Ideas for bar upgrade/extensions for comfort
#1
Full Member
Thread Starter
Join Date: Aug 2019
Posts: 249
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Liked 88 Times
in
57 Posts
Ideas for bar upgrade/extensions for comfort
I am enjoying my first couple of months on my new bike after not riding for literally decades!
I have a flat bar hybrid and am very happy with it. As I start to approach 15+ mile rides, I am considering options for more comfort and hand positions to avoid stiff wrists. Not looking for drop bar conversion.
Done a bit of research on old threads but figured a “bump” on the topic couldn’t hurt in case anyone has suggestions or experience with options that worked/not worked for them.
Any help appreciated, it you can include the brand/name that would be great.
Here is the bike, CTY 1.1
Last edited by CyclingBK; 09-15-19 at 08:04 PM.
#2
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,141
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1446 Post(s)
Liked 762 Times
in
570 Posts
You can do bar ends, and you can also try butterfly bars. I have this bar on one of my bikes, and really enjoy all the different ways you can use them and set them up. One advantage I think they have is you have more fore/aft difference in them. You can hold the bottom flats and sit way up, or you can hold anywhere along the sides for both a different wrist position and a different back position (similar to drops), and you can even lean way forward and hold the fronts.
With drop bars, the brake levers and shifting are available only if you're on the hoods or holding in the drops. If you're holding the top, you have to move your hands to get there. Butterfly bars are similar, except opposite. The way most people set them up, the brake levers and shifters are on the bottom flats (similar to riding the tops on a drop bar), and your more racy positions (the sides or the fronts) are without brakes or shifters. This is not unlike dedicated bar ends, where you may be riding on the bar ends and would have to move your hands over to the brakes to use them.
Fortunately, there is a ton of variety, and something out there to suit us all!
With drop bars, the brake levers and shifting are available only if you're on the hoods or holding in the drops. If you're holding the top, you have to move your hands to get there. Butterfly bars are similar, except opposite. The way most people set them up, the brake levers and shifters are on the bottom flats (similar to riding the tops on a drop bar), and your more racy positions (the sides or the fronts) are without brakes or shifters. This is not unlike dedicated bar ends, where you may be riding on the bar ends and would have to move your hands over to the brakes to use them.
Fortunately, there is a ton of variety, and something out there to suit us all!
#3
Senior Member
Join Date: Aug 2012
Location: Los Alamitos, Calif.
Posts: 2,475
Bikes: Canyon Endurace
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1041 Post(s)
Liked 923 Times
in
540 Posts
You bike appears to have the current handlebars set high enough in order to accommodate a more upright and relaxed posture. This would usually reduce hand fatigue for most people. You mentioned that you have just returned to cycling but you mention nothing about your mileage or time on the bike. You may still be in sort of a "break-in" period and your body is still trying to become accustomed to riding and the challenges is produces.
If not, try some bar ends or maybe even a new stem that would increase the angle so you're not too bent over when you ride. Check our Ergon. They have a huge line of grips in various configurations.
If not, try some bar ends or maybe even a new stem that would increase the angle so you're not too bent over when you ride. Check our Ergon. They have a huge line of grips in various configurations.
#4
Senior Member
Inboard mounted bar ends wrapped in bar tape have been working great for me.
#5
Senior Member
I have a flat bar hybrid and am very happy with it. As I start to approach 15+ mile rides, I am considering options for more comfort and hand positions to avoid stiff wrists. Not looking for drop bar conversion.
Done a bit of research on old threads but figured a “bump” on the topic couldn’t hurt in case anyone has suggestions or experience with options that worked/not worked for them.
Any help appreciated, it you can include the brand/name that would be great.
#6
Senior Member
Look at the Jones bar... has many hand and body positions.
I had the same problem as you, but now I have Jones bars on both my bikes. Hand fatigue never is an issue anymore.
I had the same problem as you, but now I have Jones bars on both my bikes. Hand fatigue never is an issue anymore.
#7
Full Member
Thread Starter
Join Date: Aug 2019
Posts: 249
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 92 Post(s)
Liked 88 Times
in
57 Posts
You bike appears to have the current handlebars set high enough in order to accommodate a more upright and relaxed posture. This would usually reduce hand fatigue for most people. You mentioned that you have just returned to cycling but you mention nothing about your mileage or time on the bike. You may still be in sort of a "break-in" period and your body is still trying to become accustomed to riding and the challenges is produces.
If not, try some bar ends or maybe even a new stem that would increase the angle so you're not too bent over when you ride. Check our Ergon. They have a huge line of grips in various configurations.
If not, try some bar ends or maybe even a new stem that would increase the angle so you're not too bent over when you ride. Check our Ergon. They have a huge line of grips in various configurations.
Thanks!
Im just getting to the 15 mile rides, takes me a little over an hour. I’d like to get to 20 or so.
Mostly, I feel like my posture and position are very comfortable but my fingers seem to get a little numb later in the ride. I’m trying to stay conscious of not bending my wrists and lessening my grip pressure . But it would still be nice to have my palms face each other a bit a times.
Last edited by CyclingBK; 09-16-19 at 10:02 AM.
#8
Deraill this!
Join Date: Jun 2019
Location: Central Ohio
Posts: 617
Bikes: 18 Cdale Quick 1, 94 S-Works M2, 98 730 Multitrak, and a few others
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 143 Post(s)
Liked 427 Times
in
248 Posts
I had good luck with these bar ends when I had a flat-bar hybrid.
#9
Senior Member
Join Date: Feb 2017
Location: Northern Shenandoah Valley
Posts: 4,141
Bikes: More bikes than riders
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1446 Post(s)
Liked 762 Times
in
570 Posts
The great thing about this type of bar is its 22.2mm diameter, so it takes all the standard flat bar cockpit stuff (levers, shifters, mirrors, etc). I'm using mine with a pair of short-pull brake levers (for my cantilever brakes) and a pair of Microshift thumb shifters (9-speed index, but I'm using these in friction mode on a 7-speed cassette). I also do one layer of wrap with a rubber inner tube first, then do a second layer of with proper handlebar tape. The overall diameter is very nice (about 40mm).
You also get some compliance with this bar design, as it naturally flexes with weight on it. Flat bars, especially 31.8mm clamp ones like you have, are pretty rigid, and that's another contributing factor for hand fatigue.
IMG_20190916_124136269 by jnjadcock, on Flickr
#10
Senior Member
Join Date: Mar 2019
Location: San Tan Valley, Az
Posts: 67
Bikes: 2019 Salsa TimberJack
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 23 Times
in
13 Posts
I use the following bars - Velo Orange Crazy Bars . They are compatible with flat bar setup. I had them on my hybrid and now on my mountain bike.
Here is they are on my bike:
My battleship
Here is they are on my bike:
My battleship
Likes For rodgeman:
#13
Deraill this!
Join Date: Jun 2019
Location: Central Ohio
Posts: 617
Bikes: 18 Cdale Quick 1, 94 S-Works M2, 98 730 Multitrak, and a few others
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 143 Post(s)
Liked 427 Times
in
248 Posts
Here are the bar ends and pics of the install. I got them at the LBS for around $20. I might add tape in the future.
#15
aka Phil Jungels
I like Specialized Overendz bar ends. The most comfortable ones I have ever used, and converted both my bikes to them.
#16
Senior Member
Join Date: Jul 2008
Location: 25 miles northwest of Boston
Posts: 29,549
Bikes: Bottecchia Sprint, GT Timberline 29r, Marin Muirwoods 29er, Trek FX Alpha 7.0
Mentioned: 112 Post(s)
Tagged: 0 Thread(s)
Quoted: 5224 Post(s)
Liked 3,581 Times
in
2,342 Posts
I "roadified" a hybrid for commuting & just swapped drop bars onto it. I have a MTB now that came with small bar ends
I like them way far forward
they were useful for this purpose but I took them off last winter to add bar mitts. when the bar mitts came off in the spring, I realized I had some older ends so thought I would try them & I like them a little more I think
sometimes I do like to ride w/ just my palms on the top of them so those Specialized Overendz that @Wanderer mentioned, look useful!
I like them way far forward
they were useful for this purpose but I took them off last winter to add bar mitts. when the bar mitts came off in the spring, I realized I had some older ends so thought I would try them & I like them a little more I think
sometimes I do like to ride w/ just my palms on the top of them so those Specialized Overendz that @Wanderer mentioned, look useful!
Likes For rumrunn6: