A quiet Friday
07-19-19, 08:00 PM
#1
Senior Member
Thread Starter
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times
in
2,295 Posts
A quiet Friday
Here's what I worked on today.
The black bike will be revisited, it's been shown in pieces here before... Bad photo in a dark and very hot garage as the paint cures. Lot's of assembly to go still including dyno hub wiring.
The fork is number three for the year. First time using this crown, pretty nice if you want narrow tire to blade clearances. Andy
__________________
AndrewRStewart
AndrewRStewart
Last edited by Andrew R Stewart; 07-19-19 at 10:43 PM. Reason: forgot to attach photos
Likes For Andrew R Stewart:
07-21-19, 07:23 AM
#2
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,387
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,687 Times
in
2,510 Posts
that fork drawing is really nice, how did you generate it?
I have a fork with that crown. I wish I had made it for 32mm tires.
Are you painting in your garage? I was thinking about your sandblast cabinet thread the other day.
I have a fork with that crown. I wish I had made it for 32mm tires.
Are you painting in your garage? I was thinking about your sandblast cabinet thread the other day.
07-22-19, 01:29 PM
#3
Senior Member
Thread Starter
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times
in
2,295 Posts
Eric- I had the bike wet sprayed by a local powder coater. Sandblast, phosphate application, primer and color with only my "S" head badge being masked cost about $150. I then applied my SSKInk decals and sprayed clear rattler can 2 part paint. I did try to do the first coat in the garage but thought better after the first tube was done. I finished up in the driveway, upwind. Andy
__________________
AndrewRStewart
AndrewRStewart
