How much travel do I need?
04-24-12, 07:54 AM
#1
Sucking Wheel at the back
Thread Starter
Join Date: Jul 2009
Location: Bristol, VA
Posts: 779
Bikes: Lynskey Helix Sport, Lynskey M290, Cervelo S3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
How much travel do I need?
I have been riding my Lynskey Pro29 with a Reba RL 100mm fork. It seems that I am constantly bottoming out my fork. (As in the rubberband on the fork tube is always at the top of the fork.
Is this a sign that I need a longer travel fork?
Is this a sign that I need a longer travel fork?
04-24-12, 08:02 AM
#2
Gone.
Join Date: May 2011
Posts: 509
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Using all your travel is not necessarily a bad thing, but if you're bottoming the fork out too frequently, you might solve the problem by increasing the air pressure (and therefore the spring rate) in the fork. Could be it's not set up right for your weight.
04-24-12, 08:07 AM
#3
one less horse
You should be bottoming your fork occasionally. If you're bottoming out hard or all the time, that's an indication you would be better suited with a stiffer spring.
04-25-12, 08:24 PM
#6
Senior Member
Join Date: Aug 2005
Posts: 757
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
If I went mountain biking and didn't bottom out the fork, I'd think something was wrong. I use all the travel regardless of how much there is - if the bike has more suspension, I go faster and hit things harder. That's what it's there for.
