FS: Unique 4x8" Round Leather Saddle Bags
#1
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
FS: Unique 4x8" Round Leather Saddle Bags
Hello folks!
(EDIT - these are both sold now! Cheers!)
These saddle bags are completely hand-crafted from vegetable tanned leather with copper rivets and buckles, and are carved, stained, and waxed. Each one has 4" round sides of 3-4mm thickness, and the main piece and straps are cut from the same 1.5-2mm thick leather. The straps are completely detachable as they are just slotted into the bags, making for easy replacement over time. There are minor imperfections in the stitching and tooling marks here and there, but overall each bag presents very nicely and is of the same fine quality that my patrons have admired for nearly a decade.
The sizing is based on my desire to have bags that can fit a flat repair kit, a spare tube, a multi-tool, a protein bar or other small snack, a phone, and a wallet - typical necessities without cutting corners. I am often grieved to find that I have to take cards out of my wallet before a ride, or downsize my key fob, or leave a spare tube or snack behind, with the slightly smaller bags that are so common on the market.
These are no more waterproof than most natural leather products, although the wax balm used as a final step to seal the finish provides some protection. Any usual waterproofing spray will help, but I would recommend trying to keep the bags dry as much as possible, for obvious reasons...
-Gregory
(EDIT - these are both sold now! Cheers!)
These saddle bags are completely hand-crafted from vegetable tanned leather with copper rivets and buckles, and are carved, stained, and waxed. Each one has 4" round sides of 3-4mm thickness, and the main piece and straps are cut from the same 1.5-2mm thick leather. The straps are completely detachable as they are just slotted into the bags, making for easy replacement over time. There are minor imperfections in the stitching and tooling marks here and there, but overall each bag presents very nicely and is of the same fine quality that my patrons have admired for nearly a decade.
The sizing is based on my desire to have bags that can fit a flat repair kit, a spare tube, a multi-tool, a protein bar or other small snack, a phone, and a wallet - typical necessities without cutting corners. I am often grieved to find that I have to take cards out of my wallet before a ride, or downsize my key fob, or leave a spare tube or snack behind, with the slightly smaller bags that are so common on the market.
These are no more waterproof than most natural leather products, although the wax balm used as a final step to seal the finish provides some protection. Any usual waterproofing spray will help, but I would recommend trying to keep the bags dry as much as possible, for obvious reasons...
-Gregory
Last edited by Kilroy1988; 09-18-20 at 11:40 AM.
Likes For Kilroy1988:
#2
Senior Member
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 1,398
Bikes: Trek 720, Trek 620, Trek 520, Steel Schwinns, AD Puch, Kona, Nishiki Pro, All City Disc Spacehorse, Waterford
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 101 Times
in
52 Posts
Saddle Bags
Love them!!
They are larger than the Brooks I use.
But not so large as to be distracting.
The Brooks can fit only tire tools, a spare tube, and precious little else.
Very Nice!!!
They are larger than the Brooks I use.
But not so large as to be distracting.
The Brooks can fit only tire tools, a spare tube, and precious little else.
Very Nice!!!
Likes For jjames1452:
#3
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
Handsome bags!
#4
Senior Member
Join Date: Oct 2005
Location: Upper Left, USA
Posts: 1,915
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 634 Post(s)
Liked 444 Times
in
298 Posts
These are so cool! I don't have a bike that would work aesthetically with these bags, but I hope to eventually see one in person on a fellow C&Vers bike. I'll also keep these in mind for future builds. Best of luck with this new venture.
#5
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,435
Bikes: A bunch of old bikes and a few new ones
Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5888 Post(s)
Liked 3,471 Times
in
2,079 Posts
These are very nice bags. I'm curious but is that a sort of a Lord of the Rings map on the brown bag? It's a very striking visual.
#7
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Thanks for the compliments, folks.
bikemig That particular motif was just imagined up by me and I did not have Tolkien or anything else in mind. However, I've been heavily influenced by Tolkien's literature and artwork for years, and one of my articles was even published in Mallorn, the annual journal of the Tolkien Society. I've finished several examples of leather work inspired directly by Tolkien's charming, amateur artistry. Here's some of it... Please note that everything below is actually carved into the leather, though some of it may appear to just be ink or paint work. The colors on the purse are all leather stain applied with brushes.
I can and hope to do this level of work for cycling equipment in the future. It just takes clientele!
Cheers!
-Gregory
bikemig That particular motif was just imagined up by me and I did not have Tolkien or anything else in mind. However, I've been heavily influenced by Tolkien's literature and artwork for years, and one of my articles was even published in Mallorn, the annual journal of the Tolkien Society. I've finished several examples of leather work inspired directly by Tolkien's charming, amateur artistry. Here's some of it... Please note that everything below is actually carved into the leather, though some of it may appear to just be ink or paint work. The colors on the purse are all leather stain applied with brushes.
I can and hope to do this level of work for cycling equipment in the future. It just takes clientele!
Cheers!
-Gregory
Last edited by Kilroy1988; 05-13-20 at 05:50 PM.
Likes For Kilroy1988:
#8
car dodger
Looks like it would be a good handlebar bag also!
__________________
1989 Schwinn Paramount OS
1980 Mclean/Silk Hope Sport Touring
1983 Bianchi pista
1976 Fuji Feather track
1979 raleigh track
"I've consulted my sources and I'm pretty sure your derailleur does not exist"
1989 Schwinn Paramount OS
1980 Mclean/Silk Hope Sport Touring
1983 Bianchi pista
1976 Fuji Feather track
1979 raleigh track
"I've consulted my sources and I'm pretty sure your derailleur does not exist"
Likes For norskagent:
#9
Senior Member
Join Date: Aug 2006
Location: Valley Forge: Birthplace of Freedom
Posts: 1,299
Bikes: Novara Safari, CAAD9, WABI Classic, WABI Thunder
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 366 Post(s)
Liked 457 Times
in
240 Posts
Beautiful bags. You are incredibly talented.
If I can make a recommendation. Where the bottom piece comes up and is covered by the flap., it appears somewhat shallow. It looks like it would hold items more securely if it continued up at least halfway up the back.
Great job!
If I can make a recommendation. Where the bottom piece comes up and is covered by the flap., it appears somewhat shallow. It looks like it would hold items more securely if it continued up at least halfway up the back.
Great job!
__________________
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
Be watchful, stand firm in the faith, act like men, be strong. Let all that you do be done in love.
Likes For stevel610:
Likes For jethin:
#11
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Beautiful bags. You are incredibly talented.
If I can make a recommendation. Where the bottom piece comes up and is covered by the flap., it appears somewhat shallow. It looks like it would hold items more securely if it continued up at least halfway up the back.
Great job!
If I can make a recommendation. Where the bottom piece comes up and is covered by the flap., it appears somewhat shallow. It looks like it would hold items more securely if it continued up at least halfway up the back.
Great job!
-Gregory
#13
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Bumping this thread and willing to take reasonable offers! Both saddle bags are still available... I've got them sitting on a shelf next to my desk and they have not been mounted or used in any way since these photos were taken in Spring. Cheers!
-Gregory
-Gregory
#16
Senior Member
Join Date: Oct 2017
Location: NJ
Posts: 626
Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 204 Times
in
142 Posts
Nice.
__________________
Last new bike 1991
Last new bike 1991
#17
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,328
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 990 Times
in
522 Posts
Beautiful Bags, love the brown one and would jump on it if it were a bit cheaper.
I also think that the bottom edge of the inside is a bit low.
I would love one that is more rectangular 2 inches front to rear and about 3in tall.
I also think that the bottom edge of the inside is a bit low.
I would love one that is more rectangular 2 inches front to rear and about 3in tall.
#18
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Thanks for the compliments, folks!
Based on a calculation of the volume of a cylinder using approximate inside dimensions, it should be around 75 cubic inches.
Currently I'm busy finishing up a couple of long-term projects so making the smaller bag would be held up a bit, but I did note in my post last night that I'm open to offers on these. I suppose I should just lower the price. I'll edit the initial post as well!
As far as the lower edge being low I can see what people are saying based on the photos, but if you have the bag secured properly there's no way even a penny would slip out of there. I have been riding within a similarly designed though cheaply made eBay purchase bag that looks exactly the same for years, and have never had any issues. The straps hold the edge of the lid about half an inch below the bottom edge.
I'm asking $80 for each bag and that includes the price of shipping within the United States (lower 48). Cheers!
-Gregory
Based on a calculation of the volume of a cylinder using approximate inside dimensions, it should be around 75 cubic inches.
As far as the lower edge being low I can see what people are saying based on the photos, but if you have the bag secured properly there's no way even a penny would slip out of there. I have been riding within a similarly designed though cheaply made eBay purchase bag that looks exactly the same for years, and have never had any issues. The straps hold the edge of the lid about half an inch below the bottom edge.
I'm asking $80 for each bag and that includes the price of shipping within the United States (lower 48). Cheers!
-Gregory
#19
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
I saw these when you first posted them, but had no bike I would consider suitable to sport one. I ended up with 2 3-speeds over the summer, and the Raleigh-built Hercules might have loops on the saddle. Let me check! I know I'm getting tired of finding ways to carry the 'flat kit' for the Schwinn.
#20
Full Member
Join Date: Jul 2019
Location: Bainbridge Island, WA
Posts: 461
Bikes: '72 Peugeot PX-10, '09 A. Homer Hilsen, '78 Masi Gran Crit, '79 Echelon Spectra
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 104 Post(s)
Liked 162 Times
in
100 Posts
What is the turnaround time looking like on a black bag? Thanks!
#21
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Other than the one posted here? Quite some time, since I need to finish some other projects currently. I'm actually hoping just to sell these two at this point in time without committing to more commissions. My initial post was from last spring when I had some time to do this kind of work but no one expressed interest then!
Thanks for looking.
-Gregory
Thanks for looking.
-Gregory
#22
The dropped
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144
Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times
in
696 Posts
PM sent on the black bag.
Likes For Unca_Sam:
#24
Not lost wanderer.
Join Date: Jan 2013
Location: Lititz, Pa
Posts: 3,328
Bikes: In USA; 73 Raleigh Super Course dingle speed, 72 Raleigh Gran Sport SS, 72 Geoffry Butler, 81 Centurion Pro-Tour, 74 Gugie Grandier Sportier
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 885 Post(s)
Liked 990 Times
in
522 Posts
Thanks for the compliments, folks.
bikemig That particular motif was just imagined up by me and I did not have Tolkien or anything else in mind. However, I've been heavily influenced by Tolkien's literature and artwork for years, and one of my articles was even published in Mallorn, the annual journal of the Tolkien Society. I've finished several examples of leather work inspired directly by Tolkien's charming, amateur artistry. Here's some of it... Please note that everything below is actually carved into the leather, though some of it may appear to just be ink or paint work. The colors on the purse are all leather stain applied with brushes.
I can and hope to do this level of work for cycling equipment in the future. It just takes clientele!
Cheers!
-Gregory
bikemig That particular motif was just imagined up by me and I did not have Tolkien or anything else in mind. However, I've been heavily influenced by Tolkien's literature and artwork for years, and one of my articles was even published in Mallorn, the annual journal of the Tolkien Society. I've finished several examples of leather work inspired directly by Tolkien's charming, amateur artistry. Here's some of it... Please note that everything below is actually carved into the leather, though some of it may appear to just be ink or paint work. The colors on the purse are all leather stain applied with brushes.
I can and hope to do this level of work for cycling equipment in the future. It just takes clientele!
Cheers!
-Gregory
#25
Senior Member
Thread Starter
Join Date: Aug 2016
Location: Visalia, CA
Posts: 2,249
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 1,844 Times
in
609 Posts
Something like 21x17 inches, if I remember correctly. I made five of them over the course of two or three years, but it's been a while! I was selling them for $100-150 a piece, but I was a poor college student with nothing but time on my hands... Nowadays I'm afraid it would take quite a bit more than that to motivate me!
-Gregory
-Gregory