary solution is to wrap some electrical tapes around the brake pedals.
Would love to hear some ideas. CHeers!
About a month or so ago, I was riding on my ebike from Cyclotricity that is a couple years old.
And while riding, I squeezed the brake pedals and I felt some shock currents on my hands.
Ever since, it's happening every so often whenever I use the brakes.
I can't seem to diagnose the issue, and my temporary solution is to wrap some electrical tapes around the brake pedals.
Would love to hear some ideas. CHeers!
#3
Cycleway town
Use insulated toe clips
#4
Senior Member
Join Date: Jul 2015
Location: Chicago Suburbs
Posts: 1,406
Bikes: GT Transeo & a half dozen ebike conversions.
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 340 Post(s)
Liked 275 Times
in
192 Posts
The motor/control circuits are isolated from the bike, but there is the battery voltage (30-55 V DC) and an AC component from the motor that could possibly leak out. Most people cannot feel the DC, but add the AC and it will tingle. Wonder if it's going between the two brake levers. That could be bad.
Are the brake levers bare metal or painted/anodized? I'd try to see if my voltmeter could measure anything between each lever on AC/DC. Maybe disconnect the brake sensors.
Are the brake levers bare metal or painted/anodized? I'd try to see if my voltmeter could measure anything between each lever on AC/DC. Maybe disconnect the brake sensors.