Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Degrees? Percentages?

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Degrees? Percentages?

Old 03-25-21, 10:35 AM
  #1  
Elbeinlaw
Senior Member
Thread Starter
 
Join Date: Jun 2020
Posts: 281
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 100 Times in 68 Posts
Degrees? Percentages?

I'm confused about the connection between degrees of slope and percentages of slope. I want to be real clear up front: I've looked at the detailed sciento-mathematical descriptions on the internet, and they don't give me what I want. I don't want another definition of how each is figured. That won't help.

What I want is to be able to translate--approximately, and in very broad strokes--percentages to degrees, or degrees to percentages as I'm riding and looking at maps and tour guides. As an example of what I'm looking for: I know that a 5 degree slope is going to be hard for me; but what's its equivalent in %s? Yes, the answer to that question will help me, but what I really need ... I need to have a rule of thumb to work with. Anybody willing to give me information that will get me 80% of the way to an accurate translation of degrees to percentages and vice-versa?
Elbeinlaw is offline  
Old 03-25-21, 11:09 AM
  #2  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,453
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3634 Post(s)
Liked 5,311 Times in 2,699 Posts
I don't know that you'll find an easy way you can do this in your head. It's definitely too complicated for me.https://sciencing.com/convert-percen...s-8093249.html I wonder if it's often necessary to do this. It might be easier to just get used to dealing with both measurements. Sort of like when we talk about bike sizes in inches or cm. Most folks know their size either way w/o actually doing a conversion. Hope this makes sense. Edit- If you use something like RWGPS you'll have consistent measurements.

Last edited by shelbyfv; 03-25-21 at 11:16 AM.
shelbyfv is offline  
Old 03-25-21, 11:12 AM
  #3  
Iride01 
I'm good to go!
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 14,800

Bikes: Tarmac Disc Comp Di2 - 2020

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6099 Post(s)
Liked 4,730 Times in 3,260 Posts
basically rise over run for grade or percent. The other is simply a degree as in angular measurement from the horizontal.

A 100% grade will be a 45° slope.
Iride01 is offline  
Likes For Iride01:
Old 03-25-21, 11:17 AM
  #4  
bOsscO
bOsscO
 
bOsscO's Avatar
 
Join Date: May 2006
Location: Vancouver
Posts: 748

Bikes: 2015 Norco Search S1, 93 Mongoose IBOC COMP

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 292 Post(s)
Liked 353 Times in 211 Posts
Roofers gotchu covered (at least for a certain range)!
bOsscO is offline  
Old 03-25-21, 11:21 AM
  #5  
bOsscO
bOsscO
 
bOsscO's Avatar
 
Join Date: May 2006
Location: Vancouver
Posts: 748

Bikes: 2015 Norco Search S1, 93 Mongoose IBOC COMP

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 292 Post(s)
Liked 353 Times in 211 Posts
Here's another one that includes lower pitches.
bOsscO is offline  
Old 03-25-21, 11:26 AM
  #6  
Wildwood 
Veteran, Pacifist
 
Wildwood's Avatar
 
Join Date: Dec 2004
Location: Seattle area
Posts: 13,303

Bikes: Bikes??? Thought this was social media?!?

Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3874 Post(s)
Liked 4,779 Times in 2,204 Posts
It's complicated


Best follow what's known as Eddy's Rule,
modified for reality in consumer societies.
Ride up grades before buying upgrades.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Wildwood is online now  
Likes For Wildwood:
Old 03-25-21, 11:34 AM
  #7  
Elbeinlaw
Senior Member
Thread Starter
 
Join Date: Jun 2020
Posts: 281
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 100 Times in 68 Posts
OK, thanks. That helps. But a couple of questions--

Originally Posted by bOsscO
Roofers gotchu covered (at least for a certain range)!
1. Are those Canadian degrees? Aren't they 10% bigger than American degrees? (Sorry sorry sorry.)
2. So if 45% is (according to this diagram) 12/12m, which is 100%, then I can I extrapolate arithmatically to 6/12 would be 50% and 22.5 degrees? Which is important at the lesser angles, the ones we typically encounter riding, i.e. 2/24 = 15% more or less or 9.2 degrees? Or is there some trigonometric factor that varies it from the strictly arithmatic?
Elbeinlaw is offline  
Old 03-25-21, 11:42 AM
  #8  
Hiro11
Senior Member
 
Join Date: Jun 2010
Posts: 2,608

Bikes: 2022 Specialized Allez Sprint custom build, 2019 Giant Defy Advanced Pro 0, 2018 Seven Mudhoney Pro custom build, 2017 Raleigh Stuntman, various others

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 782 Post(s)
Liked 475 Times in 238 Posts
If I remember high school trigonometry, the tangent of the angle of the grade is the percentage grade. For example, the tangent of 45 degrees is 1 (or 100%).
Hiro11 is offline  
Likes For Hiro11:
Old 03-25-21, 11:44 AM
  #9  
Iride01 
I'm good to go!
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 14,800

Bikes: Tarmac Disc Comp Di2 - 2020

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6099 Post(s)
Liked 4,730 Times in 3,260 Posts
https://www.archtoolbox.com/represen...try/slope.html
Iride01 is offline  
Old 03-25-21, 11:55 AM
  #10  
John Valuk
Full Member
 
Join Date: Oct 2020
Posts: 267
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 80 Post(s)
Liked 167 Times in 108 Posts
Originally Posted by Elbeinlaw
I'm confused about the connection between degrees of slope and percentages of slope. I want to be real clear up front: I've looked at the detailed sciento-mathematical descriptions on the internet, and they don't give me what I want. I don't want another definition of how each is figured. That won't help.

What I want is to be able to translate--approximately, and in very broad strokes--percentages to degrees, or degrees to percentages as I'm riding and looking at maps and tour guides. As an example of what I'm looking for: I know that a 5 degree slope is going to be hard for me; but what's its equivalent in %s? Yes, the answer to that question will help me, but what I really need ... I need to have a rule of thumb to work with. Anybody willing to give me information that will get me 80% of the way to an accurate translation of degrees to percentages and vice-versa?
Decide on the range of slopes you actually expect to encounter, then make yourself a couple of tables covering that range:
  • one table showing percent grade to degrees
  • one table showing degrees to percent grade
After a while, you may develop a better intuitive feel for the unit with which you were originally unfamiliar.
John Valuk is offline  
Likes For John Valuk:
Old 03-25-21, 11:58 AM
  #11  
bOsscO
bOsscO
 
bOsscO's Avatar
 
Join Date: May 2006
Location: Vancouver
Posts: 748

Bikes: 2015 Norco Search S1, 93 Mongoose IBOC COMP

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 292 Post(s)
Liked 353 Times in 211 Posts
Originally Posted by Elbeinlaw
1. Are those Canadian degrees? Aren't they 10% bigger than American degrees? (Sorry sorry sorry.)
2. So if 45% is (according to this diagram) 12/12m, which is 100%, then I can I extrapolate arithmetically to 6/12 would be 50% and 22.5 degrees? Which is important at the lesser angles, the ones we typically encounter riding, i.e. 2/24 = 15% more or less or 9.2 degrees? Or is there some trigonometric factor that varies it from the strictly arithmatic?
No, you cannot directly extrapolate. As the charts show 6/12 is 26.5° which is larger than the 22.5° you've calculated.
As shelbyfv noted there is no easy way you can do this in your head. Best to use one of the calculators provided. OR, don't worry about it and just climb.
bOsscO is offline  
Old 03-25-21, 12:25 PM
  #12  
msu2001la
Senior Member
 
msu2001la's Avatar
 
Join Date: Mar 2006
Location: Chicago, IL, USA
Posts: 2,870
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1455 Post(s)
Liked 1,477 Times in 867 Posts
Originally Posted by Elbeinlaw
1. Are those Canadian degrees? Aren't they 10% bigger than American degrees? (Sorry sorry sorry.)
2. So if 45% is (according to this diagram) 12/12m, which is 100%, then I can I extrapolate arithmatically to 6/12 would be 50% and 22.5 degrees? Which is important at the lesser angles, the ones we typically encounter riding, i.e. 2/24 = 15% more or less or 9.2 degrees? Or is there some trigonometric factor that varies it from the strictly arithmatic?
You could use an online calculator and plug in values for typical gradients that we encounter as cyclists.
https://www.calcunation.com/calculat...to-percent.php

1 degree = 1.8%
2 degrees = 3.5%
3 degrees = 5.2%
4 degrees = 7.0%
5 degrees = 8.8%
6 degrees = 10.5%
7 degrees = 12.3%
8 degrees = 14.1%
9 degrees = 15.8%
10 degrees = 17.6%

I'm curious as to what kind of maps/routes you're looking at that are using degrees instead of slope %?
msu2001la is offline  
Likes For msu2001la:
Old 03-25-21, 12:41 PM
  #13  
Wildwood 
Veteran, Pacifist
 
Wildwood's Avatar
 
Join Date: Dec 2004
Location: Seattle area
Posts: 13,303

Bikes: Bikes??? Thought this was social media?!?

Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3874 Post(s)
Liked 4,779 Times in 2,204 Posts
Is the analysis for the purpose of general knowledge about the grades/percentages you ride? - or to measure and document the grades on given routes?

If the latter, PLEASE, come ride with me for a month - with an end goal of creating a detailed set of cycling maps Distances and elevations are readily available, but to include all the gradients and flats in those climbs is more important to many than the elevation change. Or is that already on cycling maps/apps?

There used to be a great cycling map of the Santa Cruz Mts.
What a great app! Better than GPS.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Wildwood is online now  
Old 03-25-21, 01:19 PM
  #14  
Elbeinlaw
Senior Member
Thread Starter
 
Join Date: Jun 2020
Posts: 281
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 100 Times in 68 Posts
I'd love to. I love the PNW.
Elbeinlaw is offline  
Old 03-25-21, 01:42 PM
  #15  
shelbyfv
Expired Member
 
shelbyfv's Avatar
 
Join Date: Jun 2007
Location: TN
Posts: 11,453
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3634 Post(s)
Liked 5,311 Times in 2,699 Posts
[QUOTE=Wildwood;21984704] Distances and elevations are readily available, but to include all the gradients and flats in those climbs is more important to many than the elevation change. Or is that already on cycling maps/apps?/QUOTE] RWGPS is free unless you want some extra features. You can make your own map or look at maps other folks have done. You can move your cursor along the gradient display at the bottom to see how much you'll suffer (in %.)
shelbyfv is offline  
Likes For shelbyfv:
Old 03-25-21, 01:55 PM
  #16  
Elbeinlaw
Senior Member
Thread Starter
 
Join Date: Jun 2020
Posts: 281
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 100 Times in 68 Posts
Why I was asking

MSU: Thanks, this is perfect. Just exactly what I needed.

I see that people curious about what I'm doing with the data and where I see it. I'm working on strengthening my riding (and I'm a map nut, too), so I'm conscious of the grades I'm riding, always trying to bump up my threshhold.

In the process, I have discovered that cyclists and SOME maps talk about %s. But vehicles and signage and OTHER maps tend to use degrees. When I have used my pickup truck to scout routes, the truck records slopes in degrees. Because of the track, I now can more or less recognize a 3 degree slope from a 5 degree slope. But when I look at a cyclist's notes, they use percentages. But these are very, very different: a 5 degree slope is killer (for me) and a 5 percent slope is just hard. Eventually, I'll develop a gut instinct, but I'm a data-to-gut person, not a gut-to-data.

You have all given me just exactly what I need. Thank you.
Elbeinlaw is offline  
Likes For Elbeinlaw:
Old 03-25-21, 02:05 PM
  #17  
mercator
In the wind
 
mercator's Avatar
 
Join Date: Aug 2006
Location: Calgary AB
Posts: 1,336

Bikes: Giant TCR Advanced Team, Lemond Buenos Aires, Giant TCX, Miyata 1000LT

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 172 Post(s)
Liked 120 Times in 54 Posts
Please show an example of a road sign indicating slope in degrees.
mercator is offline  
Likes For mercator:
Old 03-25-21, 02:07 PM
  #18  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4741 Post(s)
Liked 3,860 Times in 2,509 Posts
For while you ride math in your head:

25% = 14 degrees. (Very near exact!)
10% < 6 degrees (5.71)

0.56 % per degree Edit: I got these mis-labeled!
1.78 degrees per %

The plot between percent and degrees is nearly a straight line between 0 and 30 degrees.

Edit: this is trig. Past 30 degrees and the conversion becomes less and less linear. (Down to 0.45 degrees per % at 45 degrees and 0.35 degrees per % at 60 degrees. Good thing is that we don't spend a lot of time riding at those angles.

Last edited by 79pmooney; 03-27-21 at 05:48 PM. Reason: Small but crucial labeling mistake
79pmooney is offline  
Old 03-25-21, 02:14 PM
  #19  
Elbeinlaw
Senior Member
Thread Starter
 
Join Date: Jun 2020
Posts: 281
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 100 Times in 68 Posts
Might've put that backwards. Anyway, though, my truck measures slope in degrees, which is what started this whole thing.

Elbeinlaw is offline  
Old 03-25-21, 02:25 PM
  #20  
Troul 
Senior Member
 
Troul's Avatar
 
Join Date: Oct 2013
Location: Mich
Posts: 7,291

Bikes: RSO E-tire dropper fixie brifter

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,909 Times in 1,884 Posts
kick it in the 52/11 with a 10 mph or higher headwind to simulate the climb.
__________________
-Oh Hey!
Troul is offline  
Old 03-25-21, 08:57 PM
  #21  
Doug64
Senior Member
 
Doug64's Avatar
 
Join Date: Mar 2009
Location: Oregon
Posts: 6,484
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1182 Post(s)
Liked 830 Times in 433 Posts
Rise/ Run = % Slope
Doug64 is offline  
Old 03-25-21, 10:28 PM
  #22  
jaxgtr
Senior Member
 
jaxgtr's Avatar
 
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,830

Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7, Trek Emonda ALR, Trek FX 5 Sport

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 751 Post(s)
Liked 1,666 Times in 980 Posts
Originally Posted by bOsscO
Roofers gotchu covered (at least for a certain range)!
When I saw this question, this is exactly what I thought about, roofing. I used to do roofing in the summer as a teenager, suck job, but it taught me this stuff.
__________________
Brian | 2023 Trek Domane SLR 7 AXS | 2023 Trek CheckPoint SL 7 AXS | 2016 Trek Emonda ALR | 2022 Trek FX Sport 5
Originally Posted by AEO
you should learn to embrace change, and mock it's failings every step of the way.



jaxgtr is offline  
Old 03-25-21, 11:06 PM
  #23  
Retro Grouch 
Senior Member
 
Retro Grouch's Avatar
 
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225

Bikes: Catrike 559 I own some others but they don't get ridden very much.

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 642 Times in 363 Posts
Originally Posted by Iride01
basically rise over run for grade or percent. The other is simply a degree as in angular measurement from the horizontal.

A 100% grade will be a 45° slope.
What Iride said. Everybody way overestimates the number of degrees in a hill slope. 10% is a pretty serious hill when you are riding up it but it's only 4.5 degrees.
__________________
My greatest fear is all of my kids standing around my coffin and talking about "how sensible" dad was.
Retro Grouch is offline  
Old 03-25-21, 11:44 PM
  #24  
downtube42
Senior Member
 
downtube42's Avatar
 
Join Date: Oct 2008
Location: Portland, OR
Posts: 3,802

Bikes: Trek Domane SL6 Gen 3, Soma Fog Cutter, Focus Mares AL, Detroit Bikes Sparrow FG, Volae Team, Nimbus MUni

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 878 Post(s)
Liked 2,019 Times in 1,055 Posts
Originally Posted by jaxgtr
When I saw this question, this is exactly what I thought about, roofing. I used to do roofing in the summer as a teenager, suck job, but it taught me this stuff.
I used to have a carpenter buddy who'd say he didn't understand math, but flawlessly calculated construction dimensions. He's shrug and say it was just numbers.
downtube42 is offline  
Old 03-26-21, 07:18 AM
  #25  
wphamilton
Senior Member
 
wphamilton's Avatar
 
Join Date: Apr 2011
Location: Alpharetta, GA
Posts: 15,280

Bikes: Nashbar Road

Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 2934 Post(s)
Liked 341 Times in 228 Posts
I think it just needs a diagram to be made clear:

wphamilton is offline  
Likes For wphamilton:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.