Sheldon Brown's fixed cup removal method
#1
Senior Member
Thread Starter
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
Sheldon Brown's fixed cup removal method
I thought this one would never come out. Lightrace fixed cup installed in the frame for 70 years. And it's French thread. Grabbing the flats in the vise didn't work. The flats would deform slightly and the frame would jump out of the vise.
So on to Sheldon's method. 1/2" bolt, nut, and washers. Socket wrench with a 16" handle on the non-driveside. Top tube under the armpit. Pulled up and it came loose with only moderate effort. The power of friction!
So on to Sheldon's method. 1/2" bolt, nut, and washers. Socket wrench with a 16" handle on the non-driveside. Top tube under the armpit. Pulled up and it came loose with only moderate effort. The power of friction!
Likes For TenGrainBread:
#2
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,031
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4509 Post(s)
Liked 6,374 Times
in
3,666 Posts
This is why I ALWAYS R+R the DS cup with any and all BB service.
All new acquisitions get a service just for this reason.
Glad you got it out with all your appendages intact.
All new acquisitions get a service just for this reason.
Glad you got it out with all your appendages intact.
Likes For merziac:
#3
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,601
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3869 Post(s)
Liked 6,454 Times
in
3,192 Posts
I've had to do a few things for this to work consistently, like backing-off the nut and re-lubing the bolt threads before trying again. It can be rather difficult to separate the assembly after the cup comes loose.
#4
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1300 Post(s)
Liked 1,900 Times
in
1,136 Posts
Sheldon's method again reminds me that long ago there was a Var tool that used the same principle to remove the fixed cup. A friend and bike shop owner here in town lamented to me that the tool could not be found anywhere and she wanted another one. Maybe it is time for me to get some parts and go do some welding to make a new tool for her. Thanks for the reminder. Looks like another project for the Stay In Place order I'm under. Thanks, MH
#5
Senior Member
Join Date: Dec 2005
Posts: 17,146
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,639 Times
in
2,602 Posts
I have a Stein fixed-cup wrench clamp:
https://www.steintool.com/portfolio-...-wrench-clamp/
i picked it up cheap on eBay years ago from a seller who didn’t know what it was. It allows me to bang on the fixed-cup tool with a hammer or to use a long lever on the end of the wrench. Very effective.
https://www.steintool.com/portfolio-...-wrench-clamp/
i picked it up cheap on eBay years ago from a seller who didn’t know what it was. It allows me to bang on the fixed-cup tool with a hammer or to use a long lever on the end of the wrench. Very effective.
#6
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,031
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4509 Post(s)
Liked 6,374 Times
in
3,666 Posts
It's all about leverage and the control of it.
This has never failed or damaged any parts, tools, frames or flesh.
This has never failed or damaged any parts, tools, frames or flesh.
#7
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1300 Post(s)
Liked 1,900 Times
in
1,136 Posts
Merziac,
I sure hope that is an Italian cup you are prying on! yikes! Smiles, MH
I sure hope that is an Italian cup you are prying on! yikes! Smiles, MH
#8
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,031
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4509 Post(s)
Liked 6,374 Times
in
3,666 Posts
I have done this on purpose several times on stubborn ones just to crack them loose. Some of them will actually crack loose easier when going the wrong way to start with.
Like I said, this method never fails or hurts anything, ever.
#9
Senior Member
I just had to cobble something together for this operation on 2 Italian BBs today. I used a long, 1/2 inch bolt, with the head and some fender washers on the NDS, and a 4 X 4 piece of MDf I had laying around with a Tee nut in it. I put a 12" crescent wrench on the flats, tightened the bolt with a ratchet, and gently (or using a hammer as the case may be) teased the fixed cup loose. I was too busy to take pictures, so you are going to have to imagine it! Not pretty, but it sure did work, and one of those BBs was tight, perhaps Locktited! It is days like this that i wish i had a professional Park repair stand, the home version always wants to move away, or fold up when i torque on something.
#10
Senior Member
Sheldon's method again reminds me that long ago there was a Var tool that used the same principle to remove the fixed cup. A friend and bike shop owner here in town lamented to me that the tool could not be found anywhere and she wanted another one. Maybe it is time for me to get some parts and go do some welding to make a new tool for her. Thanks for the reminder. Looks like another project for the Stay In Place order I'm under. Thanks, MH
To make one I think you'd need a lathe and a milling machine, not a welder.
The Sheldon method seems a little crude to me, but it obviously works. The above tools don't work the same way, since friction isn't used to grab the cup. VAR never made a friction tool that I'd ever heard of, but of course it's possible I missed it.
* Maybe there was a Hozan knockoff also. Can't remember.
Likes For Salamandrine:
#11
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,696
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1946 Post(s)
Liked 2,004 Times
in
1,105 Posts
I used the Sheldon Brown method on a very stubborn Italian cup. Used a long 1/2 inch drive socket and a cheater bar. Very scary. THEN I had to take the cup with attached Sheldon apparatus to the auto shop guys at school to rescue the cup. It was too tight for my shop to handle.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#12
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,793
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1390 Post(s)
Liked 1,322 Times
in
835 Posts
That pic was just a setup pic, aside from that it doesn't matter one wit, if by chance you are going the wrong way it simply cracks loose then you reverse direction and spin it right off, easy, peasy.
I have done this on purpose several times on stubborn ones just to crack them loose. Some of them will actually crack loose easier when going the wrong way to start with.
I have done this on purpose several times on stubborn ones just to crack them loose. Some of them will actually crack loose easier when going the wrong way to start with.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#13
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,777
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3582 Post(s)
Liked 3,394 Times
in
1,928 Posts
Zeus did have a professional-grade friction-type fixed cup tool; you can see it in the lower right of the case:
Others were also available:
#14
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,031
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4509 Post(s)
Liked 6,374 Times
in
3,666 Posts
With the leverage of this method, there is never a need for jerking or hammering, no collateral damage from shock and awe, just slow, steady brute force.
#15
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,031
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4509 Post(s)
Liked 6,374 Times
in
3,666 Posts
I used the Sheldon Brown method on a very stubborn Italian cup. Used a long 1/2 inch drive socket and a cheater bar. Very scary. THEN I had to take the cup with attached Sheldon apparatus to the auto shop guys at school to rescue the cup. It was too tight for my shop to handle.
#16
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,772
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2434 Post(s)
Liked 3,107 Times
in
1,957 Posts
That ought to be an interesting parts list there...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#17
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,031
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4509 Post(s)
Liked 6,374 Times
in
3,666 Posts
Both setups were sourced from things already on hand, the hole and sockets for spacers came for the NDS setup when someone asked about how to do that side.
Also have a thinwall pipe with a flattened end that fits the BB wrench for way more leverage than is ever needed.
Also have a thinwall pipe with a flattened end that fits the BB wrench for way more leverage than is ever needed.
#18
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1300 Post(s)
Liked 1,900 Times
in
1,136 Posts
I don't recall that VAR had a friction-type fixed cup tool. They did have the VAR-30, but that uses a jaw to hold the cup. You don't have to crank the pieces together super-tight, just enough to keep the jaw in place:
Zeus did have a professional-grade friction-type fixed cup tool; you can see it in the lower right of the case:
Others were also available:
Zeus did have a professional-grade friction-type fixed cup tool; you can see it in the lower right of the case:
Others were also available:
The tool I am remembering was a two piece tool similar to the Zeus one pictured. It was black steel and threaded into each other, and only had two flats on each end. You wrenched the two pieces together sandwiching the bottom bracket cup in between them,and then turned the tool with a wrench on the flats of either end. Depending on the thread pattern you either turned the drive side or the non drive side to remove the cup. Smiles, MH
#19
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,772
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2434 Post(s)
Liked 3,107 Times
in
1,957 Posts
I am still having a devil of a time removing a fixed cup, even with the hozan tool I have. I might try to tighten-loose method, but I have sprayed all sorts of crap and it has yet to budge. And yes, I am loosening in the correct direction...
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#20
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,940
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 1300 Post(s)
Liked 1,900 Times
in
1,136 Posts
Dawg,
Help this old stoopid brother out, and tell him what you are working on. There are a few work around as have been discussed here. Sometime I have seen outer races that have been worn to the point that the metal from the cup is stretched into the bottom bracket shell. These are the worst offenders, and even break apart during removal. Then you have to cut the old bits out with a Dremel tool. Then chase the threads before any reconstruction can begin. It would help if a pic was posted. Smiles, MH
Help this old stoopid brother out, and tell him what you are working on. There are a few work around as have been discussed here. Sometime I have seen outer races that have been worn to the point that the metal from the cup is stretched into the bottom bracket shell. These are the worst offenders, and even break apart during removal. Then you have to cut the old bits out with a Dremel tool. Then chase the threads before any reconstruction can begin. It would help if a pic was posted. Smiles, MH