Using road triple as a double?
#1
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
Using road triple as a double?
I want to change my 130BDC Shimano Exage Motion double crankset to a 110BDC double crankset. I have a Shimano RSX road triple that I was planning on useing without the smallest ring. Am I right in assuming the existing bottom bracket leangth will still work? thanks.
#2
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Don't see why not, just adjust your lower limit and you're set.
#3
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
I searched a bit and all the disscussions where about dropping the small chain ring from an existing set up.
#4
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
I guess it's not clear what your objective is. Are you looking for a 44-48 t and 34-38 t double versus a 52-38? Do you need to drop the granny gear for weight?
Swapping cranksets from double to triple shouldn't affect your chainline much, but I'd imagine that an indexed shifter would be tricky to set up that way. Piece of cake with friction though.
Swapping cranksets from double to triple shouldn't affect your chainline much, but I'd imagine that an indexed shifter would be tricky to set up that way. Piece of cake with friction though.
#5
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
54+40t, Swapped for 48+34t chainrings, with out changeing bottom bracket is the objective. I have the rings and the RSX triple crankset.
#6
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
Shimano has technical documents for their equipment going back years that covers installation, adjustment, and specifications. Other manufacturers are the same. BB width is more defined by the frame than the crank. Read up on chainline. Your swap is likely to shift your effective chainline to the right a few mm, since shimano uses the center of a crankset to determine chainline. That's over the middle ring in a triple, and halfway between the two rings on a double. The threads about chainline should give you an idea about what to look for and expect.
#7
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
Looking up all the specs, it looks like the tripple is speced for a 118mm bottom bracket and the double a 115mm. Figuring 8mm chainring spaceing theory put everything in the 1 mm close enough zone. I was hopeing to leave the deraileur height alone as this might be a temporary change. The new large ring will have 4 less teath. Im not sure how much that changes the radius.
PS. Google tells me the diferance is 8mm, so dropping the deraileur is probably a good idea.
PSS. I found some more info and i'm going to drop off speculating till I get all the parts in hand.
PS. Google tells me the diferance is 8mm, so dropping the deraileur is probably a good idea.
PSS. I found some more info and i'm going to drop off speculating till I get all the parts in hand.
Last edited by bark_eater; 08-29-19 at 06:12 AM.
#8
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
#9
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
From your above posting your big chainring is going to be 6 teeth smaller (54T to 48T) and that is a huge change in radius. Lowering the front derailleur will be essential to get decent shifting.
#10
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
I was using a phone the last couple of days and mixed up some of the numbers. I'm going from 52t to 48t, so I think thats about an 8mm reduction in radius. I also wasn't looking at the bottom bracket specifications correctly. I haven't dug out the RSX crank yet to confirm the exact model, but the Shimano literature is listing a 8mm bottom bracket difference between a double and triple RSX crank sets which is basically the same as the chain ring spacing, so that's promising.
#11
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
Got a follow up question: eyeballing the RSX crank against the present Exage road crankset, it looks like I will need to rmove the small ring mounting posts to clear the chainstay. Any reason not to take them off? Also I was comparing the RSX crank to an Exage R500? mountain crank and it looks like they have about the same Q factor. Besides weight, is there any functional difference between road and mountain cranks with the same Q factor and crank leangth?
#12
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
Got a follow up question: eyeballing the RSX crank against the present Exage road crankset, it looks like I will need to rmove the small ring mounting posts to clear the chainstay. Any reason not to take them off? Also I was comparing the RSX crank to an Exage R500? mountain crank and it looks like they have about the same Q factor. Besides weight, is there any functional difference between road and mountain cranks with the same Q factor and crank leangth?
There is no guarantee at all that mounting the RSX's crank on the Exage's bottom bracket will result in the correct chainline, or satisfactory Q factor, either. BB's aren't expensive or hard to remove/install.
#13
Senior Member
Thread Starter
Join Date: Sep 2017
Location: Eastern Shore, MD
Posts: 2,107
Bikes: Road ready: 1993 Koga Miyata City Liner Touring Hybrid, 1989 Centurion Sport DLX, "I Blame GP" Bridgestone CB-1. Projects: Yea, I got a problem....
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 753 Post(s)
Liked 737 Times
in
422 Posts
Just wanted to follow up on this. The 110bdc RSX tripple works fine as a double. Chain line seems to be the same as the original crank set. Curiously the original cranks chainine was noticeably different when I swapped the original 130 bdc steel biopace rings for sugino and willow rings
Last edited by bark_eater; 10-11-19 at 04:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
max5480
Road Cycling
14
10-01-11 10:11 AM
3373jones
Road Cycling
10
01-31-11 08:12 AM